With improved Syncoder 3.0 algorithm and intelligent DSP chip, the stone blue WAir-P1ST Wireless Microphone System from Synco offers stable audio signal to your Android device to record high-quality audio for your vlogs, interviews, and other content creation endeavors. A dual-channel, plug-in receiver connects directly to your Android device with its integrated USB-C connector, while one compact transmitter with built-in condenser microphone delivers an audio signal from up to 492' via line-of-sight transmission. The system itself automatically pairs for an intuitive, plug-and-play experience.

Onboard buttons on the transmitter unit toggle noise reduction to filter out low-frequency distortion. Volume control on the receiver can adjust your audio up to five levels for a maximum gain of 50 dB, with the option to mute the mic by double pressing. Halo-style LED indicators on all components show the working status of the system. The transmitter features a built-in 120mAh battery, which runs for five hours at a time. Recharge using the included charging case with 10 minutes of quick charging for 45 minutes of recording, and two additional charges for 15 hours of total recording.

For Content Creation, Vlogging    Clip-On Transmitter with Mic    Dual-Channel Plug-In Receiver    USB-C Connector for Android Devices    Auto Pairing, Plug-and-Play Interface    492' Line-of-Sight Transmission Distance    Encrypted DSP Transmission Chip    Onboard Volume Button on Receiver    LED Light Strip Indicator    Charging Case, 15-Hour Runtime

• 2.4 GHz wireless bandwidth with digital signal processing chip and proprietary encryption
• 492' line-of-sight transmission distance, 164' obstructed transmission distance
• Compact transmitter with built-in condenser microphone and noise cancellation
• Dual-channel receiver with volume control
• Integrated USB-C connector for Android devices
• Dynamic LED light strips on each component
• Charging case with 2-hour recharge, ten minute fast charging
• Built-in transmitter 120mAh batteries with 5-hour runtime
• Furry windscreen for transmitter

Related Questions and Answers

Q: 1. Will this work with a gopro 4?

A: The Synco WAir-G1-A1 will work with any camera or device with a 3.5mm TRS audio input. If your camera does not have a 3.5mm audio input jack and only accepts mic input over USB, a USB-C to 3.5mm adapter will be required.

Q: 2. Did the transmitter have internal recording?

A: No, the transmitters in the Synco WAir-G2-A2 Ultracompact 2-Person Digital Wireless Microphone System for Mirrorless/DSLR Cameras do not have the ability to record audio internally.

Q: 3. how do you connect the receiver to a camera cold shoe or cage 1/4" screw?

A: The plastic clip on the receiver body is designed to slip into a cold shoe slot for on-camera mounting.

Q: 4. Will this come with lav mics?

A: Yes, lavalier mics are included with the Synco WAir wireless mic system.

Q: 5. Can a use other higher quality lavalier mic's with this?

A: Although not specified, the Synco WAir-G2-A2 Ultracompact 2-Person Digital Wireless Microphone System for Mirrorless/DSLR Cameras should presumably be compatible for use with third party lavalier microphones featuring a non-locking 3.5mm connection.

Q: 6. Are these mono or stereo?

A: The output from the receiver is dual mono. The connector is 3.5mm TRS and sends a combined signal with both mics to your camera or recorder. The audio is the same on the left and right sides.

Q: 7. What ac power is recommended for charge?

A: You can use any USB wall charger with the Synco WAir-G2-A2 Ultracompact 2-Person Digital Wireless Lavalier Microphone System, like you would use to charge a smartphone. For example, the ChargeWorx Dual USB Type-A Wall Charger (B&H # CHACX2603BK), the GyroVu 5V 3.1A USB Type-A AC Adapter (B&H # GYGVUSBPS3), or the Belkin Boost Charge 24W Dual USB Type-A Wall Charger (B&H # BEWCB2DQWH) will all work for charging the Synco WAir-G2-A2 system.

Q: 8. Hi! assuming this would work with an iPhone using a lightning to 3.5mm adapter? thanks!

A: Yes, all you will need is the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP). Simply attach it to the TRRS end of the 3.5mm TRS to TRRS Output Cable for Smartphones that comes with the Synco wireless system and then connect it to your iPhone and you'll be ready to go.

Q: 9. Hello, are these work with Samsong galaxy not or not?

A: Yes, the Synco WAir-G1-A1 Ultracompact Digital Wireless Microphone System for Mirrorless/DSLR Cameras will work with the Samsung Galaxy Note line of smartphones. Use the included 3.5mm TRS to TRRS Output Cable for Smartphones and a TRRS to USB-C adapter such as BH #BOBYK9: https://bhpho.to/3rf0ztz

Q: 10. Does the receiver come with a cold shoe mount for attaching to a dslr?

A: The Synco WAir-G2-A2 PRO 2-Person Wireless Microphone System's clips can slot into a cold shoe for on-camera mounting.