The 5.9 RD Column Mot from Kaiser is made from sturdy black anodized aluminum and can support up to 17.6 lb. The camera mount can be horizontally adjusted over approximately 9.8" with rack-and-pinion parallel guides. A cable remote control maintains constant speed regardless of weight-load when adjusting height.

Motorized Operation    Horizontal Adjustment    Left Hand or Right Hand Operation    Camera Plate Tilts +/- 90°    Durable Aluminum Construction    Load Capacity: 17.6 lb

• Left hand or right hand operation
• Two blocking screws maintain selected position
• +/- 90° Tiltable camera mounting plate

Related Questions and Answers

Q: 1. Hi, is the current photo incorrect? Will I be receiving an unbleached muslin and not whatever is shown in the photo?

A: The photo for the Matthews Butterfly/Overhead Fabric - 8x8' - Unbleached Muslin is for general shape. You will if you order that one get the Unbleached one.

Q: 2. Is the mounting rail same as Lightstream?

A: No, the mounting rail for the LightBridge Diffusion #4 C-Reflector (Super White , 9.8 x 9.8") is not the same as for Lightstream.

Q: 3. would this fit a godox vl 200 light with plenty of room to put the umbrella step freely?

A: You could use this with a VL series light.

Q: 4. Used without an umbrella attached would this be good to spread light for group shots?

A: If you want to spread the light widely with out a umbrella then just use a barebulb no reflector.

Q: 5. Does the Matthews Rags come with a bag?

A: Unfortunately, this product does not include a bag.

Q: 6. Will this fit in the Kaiser 205615 table? https://www.bhphotovideo.com/c/product/248571-REG/Kaiser_205615_Table_Frame_for_the.ht

A: No, the Kaiser Calibrated Counterbalanced Column for Copy Stands (59.1") does not fit onto the Kaiser Table Frame BH #KAFSMRSP • MFR #205615.

Q: 7. What is the difference between this and the "Kit" version? Does this have a glass on the top of the unit?

A: The Kaiser FilmCopy Vario Kit includes two higher quality Kaiser Glassless 35mm Masks and a Kaiser Negative Mask for 5x5 cm Slides that are not included with the Kaiser FilmCopy Vario.

Q: 8. What are the thumbwheels in the front of the unit for?

A: The thumbwheels on the Kaiser FilmCopy Vario are used to push and pull vertical cropping bars.

Q: 9. Does the 35mm film holder show the full image (to black edges) or does it crop it to the edges of the image?

A: The Kaiser FilmCopy Vario has adjustable stop pins to control the frame for film strips.

Q: 10. Can you mount a copy stand column and lights to this table? What column and lights are compatible with the table? Thanks

A: This table is intended for use with the Kaiser RSP Xtra Copy Stand B&H # KAHDECSMCA. The copy stand can then be used a set of lights such as the Kaiser RB 300 Copy Light Set with Two 300 Watt Quartz Halogen Lamps B&H # KACLRB300. Please see the images below for reference.