The DB 9-Pin Male to Male Mini Gender Changer from Tera Grand is a PCI DSS compliant mini gender changer with DB 9-pin male to male connectors.

PCI DSS Compliant

Related Questions and Answers

Q: 1. Does this work with the D850?

A: The Tether Tools TetherPro USB Type-C Male to 5-Pin Mini-USB 2.0 Type-B Male Cable (15', Black) is incompatible with the Nikon D850 DSLR Camera. Instead, get the Tether Tools TetherPro USB Type-C Male to Micro-USB 3.0 Type-B Male Cable (15', Black), BH #TECUC3315BLK.

Q: 2. Are these shielded cables?

A: Yes, the PTZOptics 8-Pin Male to Male Cascade Cable are shielded cables.

Q: 3. Would this cable work for the Godox VL 300?

A: Yes, this will work with the Godox VL 300. But you might be needed a Female 4-pin XLR ot a Male 4-pin XLR cable. https://www.bhphotovideo.com/c/product/1091267-REG/genaray_mb_bcxlr_12v_battery_xlr_cable.html BH #GEMBBCXLR

Q: 4. Neutrik NC4MX-B 4-Pin XLR Male Connector will these fit canon xa20

A: If you're looking to plug a mic into the hot shoe inputs, you'll need a three pin version.

Q: 5. When line-in is plugged into Sony FX30 (1/8" plug), volume control has no bearing. Does this cable help in any way?

A: No. The Remote Audio Unbalanced Adapter Cable 3.5mm RA TS Jack to 3-Pin XLR Male with 40 dB Pad (18") would typically not be used for connection to a camera's 3.5mm mic input since it has a male XLR connector, not a female XLR connector. A cable with a female XLR connector would be used when going out of an XLR output. This cable would be used to connect from a 3.5mm TRS line output to an XLR mic input.

Q: 6. Can this cable be used to run line level audio from a mixer to the camera?

A: Yes, you can use the Mogami Gold Stereo Mini Male to 3-Pin XLR Female Microphone Cable to send line level audio from a mixer to a camera, but you must use an in-line attenuator such as the Hosa Technology ATT-448 In-Line Switchable Input Attenuator with 20, 30 or 40dB of Attenuation (B&H # HOATT448) to pad the line level signal so it does not overload the camera's mic input. The ATT-448 can connect directly to the mixer or you can use an additional XLR cable between the mixer and attenuator if you need more length.

Q: 7. Will this connect my Canon Powershot camera or DLSR to a new Amazon (2019) Fire 10 tablet?

A: No, it is not compatible.

Q: 8. Does this wall plate come with a cover or do you have to purchase it separately?

A: The covers are available as separate purchases: RDL CP-1B Single Cover Wall Plate (Black) B&H # RDCP1B

Q: 9. Can I remove the screw and make it 1/4 20 female screw hole?

A: The Matthews 5/8" Baby Pin with 1/4"-20 Male Screw BH #MA7012 is fixed. For a female 1/4-20 thread on a baby stud you could use B&H # IMSRP112P.

Q: 10. Would this be suitable for cutting headphone level to mic level?

A: The Sescom XLR Male to XLR Female In-Line Attenuator (-50 dB) will bring a line level signal down to mic level, although it should be noted that a headphone signal does not have the same impedance as a true line output.