Complete your fiber optic network installation with this 1000Base Duplex LC Multi-Mode SFP Transceiver from Luminex. This hot pluggable SFP transceiver includes a duplex LC connector and can transfer up to 1.25 Gb/s across up to 1804 feet of multi-mode fiber cable supporting an 850nm wavelength.

Duplex LC Connector    Multi-Mode Fiber Support    Up to 1.25 Gb/s Throughput    850nm Wavelength    Up to 1804' Range    Hot Pluggable

Related Questions and Answers

Q: 1. Can you connect 2 hubs together to expand the system? Potentially upto 16 users?

A: Yes, two Eartec HUB Mini Duplex Transceiver Bases can be connected in order to use 16 wireless remote headsets simultaneously. You can connect the two HUBs using the Eartec Interlink Cable for HUB Mini Base (B&H # EAHB35IL).

Q: 2. Do I need a wired headset for the hub to work?

A: The Eartec HUB Mini Duplex Transceiver Base can be used with 1 wired headset and up to 8 wireless remote headsets. For a wired headset. you can use the Eartec Max 4G Single Headset with Dual 3.5-2.5mm Connectors (B&H # EAHUBMX) or the Eartec Max 4G Double Headset with Dual 3.5-2.5mm Connectors (B&H # EAHUBMXD). For the wireless headsets, you can use the Eartec UltraLITE Single-Ear Remote Headset with Rechargeable Lithium Battery - USA Version (B&H # EAULSR) or the Eartec UltraLITE Dual-Ear Remote Headset with Rechargeable Lithium Battery - USA Version (B&H # EAULDR).

Q: 3. what Is the port for the wired 7th headset? 3PIN? 4PIN? 5PIN? 1/4?

A: The port for the Eartec HUB Mini Duplex Transceiver is a proprietary 2 prong connector. Similar to a 2 prong comstar connector. The 2 prong connector with 4' bare cable and pinout is available for 21.75 through the Eartec.

Q: 4. Since this hub will become the new master where all headsets will connect to, can existing master set act like a normal set and connect to the hub? This will determine if we need to buy new non-master set or stick to the existing master.

A: You would have a buy a new remote headset, because the new master headset would be connected to the hub with a cable.

Q: 5. Can you use this to trigger monolights?

A: I tryed to trigger my profoto b1 and d1, with very poor inconsistent results, and ttl did not work at all with my fuji x-t2

Q: 6. Will this directly control a Sony F43M Flash (w/o a transceiver on the flash)? Or will I need a transceiver for both the camera and flash?

A: You would need two of the V6 II units in order to trigger your flash. One unit would act as the transmitter on top of your camera while the other fits on the bottom of your flash as a receiver.

Q: 7. I want connect mg a6300 to a youngnuo 568 flash (for canon) with cactus v6iis . will convert sony p-ttl to canon e-ttl?

A: High-speed sync only now. They have announced a firmware update coming soon for Sigma, Sony and Fujifilm cameras that will the camera's TTL profiles. Then they will release upgrades for Canon, Nikon, Olympus, Panasonic and Pentax one at a time. So your a6300 should be in line for the first upgrade to the Cactus V6ii.

Q: 8. Can I use different flash brands together with this transceiver? Like Canon and Sony flashes at the same time?

A: Yes. Each unit in receiver mode can have different brand flashes attached. Do note that if you use TTL passthrough for a flash on the transmitter mode unit on the camera, the flash must match the camera. The receiver mode units cannot do TTL at all, just manual (controlled from the unit acting as the transmitter). Also, since Sony uses non-standard hotshoes, you must use a V6 II for the Canon flash and a V6 IIs for the Sony flash. They will still communicate fine.

Q: 9. Does this take the same battery as the eartec head sets? There doesnt seem to be any info on it. Cheers.

A: Yes it takes the same battery as the head sets.

Q: 10. I just switch from Nikon to Sony. I have 4 cactus trigger with Nikon shoe. If I buy a cactus with Sony shoe, would it communicate with the rest?

A: You would be able to fire a Cactus V6 II unit for Nikon with the Cactus V6 II unit for Sony with a firmware update.