Designed for rifle and carbine applications, this HE403B Micro Sight in a matte black housing from Holosun features a 2 MOA green dot reticle and a multicoated lens for clear and unobstructed targeting at close and long ranges. Built with a 6061 T6 aluminum housing, the sight comes with two mounts, including a 1.63" lower 1/3 co-witness mount and a .75" low mount for low-comb height rifle applications. The sight's green Super LED has 12 brightness levels including two night-vision settings. It is powered by a CR2032 battery for 50,000 hours of battery life.

For Rifles and Carbine Applications    Green Super LED Reticle    2 MOA Dot, 6061 Aluminum Housing    Included Lower 1/3 Co-Witness Mount    1x Magnification; Parallax-Free    50,000-Hour CR2032 Battery Life    12 Brightness Settings

• Unlimited eye relief when using both-eyes-open shooting techniques for complete situational awareness
• 20mm diameter sight window with multiple layers of antireflective coating on all optics to ensure bright and clear views

• 2 MOA aiming dot for closer range targets
• 1.63" dot height with included lower 1/3 co-witness mount
• 12 brightness settings, including two suitable for night vision gear
• Shake Awake technology with last setting recall

• .5 MOA adjustment per click impact point correction
• +/- 50 MOA windage and elevation adjustments
• .75" low mount for low-comb height rifle applications

• Durable 6061 T6 aluminum housing
• IP67 rated (shock, fog, and waterproof)
• Included absolute co-witness QD mount
• Runs up to 50,000 hours on included CR2032 battery

Related Questions and Answers

Q: 1. Hi! I pretend to use this adapter on a g7 Panasonic with the lenses: 10-24 DX, 70-300VR, 50mm 1.8D and 24mm 2.8. Will focus and maximum aperture work perfectly with all those lenses? Is there some restrictions? Will the minimum focus work, as well to infinite? Thanks!

A: Hi, i use the adapter in 2 versions for BMCC and BMPCC with sigma zoom. It works perfectly

Q: 2. will it improve crop factor?

A: The Tilting Lens Mount Adapter for Canon EF Mount Lens to Micro Four Thirds Camera will have no effect on crop factor.

Q: 3. will this mount work on the Blackmagic Pocket?

A: The Tilting Lens Mount Adapter for Canon EF Mount Lens to Micro Four Thirds Camera is compatible with the Blackmagic Design Pocket Cinema Camera. This adapter can be used on any camera with the micro four thirds mount.

Q: 4. Will this adapter allow a vintage Rexatar 135mm 2.8 lens ( M42 pin mount ) to affix to a blackmagic pocket cinema camera?

A: It works great I havent had any problems. A great choice for the price.

Q: 5. how far does the arm extend?

A: Using the included aluminum shafts it can extend 2 , 4 or 6 .

Q: 6. will a canon 50mm f/1.4 fit this adapter?

A: Yes, all Canon EF mount lenses are compatible with the Dot Line Tilting Lens Mount Adapter for Canon EF Mount Lens to Micro Four Thirds Camera.

Q: 7. Will vibration reduction on a lens such as the Nikon AF-S Nikkor 70-200mm f/2.8G ED VR II work with the Metabones MFT adapter and a Panasonic GH2 or GH3?

A: Vibration reduction, as well as any other electronic lens functions including autofocus, will not be retained when using the Metabones Nikon G Lens to Micro Four Thirds Lens Mount Adapter.

Q: 8. so basically the lens turns into a manual apperture, that is cool but:Does the metering in the camera still working ok when adapting a lense?does it has any quality lose while using the adapter?what about when taking still pictures? Does the shutter speed still working properly?

A: The metabones prevents the camera from communicating with the lens.So no, the camera doesn't tell you the aperture reading and will always read as 0. Therefore, you always have to use other means (zebras) to not over expose.You also can't achieve a desired aperture to control DOF (such as 2.8) because, again, the camera can't report the aperture.I haven't taken still pictures so I'm not sure how this affects that mode.

Q: 9. Are all of the screws and sockets on all parts 1/4-20?

A: Yes they are

Q: 10. Does this fit the iPhone 5s? Can I get both this and the Bodelin iPad microscope kit and switch the scope between the two sleeves? Thanks!

A: Yes, it would fully work and fit the iPhone 5S.