Keep a set of six lenses protected during transport and storage in this 21L, black Nanuk 918 Hard Case. This IP67-rated case has a built-in purge valve, a robust top handle, and an O-ring sealed beveled lid. It keeps your contents protected against dirt, dust, impact, and moisture. The foam insert accommodates various lense sizes including 8-15mm, 24-70mm, 24-105mm, 17-40mm, 17-55mm, and 100mm. The precut, low-abrasion, closed-cell foam holds your lenses either mount up or down based on your preference. Each slot has two removable foam discs to custom fit long or short lenses and finger notches to help you safely and easily insert and remove your lenses.

Carry the 918 case with the comfortable, oversized top handle. For added security, the case accepts user-supplied padlocks. Other design features include handle and lid stays, solid and reliable PowerClaw latches, and durable stainless steel hardware. The case is made from lightweight but tough NK-7 resin and has a 40 lb maximum buoyancy. Designed to be stackable, the IP67-rated dust and waterproof case has a purge valve to ensure it remains easy to open, even after changes in air pressure.

In honor of B&H's 50th anniversary, Nanuk presents this limited edition run, specially designed to celebrate five decades of creative partnership. This exclusive Special 50th Anniversary Edition embodies the commitment to excellence that B&H stands for. Get your hands on a piece of history with this distinctive edition.

Official B&H 50th Anniversary Edition    2 PowerClaw Latches    IP67-Rated, Dust and Water Resistant    Precut, Low-Abrasion, Closed-Cell Foam    Impact-Resistant NK-7 Resin Construction    Stackable Design, Built-In Purge Valve    Accepts User-Supplied Padlocks    Beveled Lid with Waterproof O-Ring Seal    Handle and Lid Stays

• Upper Hole Diameter: 4"
• Upper Hole Depth: 2"
• Lower Removable Plugs Diameter: 3.125"
• Lower Removable Plugs Depth: 4" (one 1.5" layer and one 2.5" layer)

Related Questions and Answers

Q: 1. Will this fit the Sony 28-135 F4 G please?

A: While the case can accommodate the 28-135 F G, the insert will not. You'll have to enlarge the lens cut out for the 28-135 F G to fit.

Q: 2. Can this fir the Sirui Night Walker cine lenses?

A: Yes, the Nanuk 918 Hard Case with Foam Insert for Six Lenses (Black, 20.L) will fit the Sirui Night Walker Cine Lens series. The lens dimensions are 79mm wide, and 85.4mm tall. The lenses inserts on the pre cut foam that comes with the case are 103mm wide by 113mm long.

Q: 3. What is the diameter of each hole?

A: Each hole is roughly 4 inches in diameter and they taper down to about 3 inches. If you have some lenses that are larger the 4 inches I would recommend either the foam insert version https://bhpho.to/3eztYYT or the divider version: https://bhpho.to/36Rfyil The Divider version is more adaptable in case you change which lenses or other accessories you might be carrying.

Q: 4. will this fit Canon Sumire lenses?

A: The Nanuk 918 6-Lens Case with Foam Insert (Silver) can be considered for use with the Canon Sumire Primes. The lens cut-out diameter in the Nanuk 918 6-Lens Case with Foam Insert (Silver) is about 116 mm. The exterior diameter of the Canon Sumire Primes is about 115mm.

Q: 5. Is this case going to accommodate DZO Arles lenses?

A: The Nanuk 918 Hard Case with Foam Insert for Six Lenses (Yellow, 21L) would not be a good choice for the DZOFilm Arles lenses. The DZOFilm Hard Case for Arles 5-Lens Set, BH #DZOCASEAP5, would be recommended to use with the Arles series of lenses.

Q: 6. Tallest lens it will accommodate?

A: This case can accommodate a lens that is up to 8.5 inches tall.

Q: 7. How deep is the 4" section of the hole? Is the lower section exactly 3"? Would a 3.15" lens be able to squeeze in?

A: The pre-cut foam dimensions included with Nanuk 918 6-Lens Case are 6.5 x 9 x 10.5 inches. each lens cavity has 2 removable foam disc to fit long or short lenses. The first session is 2 inches deep. the first foam disc is 1.5'' tall and the second disk towards the bottom of the insert is 2.5 inchees tall. If you remove all foam disk the insert would reach a 6 inche depth. The width of the insert on the top section is 4 inchess, the botton sections is only 3 inches. I wouldnt't recommend this inserts if your lens circumference is winder then the insert because of the pressure you'll be putting on your lenses.

Q: 8. Can I fit 6 DZO Vespid PL mount lenses in the 6-lens Foam Insert?

A: The DZOFilm VESPID 6-Lens Kit A (PL & EF Mounts), B&H # DZVKAPLM, would be too large for the foam inserts. The alternative would be the DZOFilm 4-Lens Hard Case for VESPID Primes (B&H # DZOCASEV4). https://bhpho.to/3zLO0aL

Q: 9. Does this case fit for the Samyang VDSLR mark II (14mm, 24mm, 35mm, 50mm & 85mm)??

A: The pre-cut holes will not fit the Samyang lenses so I would recommend this case with dividers: B&H # NA9182001 MFR # 918-2001 https://bhpho.to/3aJ0h5Q

Q: 10. Would Zeiss CP.3 lenses fit in here?

A: Yes. While they may be slightly snug, the ZEISS Compact Prime CP.3 Lenses should fit inside the Nanuk 918 6-Lens Case with Foam Insert.