The Ocean Way Audio HR3.5 is a single three-way reference speaker and external amplifier system designed to deliver highly accurate studio monitoring for musicians, engineers, and producers at levels up to 120 dB SPL. Based on the highly acclaimed HR4S, the cabinet houses an integrated dual-horn system featuring a 500W 1" HF driver and a 500W 8" MF driver. These are mechanically time aligned with dual 12" LF drivers, serving up a total of 2400W of solid bottom end. Crafted from CNC composite, Ocean Way's geometrically sophisticated waveguide system delivers accurate and detailed imaging across the entire 20 Hz to 20 kHz range. The speaker offers a 100 x 40° horizontal and vertical dispersion with a large sweet spot spanning a wide section of the listening environment.

With a 120 dB peak level, the HR3.5 offers plenty of power for loud mixing sessions and accepts both analog and digital inputs, supporting resolutions up to 24-bit / 96 kHz. The external A-4100 amplifier can be rackmounted, while the speaker can be soffit mounted or used in freestanding mode.

Large, Accurate Studio Reference Monitor    A-4100 Tri-Amp with 15' Cables    500W 1" HF Driver, 500W 8" MF Driver    2400W Twin 12" LF Drivers    Dual / Hybrid Waveguide System    100 x 40° Dispersion, Wide Sweet Spot    20 Hz to 22 kHz Frequency Response    Maximum Peak SPL of 120 dB    Rackmount or Soffit Mount Amp    Analog and Digital Inputs

• High-resolution tri-amped studio monitor speaker
• Proprietary integrated dual/hybrid waveguide system
• Integrated two-way dual-horn system 
• 1” HF driver and 8” LF driver mechanically time-aligned with twin 12” sub-bass drivers per channel
• 3400 watts/channel of pure power via supplied A-4100 remote amplifier; 15' cables included
• Ultrawide sweet spot, rich detailed controlled 100 H / 40 V degree dispersion
• 20 Hz to 20 kHz frequency response
• Digital and analog inputs, accepting 24-bit / 96 kHz data streams
• Capable of delivering 120 dB SPL with incredibly solid bass and center imaging performance
• Can be set up as a freestanding monitor or soffit mounted

Related Questions and Answers

Q: 1. Can the wireless handheld mic accept a cord? If so, do you sell a compatible cord?

A: No, the Galaxy Audio TVHH Wireless Handheld Cardioid Dynamic Microphone is not able to be adapted with a cable for a hardwired connection to the Galaxy Audio TV8 Traveler 8" 120W 2-Way Rechargeable PA System. The system has a standard 3-Pin XLR microphone input for use with similar wired microphones such as the Shure SM58-CN Vocal Microphone with Cable (BH #SHSM58CN).

Q: 2. Does the RTA mic come with a case?

A: Yes

Q: 3. Can this be used for an NEC EA232 monitor? How about an NEC PA302? Not sure how it would connect.

A: The Dell MSA20 Single Monitor Arm BH #DEMSA20 works with monitors 19" to 38"and up to 22 lbs. The VESA Mounting Pattern must be 100mm x 100mm. The NEC EA232WMI-BK 23" Eco-Friendly Widescreen Desktop Monitor with IPS Panel BH #NE232WMIBK • MFR #EA232WMI-BK would also be compatible. The NEC 30" Widescreen LED Backlit LCD Wide Gamut Desktop Monitor B&H # NEPA302WBK MFR # PA302W-BK at 30" is too large and would not be compatible.

Q: 4. How do you calibrate this monitor?

A: You will need to purchase a Cr100 or a Calman colorimeter and download the Color calibration software from the TVLogic website. For now the TVLogic software is only available for Windows computers but they plan to add a MacOS version soon.

Q: 5. can it operate while charging?

A: Yes, the Wi Digital AudioLink Pro Pocket Portable Wireless Instrument and Audio Monitoring System can operate while the components are charging.

Q: 6. What's a good soft case or hard case for the new Sony MDR-MV1 headphones?

A: The Sony MDR-MV1 Reference Monitor Headphones can be used with a case like the SLAPPA HardBody Pro Full-Sized Headphone Case (B&H # SLHP99), the Magma Bags MGA41460 Headphone Case (B&H # MAMGA41460), or the Dekoni Audio Headphone Savior V2 Universal Carrying Case (B&H # DEHPSAVCHV2).

Q: 7. Can the camera with a 200-600mm lens be locked in the horizontal position with the lens facing backward?

A: Yes, the ProMediaGear Single Camera Holster System (Black) can lock in a camera with the Sony FE 200-600mm f/5.6-6.3 G OSS Lens attached. You will be using the tripod foot on the lens, and the lens could face backwards.

Q: 8. How do you attach the projector?

A: This bracket is designed to clamp onto an I-beam in the ceiling above the ceiling tiles. You attach a pole to it (click the accessories tab to see the various ones) and then connect an adapter bracket (ex. PEPRGUNV) to the pole. The pole will extend down through the ceiling tiles to hold the projector mount (assuming your projector is designed to be mounted. Alternately you could possibly use a equipment mount (ex. for DVD/VCR/etc...) that adapts to the pole. I used these brackets to hang 65-inch TVs from I-beams up in the ceiling and they are very steady.

Q: 9. Would the arm be compatible with the HP Omen27i monitor? Not sure if this arm can also rotate forty-five degrees.

A: The Dell MSA20 Single Monitor Arm BH #DEMSA20 features a 100 x 100mm VESA Mount and will support up to 22 lbs. It will tilt from -35° to 80° and swivels & rotates 180°. The HP OMEN 27i can be VESA mounted (100mm X 100mm only).

Q: 10. cuantos sistemas pueden funcionar al mismo tiempo ?

A: Se pueden usar hasta tres sistemas Wi Digital al mismo tiempo.