Switch up to three DCI 4K HDMI sources onto one 4K display with this 3-Port True DCI/UHD 4K HDMI Switch from IOGEAR. The plug-and-play switch features three HDMI 2.0 inputs and one HDMI 2.0 output and supports up to True DCI 4K resolution 4096 x 2160p60 with HDR and 3D pass-through. Other features include DSD, DTS-HD, Dolby True HD, HBR (high-bit rate) audio pass-through, and HDCP 2.2 support.

The switch supports data rates up to 18 Gb/s with no latency and automatic switching and resolution adjustment with EDID support. You can switch between sources via front-panel push-buttons or the included remote control, while LED indicators on the front panel confirm your selections. The switch is powered using the included micro-USB cable and a separately available power adapter.

3 x Input & 1 x Output HDMI 2.0 Switcher    Supports up to DCI 4K 4:4:4 Video    Supports HDR & 3D Video    DSD, Dolby, HBR Audio Support    Front-Panel Buttons or IR Remote Control    18 Gb/s Bandwidth, No Latency    HDCP 2.2 Compliant

Connect and switch between three HDMI sources on one HDMI display

True 4K resolution support up to DCI 4K: 4096 x 2160p60 4:4:4

Configures video resolution automatically according to the maximum output of each monitor with the capability to output 4K resolution to one monitor while output 1080p to another monitor (EDID function)

High bandwidth of up to 18 Gb/s with no latency

HDMI 2.0 and HDCP 2.2 Compliant

Supports HDR and full 3D pass-through

Flexible control via push-button, IR remote control

Compatible with Standard audio, DSD (Direct Stream Digital) and HBR audio (High Bit Rate) such as Dolby True HD and DTS-HD

Supports high-speed data rates up to 18 Gb/s with no latency

Low power consumption, metal housing, plug-and-play design

Related Questions and Answers

Q: 1. Is this card compatible with Wirecast?

A: Yes, the AVMATRIX VC12-4K UHD 4K HDMI PCIe Capture Card is compatible with Wirecast.

Q: 2. Does this support CEC?

A: HDfury Pro 1x2 UHD 4K HDMI Splitter does not support CEC.

Q: 3. I want to use a portkeys bm5 and an atem mini pro with my bmpcc 6k. both need HDMI capabilities, will this splitter allow me to accomplish what I need?

A: In theory yes this should work. This takes a single HDMI input and splits it out to two. However you are not going to be able to control the Pocket 6K from the ATEM Switcher like you would with a direct connection.

Q: 4. I am trying to show my design program on my TV. I have about a 8' HDMI wire to do so but it is very unprofessional and off looking. Will this solve that problem honestly because they told me at office depot it would with chrome cast but it didn't. It only supported certain apps, but i need something EXACTLY like the HDMI cord that plugs into my computer and into the TV but wireless. PLEASE HELP I AM DESPRETE?

A: Thia would be an ideal device for use with your proposed application.

Q: 5. Are there videos and reviews from the Desview brand of large monitors? I do not see opinions on these monitors. How long is the warranty and what coverage?

A: At this time we do not have an reviews on our website for this monitor however we can confirm that it comes with a Limited 1-Year Manufactures warranty that covers defects.

Q: 6. Is it possible to manual focus through a visca software?

A: You could control the camera using the following option from Aida. AIDA Imaging VISCA USB 3.1 Gen 1 Camera Control Unit & Software BH #AICCSUSB • MFR #CCS-USB - https://bhpho.to/3ImAUpz

Q: 7. From one of the answers, it sounds as though the hub will work without the AC. Is this true?

A: You should be able to use the IOGEAR met(AL) USB 3.0 4-Port Hub with Power Adapter without its power supply. But that's going to depend on the devices you're planning to connect. If you're connecting multiple external hard drives, I recommend to use the hub with its power supply.

Q: 8. If I plug this into a USB 2.0 port on laptop, will it safely provide full required power to a USB 3.0 device using the AC adapter, while still allowing the device to communicate/sync/etc (at USB 2.0 speed) with the laptop?

A: I have used the IOGEAR hub connected to my early Mac Air laptop that has two USB 2.0 ports. IOGEAR hub was powered by its provided AC adapter. Laptop was not plugged into AC power. Then I connected a Kingston USB 3.0 hi-speed media reader to the the IOGEAR hub. Finally into the Kinston media reader I inserted a CF card from my Canon. Images transferred without any problem. Hope this helps.

Q: 9. Yes, I've checked the version before posting the question. Yes, Mac OS it is listed as supported. Any ideas?

A: The IOGEAR Mini Wireless 4K UHD Screen Sharing Receiver BH #IOGWAVR4K may be defective. Please email our customer service department for assistance. cs@bhphoto.com

Q: 10. Is there a mirror flip option for using in a teleprompter?

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have a mirror flip option at this time.