High Lumens Laser Projector

Holosun P.id Dual Positive Identification Device

Product Code: ga134514
Availability: In Stock

$719.97 $878.36

Qty

4 reviews Write a review

Description
Reviews (4)

The P.ID Dual Positive Identification Device from Holosun is a compact pistol-mounted white light with a visible green laser and IR laser for identification of threats in low- or no-light conditions. The P.ID Dual attaches to any firearm with a MIL-STD 1913 Picatinny accessory rail and includes adapters for universal compatibility. The housing is milled from 7075 aluminum and anodized for durability. The P.ID Dual outputs 800 lumens and 17,000 candela in high mode.

White Light with Green Laser & IR Laser Pistol-Mounted/Picatinny Rail Compatible 800 Lumens/17,000 Candela in High Mode Anodized Aluminum Housing

Flashlight
Illumination Source	1x White LED
Lumen Output	White Light: 800 Lumens White Light: 400 Lumens
Laser
Laser Color	Green, IR
Peak Wavelength	Not Specified by Manufacturer
Peak Output	Not Specified by Manufacturer
Environmental
Impact Resistance	Not Specified by Manufacturer
Environmental Resistance	Dust/Water-Resistant (IP68)
General
Mounting	Picatinny
Battery	1x 18350 Lithium-Ion (Flashlight, IR Illuminator, Laser) • White Light: Up to 60-Minute Runtime at 400 Lumens
Material	Aluminum
Dimensions	3.6 x 1.4 x 1.2" / 9.1 x 3.6 x 3 cm
Weight	5.1 oz / 145.0 g

Related Questions and Answers

Q: 1. Does this take classic arca swiss plates? WHat is the load capacity of the clamp?

A: No it will not take the classic series plates. I believe it is rated for 75 lbs

Q: 2. Will it fit Peak Design PROplate?https://a href= http://www.bhphotovideo.com/c/product/1096749-REG/peak_design_pl_pp_1_proplate_a_for_manfrotto.html target= _blank www.bhphotovideo.com/c/product/1096749-REG/peak_design_pl_pp_1_proplate_a_for_manfrotto.html/a

A: Yes the Peak Design PROplate is Arca-swiss compatible with this clamp, as well as Manfrotto RC2 compatible.

Q: 3. Hi,I already own an Arca swiss Monoball p0 and I have adapted a different quick release system to it. I'm thinking about switching back to the arca swiss plate system. I bought some L-brackets from Sunwayfoto to fit my Sony A7R3 cameras (which are compatible with Arca-Swiss stardard). Is the MonoballFix on the Monoball p0, able to mounts these L-bracket? Or is it a smaller mount on the MonoballFix ?Also, can the tension be ajusted other than the release-lever?Lastly, are the stop-pins fixed or able to be actuated by spring pressure?

A: Its a smaller/narrower mount and incomprehensible with the standard Arca-Swiss system

Q: 4. Can you please tell me the circumference of the metal silver pole?

A: This is not a published specification, but I would estimate between 1 and 1.5 .You may contact the manufacturer as well for more details:Pyle Pro:Tel: 800-444-5671 Email support@pyleaudio.com

Q: 5. Can this hold on iPad mini?

A: Yes it can, an iPad Mini is about 5.3 inches wide. This Mobile Device Holder can handle a Smart Phone or Tablet up to 6.7 inches wide, which means you'd even be able to mount an iPad Air 2 in this unit.

Q: 6. Does this work with an iphone 5, the power buttion is on the top, does the clamp push the power button?

A: Hello. You should be able to position the phone so that the power is not activated. Thanks.

Q: 7. Will this work with the Ronin (versus the Ronin M)?

A: This unit is designed specifically for the Ronin-M, it will not work with the Ronin. However the Ronin has a 1/4 -20 accessory thread on it, so you could use a product like the Big Balance GA1 Smartphone and Tablet Holder to connect a Smart Device to the Ronin. It comes with a standard 1/4 -20 screw for connecting to tripods and gimbals.

Q: 8. How does this attach to the camera?

A: This strap connects to the eyelets on your camera.

Q: 9. What does the audio input look like over USB? How many channels are there as inputs when using all HDMI and analog inputs?

A: There are 2 channels in and a single audio out on the AVMATRIX Dual HDMI to USB-C 3.1 Video Capture Device.

Q: 10. what is the maximum weight that this dual stand can hold?

A: about 25lbs per shelf... based on my experience

Mike	21/09/2024
It is actually cut to fit into 4x5 film holders, slips right in, so they have thought to make it the size of 4x5 sheet film. A bit tricky to get out without a decent fingernail but no real problem. It is curled from side to side (short dimension) so being able to load it under dim red safelight is a plus. It is a bit tricky to get both corners started under the retainer strips. The ISO stated for it of about 3 to 6 appears to be right on. Develops right up in Dektol, I used 1 part in 2 parts water. Exposure needs to be done carefully as it does not have the latitude of film. Also it is hard as nails. Grade 4 is perhaps hedging a bit. Seems more like Grade 5. Pre-flash works very well and opens up the shadows a good stop without changing much else if done just right. Worth figuring out. Sharpness and detail shot in camera is surprisingly good. 5

Patrick	28/07/2024
This paper is beautiful, the tone is perfect. I use it in my Ilford pinhole. The only problem, you have to wash it 60min and its curly when it dry. Put it under some books and all will be ok.... 5

anyonymous	06/07/2024
I used this with an 8x10 camera instead of using film. It was awesome - it was easier to load than film because it could be done with a safe light on, and it could be developed under safe light as well. The only downfall is that it isn't a negative - the image you get is the image you get - but it can still be scanned in and manipulated and printed, so all in all it's at least fun to play with. 5