Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.

The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.

Portable PA for Live Sound Applications    2-Channel Mixer with Gain Controls    Combo XLR-1/4" Inputs + 3.5mm Aux Input    Four Application Specific Voicing Modes    600D Polyester Fabric Bag    Protects Speaker from Wear and Tear    Speaker Stand and Carrying Bag    Lightweight Aluminum Construction    Neutrik XX Silver Connector Cables    Reusable Straps for Cable Organization

• 1400W ultraefficient Class-D amplifier
• Built-Like-A-Tank to conquer every gig while lightweight for easy loading
• Frequency response: 40 Hz to 20 kHz
• Max SPL: 129 dB
• 15” high-performance woofer
• 1” compression driver
• Outdoor mode optimizes voicing for open air venues
• Built-in Feedback Eliminator reduces squeals and out of control rumble
• Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
• Front LED On/Off switch
• Standard pole mount
• M10 flypoints for permanent install
• Monitor wedge provides optimal angle for use as a floor monitor
• Universal power supply

Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.

• Music: Made to enhance pre-recorded music
• Live: Great for general sound reinforcement
• Club: Provides a low-end punch
• Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check

Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.

Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.

• Bluetooth connectivity for streaming, speaker linking, and control
• Download the Thump Connect 2 app for complete wireless control
• Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration

• Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
• Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
• Thru output contains audio from both input channels

These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.

You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.

Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.

Related Questions and Answers

Q: 1. Can I use the wireless mic and play music via Bluetooth at the same time?

A: Yes. Using the wireless microphone and playing music via bluetooth simultaneously is possible.

Q: 2. What is the range(receiving distance) on the microphones? Basically, how far can you walk away from the receiver?

A: The wireless handheld microphones included with the Pyle Pro PPHP1599WU 15" 1600W Bluetooth 4.0 Loudspeaker System have an operating distance of up to 164 feet line of sight.

Q: 3. Is the rechargeable battery replaceable after it stops charging?

A: Yes. You can contact Pyle Pro directly to purchase a replacement battery for the PPHP1599WU Loudspeaker System.

Q: 4. Once the microphones break, can you buy other wireless microphones that will work with the speaker?

A: Unfortunately Pyle does not offer the standalone mic transmitter for the PPHP1599WU PA system standalone through B&H. So you would need to use an external wireless mic system for that compatibility like the VocoPro Digital-32 or the Pyle Pro PDWM2880B as a replacement.

Q: 5. Can I connect wireless mics to this?

A: It does not have a wireless receiver built into it. You would need to connect your own receiver to it.

Q: 6. can you connect to two of these at the same time?

A: Yes. To do so; You would go from the Mix Out stereo outputs on one Pyle speaker, to the Line In stereo inputs on your 2nd Pyle speaker, using this Kopul RCA cable (B&H # KOSRC4015). https://www.bhphotovideo.com/c/product/1022848-REG/kopul_src_4015_stereo_rca_cable_15.html

Q: 7. Can you use this system to a TV if it has bluetooth?

A: The Mackie SRM-FLEX Portable 1300W Column PA System is able to accept a wireless signal from a Bluetooth transmit source. In theory this could work with a TV that is capable of Bluetooth output.

Q: 8. Can you link two of these together with the appropriate link cable?

A: You could run the RCA mix output from the first speaker to the RCA Line Input on the second. That will send all audio from speaker 1 to speaker 2. Please note, you can only use the wireless mics from the first speaker set though, as turning on the second speakers mics would cancel out the first set.

Q: 9. Does the Samson's amplifier provide 100 watts of PEAK power or RMS power?

A: The Samson Expedition XP106w is 100W peak.

Q: 10. can you pair two of these speakers?

A: You can connect one to another using an XLR cable. These systems do not have built in wireless to connect on to the other.