Mount a 15mm or 3/8"-16 accessory onto a Mini Accessory Rail using this Bolt-On Accessory Rail Clamp from Wooden Camera. This compact, cube-shaped mount features 15mm rod ports on the sides, a 3/8"-16 anti-twist thread on top, and a rail clamp on the bottom. The rail clamp mounts onto separately available Mini Accessory Rails that allow you to mount accessories onto your rig using Wooden Camera Accessory Plates. The clamp is constructed with durable anodized aluminum.

Universal 15mm LWS Rod Clamp    Accessory Hinge and Bolt-On Rail Clamp    Mini Accessory Rail Kit (100/60/40mm)    Accessory Plate Kit (4 Plate Sizes)    Hook-and-Loop Plate Kit (4 Plate Sizes)    1.1" Offset Bracket with 3/8"-16 Threads    Durable Aluminum Construction

• Engineered for use with any 3/8"-16 screw mount and moveable locating pins
• Use a standard 15mm rod to mount your accessories 
• A new rail clamp tightens with a thumbscrew
• A lightweight design adds the least amount of weight to your rig
• Sleek and unobtrusive design featuring a black anodized aluminum finish

Related Questions and Answers

Q: 1. Will this top plate still allow use of the standard Burano top handle?

A: Yes, The Wooden Camera Top Plate for Sony BURANO would allow you to use the SONY Burano handle. There is a cutout in the top plate that when removed will offer space for the Sony Handle to mount.

Q: 2. Can the EVF be rotated to be facing the camera operator directly without the use of the eyepiece for camera control?

A: Wooden Camera Elite Accessory System for Sony BURANO does offer alternate mounting solutions without having to use the eyepiece. Please review this link to see the alternate mounting options: https://bit.ly/49Phs2j

Q: 3. Will this also work on a Sony FX9?

A: It will not. Instead you would want BH #WO275100 which is the top plate specifically for the FX9. https://bhpho.to/35VODCd

Q: 4. Is there a way to seal the serial port that's on top of the camera? For the Zoom and Record button control? I'm worried about possible water or dust getting in there if i were to use this.

A: My FS7II came with a cover plate that was held in place by 2 small screws. I had to remove this cover before I could install the the stock handle (with zoom/record controls and the 15mm rod for attaching the viewfinder and mic holder), so putting the plate back should keep out the dust.

Q: 5. Will this work with the C300 Mark II?

A: Yes, the Wooden Camera Top Plate for C100, C300, C500 will also work on the C300 Mark II.

Q: 6. Is there a 15mm rail mount that will attach to the bottom of this?

A: To mount the Wooden Camera Micro Power Accessory Plate to 15mm rails, you would need the Wooden Camera Mini Accessory Rail Kit, BH #WOA00437, the Wooden Camera Bolt-On Accessory Rail Clamp, BH #WOA00350, and the Wooden Camera Universal Dual 15mm Rod Clamp for Bolt-On Accessories, BH #WOA00352.

Q: 7. Are there any 1/4"-20 mounting holes on the bottom for mounting to a 15mm rod adapter?

A: The Wooden Camera Pro V-Mount Battery Plate with 3 x D-Taps does not have a receiving point anywhere on the unit.

Q: 8. Will this work on Aktiv10T head?

A: No, the Wooden Camera Micro Touch-and-Go Plate only fits in the Fits Sachtler 8T/FSB 6T/FSB10T, as listed right in the key specs of the listing of the plate.

Q: 9. How can you mount this to a 15mm rod setup?

A: Hi Michel. To mount this battery plate to 15mm rods, you would first need to attach it to our Battery Slide (a href= https://www.woodencamera.com/battery-slide-p/156600.htm target= _blank https://www.woodencamera.com/battery-slide-p/156600.htm/a). From there, you can install our Rod Clamp (15mm LW) (a href= https://www.woodencamera.com/rod-clamp-15mm-lw-p/150200.htm target= _blank https://www.woodencamera.com/rod-clamp-15mm-lw-p/150200.htm/a), which will allow you to slide the configuration onto 15mm rods. You can also consider attaching the battery plate to our Battery Swing (a href= https://www.woodencamera.com/battery-swing-p/245700.htm target= _blank https://www.woodencamera.com/battery-swing-p/245700.htm/a), which has a rod clamp pre-installed.

Q: 10. Will this be able to connect to an Arri Alexa Classic EV camera?

A: The Wooden Camera Pro V-Mount Battery Plate with 3 x D-Taps can be made to power most any camera including the Arri Alexa Classic EV. We recommend you contact the Studio at B&H for further assistance.