The SeaSonic Electronics MagFlow 1225 PWM 120mm 1-Fan Kit packs both convenience for new PC users and performance for seasoned builders. Its daisy chain design allows you to snap fans together with ease, eliminating the hassle of excessive cable management, especially when mounting fans to a radiator.

The MagFlow fan is equipped with Fluid Dynamic Bearings which increase the life span of the fan while enabling speeds from 600 to 2000 rpm. Noise level reaches a maximum 33.78 dBA while promoting an airflow up to 63.33 CFM and 2.61mm H20 maximum air pressure.

Fluid Dynamic Bearings    600 to 2000 rpm    33.78 dBA Maximum Noise Level    Radiator Compatible    Modular Locking Design

Related Questions and Answers

Q: 1. Hi everybody My Camera is Sony A7R iv and My Lens is Sony 12-24 mm Which Dome and House is mach for my setup

A: Yes, the Outex Underwater Camera Cover Kit (Small, 120mm Dome Port for 82mm Lens) would be compatible for use with both the Sony Alpha a7R IV Mirrorless Digital Camera and the Sony FE 12-24mm f/2.8 GM Lens.

Q: 2. Will this fit on a Canon R5 with an RF15-35mm lens (82mm)?

A: Yes, the Outex Underwater Camera Cover Kit (Small, 120mm Dome Port for 82mm Lens) is compatible with the Canon R5 and the RF 15-35mm lens.

Q: 3. I have a Sony A7r4 and want to use a Sigma 14-24 and my Sony 24-70. Would this work? What do I need to switch from dome to front glass?

A: Yes, the Outex Underwater Camera Cover Kit (Small, 120mm Dome Port for 82mm Lens) would be compatible for use with the Sony Alpha a7R IV Mirrorless Digital Camera along with the Sigma 14-24mm f/2.8 DG DN Art Lens for Sony E and the Sony FE 24-70mm f/2.8 GM Lens. If you are looking for the front glass for use with the 82mm filter threads on the Sony FE 24-70mm f/2.8 GM Lens, the Outex Front Glass for Underwater Camera Cover (82mm Filter Thread), B&H # OU82MM, would be the correct option for your usage needs.

Q: 4. can it be used with the 645Z body?

A: Yes, this lens will work on the 645z body

Q: 5. Will this work with a Manfrotto MV500AH Video head? I want to screw this one to the included Manfrotto PLONG plate, so that I can have an Arca Clamp to attach my cameras. Please advise

A: If you're screwing this into a PLONG plate, it will work. If you want an integrated 501-style with an arca-clamp, try this ProMediaGear plates: https://bhpho.to/3ryJpFM (501-short) https://bhpho.to/3BDT5U5 (501-long)

Q: 6. Is this compatible with the Really Right Stuff ball head and L bracket for the Canon 5D Mark III?

A: I can't say for sure about RRS head, but would guess it is compatible. It works fine with my three Sirui heads and RRS clamps and canon 5d Mark 11 RRS L bracket. I can attest that is beautifully made and a bargain.

Q: 7. Does this Sky-Watcher StarTravel 120mm f/5 AZ Refractor scope need a bag for storage and transport?

A: Its a personal choice. If you plan to transport to events and set up and take down. I would strongly suggest some type of telescope travel bag.

Q: 8. Hi. I have an older 400mm 2.8 autofocus lens. Will the screw drive focus it when the camera is in electronic/silent shutter mode?

A: Please write us with the exact name of the lens and camera to prophoto@bhphoto.com.

Q: 9. I use arca swiss plates sideways for my camera and I am planning to get a head with a native Arca Swiss mount, but it is forward facing instead of sideways. Will this item be a solution to my problem?

A: The DNR-120 should do what you want it to do, and also allow you to balance the weight of the camera and lens on the tripod.It's extremely well made, and does exactly what I wanted it to do.

Q: 10. Under the Nodal Rail, there are two 1/4-20 Threaded holes. Can someone measure me the distance from center to center of these holes?

A: The distance from the threading under the spirit level to the threading in middle of the clamp on the Desmond DNR-120 Nodal Rail (120mm) is approximately 80mm.