Solidly mount your Tilta Mirage matte box onto your camera rig using this Quantum Matte Box Hanger System + 2 Twig Handles and 4" Rods from GLOBAL DYNAMICS UNITED. This durable aluminum frame features multiple thumbscrews to mount your Mirage matte box onto the front of your camera lens, and it features two 15mm LWS rod clamps on each side for connection to your system to mount the two included 4" rods for setup on either side.

You can also add the two included Twig side handles when you want to go handheld, since the solid frame mounts tightly enough to support your full rig, and optional Atlas side handles are available separately. The side handles feature multiple M4, 1/4"-20, and 3/8"-16 anti-twist threads for mounting additional accessories. With a separately available 15mm rod clamp, it can mount onto the RED V-RAPTOR using the rods, or you can mount the Twig handles directly onto the V-RAPTOR sides. It is compatible with standard 15mm rods or with the separately available lightweight GDU Ultralite 15mm rods of different lengths.

Base Quantum Matte Box Hanger    Durable Aluminum Frame    15mm LWS Rod Clamps    Two 4" 15mm Rods    Includes Two Twig Side Handles    1/4"-20, M4 & 3/8"-16 Threads on Handles    Mounts Mirage Tightly with Thumbscrews    Can Mount onto RED V-RAPTOR with Clamp

Related Questions and Answers

Q: 1. How many filters can the circular filter holder hold at a time?

A: The Tilta Mirage Matte Box may only hold one Tilta Circular 95mm Filter at a time but it does have an optional 4 x 5.65" stackable filter tray that would allow you to add another filter to the matte box. See: https://bhpho.to/3LCDlWg

Q: 2. Please specify light transmission loss for Tilta 95mm CP for Mirage MB. 1 stop? 1.5?

A: According to the manufacturer, the Tilta 95mm Circular Polarizer for Mirage Matte Box cuts out about 1.5 - 2 stops.

Q: 3. Does the power supply for the motor need to be removed when not in use? When I leave it connected it drains the battery even when the motor is off.

A: When the Tilta Mirage Motorized VND Kit is not being used, to best maintain current battery levels the power supply should be disconnected from the motor.

Q: 4. Would this fit on a DZOfilm 20-55 (front diameter 95mm, filter thread 86mm) lens w/out vignetting?

A: The Tilta Mirage Matte Box's 95m clamp will attach to the 95mm front of the DZOFilm Pictor 20 to 55mm T2.8 Super35 Parfocal Zoom Lens.

Q: 5. Hi, can the remote control any secondary Nano or M motors or can it ONLY control the VND motor? If so, how many motors can it control at once?

A: The Wireless Controller for Mirage included with the Tilta Mirage Motorized VND Kit can control a single Tilta Nucleus M motor or Tilta Nucleus Nano motor or Wireless Motor for Mirage at a time.

Q: 6. Which one is best used with a RED Komodo?

A: You should go with the 120mm version.

Q: 7. Is the height adjustable? And if so what is the range?

A: Yes, you can raise and lower the support of the Tilta 15mm LWS Support for Mirage Matte Box (B&H# TIMBT16LS) by about 1/2" (or about 1.25cm).

Q: 8. will this slide into the Freewell Eiger MatteBox?

A: The Tilta 95mm Circular Polarizer will only support the Tilta Mirage matte box. For the Eiger Matte Box, you would need to work with the Freewell VND Adapter for Eiger Matte Box. Freewell True Color 1 to 5, 6 to 9-Stop VND & CPL Filters for Eiger Matte Box (132.5 x 113.28mm) BH #FRFWEGMBVND https://bhpho.to/3T63lit

Q: 9. Will this fit the SmallRig Mini Matte Box?

A: The Tilta Adapter Ring for Tilta Mirage Matte Box (58mm) is designed for the use with only Tilta products, as Smallrig molds their products differently and with no relevance to the Mirage. It will not provide compatibility.

Q: 10. What is the widest focal length (in full frame) without vignetting?

A: The Tilta 95mm Circular Polarizer for Mirage Matte Box can support 24mm without vignetting on full frame.