Made for full-sized handguns, this EPS Enclosed Pistol Sight from Holosun features a red, 6 MOA dot reticle and a multicoated, aspheric lens for clear and unobstructed targeting at close and long ranges. Built with 7075 T6 aluminum, the sight is compatible with most factory iron sights and comes with an RMR-to-K footprint adapter for added compatibility. The sight's 6 MOA dot Super LED is powered by a 1620 battery, providing eight daylight brightness levels and four night-vision settings, and delivering 50,000 hours of battery life.

For Full-Sized Handguns    Compatible with Most Factory Iron Sights    Red Super LED 6 MOA Dot Reticle    1x Magnification; Parallax-Free    50,000 Hours of Battery Life

• 1x magnification is ideal for close-quarters engagement
• Unlimited eye relief when using both-eyes-open shooting techniques allows for complete situational awareness
• Aspheric lens and multiple layers of antireflective coating on all optics ensure bright and clear views through the sight window

• 6 aiming dot for close-range shooting
• 8 brightness settings, including four suitable for night vision gear
• Shake Awake technology with last setting recall

• 1.5 MOA adjustment per click impact point correction
• +/- 30 MOA windage and elevation adjustments

• Durable matte black 7075 T6 aluminum housing
• IPX8-rated shock, fog, and waterproof
• Included RMR-to-K footprint adapter plate
• Runs on one included CR1620 battery

Related Questions and Answers

Q: 1. Is that a 1/4 by 20 for a monopod or tripod use?

A: Yes, the Vello CB-800 Universal Pistol Grip with Shutter Release has a 1/4"-20 female threaded socket on the bottom of the grip for a variety of mounting options.

Q: 2. Will the Rode PG2-R work with Sennheiser MKE 600? Also with MZH Windsheild attached

A: Hello Jeff, yes, it appears that the diameter of the MKE 600 will work with the PG2-R with and without the windjammer.

Q: 3. Can a Blimp be placed on top of this? also, will it hold short condenser mics like Audix SCX1-HC?

A: The PG2-R Pistol Grip Shockmount is only a pistol grip. It will not fit inside a blimp. The Audix is only 4.09 long and the pistol grip is 9.4 long. But if you look close you can see the rear mount can be moved forward shortening the distance. So I think you should be able to move the mounts close enough that you can use the Audix.

Q: 4. Can I bring this for underwater photography?

A: If you want the electronic start and stop to work i dont think so. If you just want to use it as a handle then yes

Q: 5. Is this really 50 Watts? Because I see more expensive units, with only 40 Watts.

A: It's pretty loud actually

Q: 6. I am unsing Nikon D5600 and lens 500mm can this grip canbe usefull for heavy lens ?

A: Yes, when attaching the grip to the lens tripod collar, it will definitely provide much better support than without.

Q: 7. Will the remote trigger release work with a Panasonic HC-W580 camcorder?

A: No, the Vello CB-800 Universal Pistol Grip with Shutter Release is not compatible with the Panasonic HC-W580.

Q: 8. Can the top plate with the lyre shock mounts be unscrewed from the pistol grip? And if so, are there any other mounting points below the plate (like a 1/4" thread) that could be used to mount it to a friction arm and placed on a camera?

A: This is intended to be used as one piece. You may be looking for something more like this: https://www.bhphotovideo.com/c/product/1273122-REG/rode_sm4_r_suspension_shockmount.html

Q: 9. Will this fit an AT8035?

A: Hello Willow, you may need to check the dimensions of the AT8035 and compare them to the PG2-R. The PG2-R does work with the Rode NTG2, so you could also compare the dimensions to it.

Q: 10. Will this fit a Boya BM 6060L with a dead cat?

A: Yes