The Comica Audio CVM-WM200/300II HTX is a wireless cardioid handheld microphone and transmitter unit compatible with CVM-WM200II, CVM-WM200 PRO, or CVM-WM300II wireless systems. Add a professional handheld microphone look to your next mobile journalism interview or social media livestream. The transmitter has dual 96 auto-scan channels and 534 to 589 MHz UHF wireless frequency range. It syncs to other compatible units via IR signal from up to 393.7' away.

A built-in LCD display allows for intuitive operation of the onboard controls. Toggle the 160 Hz low-cut filter, mute, and high or low RF signal strength. Power the unit using two AA batteries.

For CVM-WM200/300II & WM200 PRO Systems    Cardioid Pickup Pattern    LCD Screen, IR Sensor    High and Low RF Signal Modes    Low-Cut Filter, Mute Button    Runs via 2 x AA Batteries

• 534 to 589 MHz wireless frequency
• Compatible with CVM-WM200II, CVM-WM200 PRO, and CVM-WM300II systems
• High or low RF power modes
• 393.7' operating distance
• PCB antenna, IR signal
• 160 Hz low-cut filter
• Cardioid pickup pattern
• 96 channels
• Powered via 2 x AA batteries

Related Questions and Answers

Q: 1. Can I use more than 1 hand held mic at a time, and if so, how many?

A: This Comica Audio CVM-WM100 PLUS-HTX Wireless Cardioid Handheld Transmitter (568 to 591 MHz) is intended for use with the the CVM-WM100 PLUS Wireless Receiver like the one included with the Comica Audio CVM-WM100 PLUS 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (B&H # COMWM100PLUS). We do not have the receiver available separately, but you can use two transmitters with the receiver in the CVM-WM100 PLUS System which can either be the wireless bodypack transmitters that are included with the system or the handheld CVM-WM100 PLUS HTX, or a combination of both.

Q: 2. This wireless mic system can be used with any computer and a mic input line right? Will there be any interference with the wireless radio in this system and wireless frequencies of a laptop?

A: Yes, The receiver output may be connected to a microphone input connector of any device, including computers (better still would be to connect this to an audio interface, USB out of the audio interface, out to computer) or, to a camera microphone input.

Q: 3. Does this microphone turn on automatically when the camera turns on or do you have to turn it on manually?

A: The Comica Audio CVM-VM20 Camera-Mount Shotgun Microphone will need to be switched on manually.

Q: 4. If I buy two kits with handheld microphones and connect both microphones to a single receiver with the same frequency (both microphones and the receiver), will it work? Will the audio from both microphones be picked up by the same receiver?

A: No, it will not work. You may want to consider the Samson Go Mic Mobile, which does have a two channel receiver, and the system comes with two mics and all accessories, with the exception of the Apple adapter, if you intend to use with an iPhone. https://www.bhphotovideo.com/c/product/1374611-REG/samson_go_mic_mobile_dual.html

Q: 5. Could I connect 2 of these (in the same frequency bank) to the Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver?

A: Yes, dual Sony UTX-M40 Wireless Handheld Cardioid Microphone Transmitters can be used with the Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver simultaneously if all components are on the same frequency band.

Q: 6. Can I purchase multiple bluetooth mics to use for this if they're on the same channel?

A: No. You can only use one (included) microphone transmitter with the included receiver. To receive from two microphones you would need two seperate receivers. The frequency used by this Comic WS50H is not Bluetooth, it is between 520 and 526 mhz.

Q: 7. How long does it run on battery power? My battery runs out very quickly, after 1-2 hours((

A: https://www.bhphotovideo.com/c/product/1460331-REG/comica_audio_cvm_ax3_dual_channel_xlr_audio_mixer.html/specs Comica Audio CVM-AX3 Specs Battery Life Phantom Power Off: Up to 40 Hours Phantom Power On: Up to 6 Hours

Q: 8. I have a zoom h4n... how can I connect the R and L separated channels from the reciever to each XLR plug (R and L respectively) of my Zoom recorder?

A: You can use the Saramonic SR-UM10-CC https://www.bhphotovideo.com/c/product/1443723-REG/saramonic_sr_um10_cc1_locking_3_5mm_male_to.html

Q: 9. Is there a low battery power indicator?

A: No, there is not a battery power indicator.

Q: 10. How to use saramonic uwmic9 for video recording from Android mobile

A: If your Android device has a USB-C connection, you could use this adapter along with the UWMIC9, BH #SAUTCC35.