Designed to connect to virtually any device, the hi-gloss red Audioengine A2+ Wireless Bluetooth Speaker System provide an analog RCA stereo input, 1/8" input, and Bluetooth connectivity with aptX HD for wireless connectivity with your compatible devices. The speakers consist of a 2.75" woofer and a 0.75" tweeter and output up to 15W per channel RMS, or 30W per channel peak.

For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. The speakers are magnetically shielded, allowing for placement near your TV or other sensitive devices.

30W RMS / 60W Peak Power    Bluetooth 5.0 Wireless Input    2.75" Aramid Fiber Woofers    0.75" Silk-Dome Tweeters    USB, RCA, 1/8" Audio Inputs    Stereo RCA Audio Output    65 Hz to 22 kHz Frequency Response    Integrated CSR8670 DAC    15° Tilt with Stands    Stands Made from Silicone Rubber

The A2+ Wireless speakers can connect to nearly any Bluetooth source, so you can wirelessly play your favorite apps like TIDAL, Spotify, Pandora, and more. The Bluetooth receiver built into the A2+ Wireless features aptX HD coding for enhanced quality with compatible devices. aptX HD is also backward-compatible with the SBC and AAC codecs, so you can enjoy audio from nearly any Bluetooth-enabled device. Further, the A2+ Wireless has a Bluetooth range of up to 100' with virtually no degradation in audio quality.

These speakers feature acoustic and electrical designs to help provide enhanced bass without using digital signal processing or bass boost circuits.

There's no network to set up or passwords to create; simply plug in or pair your source device and enjoy.

The cabinets, drivers, bass port designs, amplifiers, and crossovers are all tuned together to help create an efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

With all the electronics built into the left speaker, it's easy to connect your source device of choice. All the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

The A2+ Wireless speakers use ferrofluid-cooled, silk-dome tweeters with neodymium magnets. The tweeters are engineered to hold up well under high power, and the edge-driven design helps provide smooth response. The aramid-fiber woven-glass composite helps the woofers retain their shape when being driven at high levels.

Both of the A2+ Wireless speakers are magnetically shielded, so you can place them near your display or other sensitive devices.

• Integrated CSR8670 DAC
• Output current limiting, thermal over-temperature, and power on/off transient protection
• RCA and 1/8" inputs provide easy connection to nearly any audio source, including a turntable or TV
• Variable RCA output for subwoofer connection
• 0.75" thick MDF cabinets
• 1/4"-20 threaded brass inserts on the bottom enable attachment to floor stands or wall mounts

Related Questions and Answers

Q: 1. Can I use 2 Bose s1 Pro+ for stereo music playback from laptop headphone out, using Mogami Gold 3.5mm TRS Male to Dual XLR M?

A: Yes, you can use two Bose S1 Pro+ speakers to create a stereo PA system with a 3.5mm to dual XLR cable connected to a laptop headphone out.

Q: 2. What cable ends do I need to connect the two speakers? Will a XLR F and 1/4" TRS work or does it require something else?

A: Yes, an XLRF to 1/4" TRS cable will work to connect the two S1 Pro+ units of the Bose S1 Pro+ Wireless PA System with Bluetooth (Pair). However, this connection will give you a mono output on the second speaker. Instead, it is recommended that you use an XLRF to 1/8" (3.5mm) cable, with the latter connection going into the headphone port to give you a stereo output.

Q: 3. Can these be used on 110-240v power outlets? These are not in stock in my country where there is 220-240v power outlets, so I need to know if they will work with just an adapter, or if I need to get my own power supply? Thanks!

A: These are multivoltage and can be used 100-240v.

Q: 4. how many watts is this beats pill xl?

A: Some brands (Beats included) purposefully don't advertise that. Watts don't really matter, as google/the web will tell you if you want to get into it. I can say I didn't really ever expect to own a Beats product because I think they're mostly overhyped and expensive, but I tried a lot of speakers and none of them could deliver loud, low end without distorting like the Pill XL could. (Specifically, I wanted something that could handle my ubass). I agree with a lot of reviews that the overall sound is bass-heavy, but I still think they sound great for playing an ipod, and they are VERY loud. Battery lasts a long time and can charge devices.

Q: 5. Hello...What model is it? GG serial number or TL serial number? I want the GG model. If you guarantee me that it is a GG model, I will buy it. Thanks

A: The manufacturer part number is JBLFLIP6BLUAM. We are unable to provide any other information including serial numbers prior to purchase.

Q: 6. will this hold an NT-1 with an SM6 shock mount?

A: Yes, you can use the DS1 to hold the NT-1 with the SM6 shock mount, but you might want to use a sandbag or weight to keep it stable or consider a stand with a heavier base like the Auray TT-6220 (B&H # AUTT6220B) or Atlas Sound DS-7E Desk Stand (B&H # ATDS7E).

Q: 7. Can this stand be disassembled for easier travel packing?

A: Yes, this stand should unscrew from it's base for easy fitting into storage.

Q: 8. Will this hold a Shure SM-7B?

A: Hello Alan, it should hold up the 7B without any problems.

Q: 9. Are these compatible with a new 2024 iMac ?

A: Yes, the Harman Kardon SoundSticks 4 Bluetooth Wireless 2.1 Speaker System, B&H #HAHKSNDSTK4W, are compatible with the iMac from 2024.

Q: 10. Does this have an aux input?

A: The JBL Flip 6 Portable Waterproof Bluetooth Speaker (Black), B&H # JBFLIP6BLKAM, does not have an Aux input.