The Neutrik NO2-4FDW-1-A opticalCon DUO Chassis Connector is D-shaped, female, and works with both opticalCon and standard LC-Duplex connectors. The connector is dust and water resistant, achieving an IP65 rating when mated with a male connector, and using the included rubber gasket. Mounting the connector without the rubber gasket will save some space, but lowers the IP rating to 52.

It features a push-pull mechanism that has a built-in shutter with a silicone gasket that protects the optical connection from dust and dirt. It accepts standard LC connectors on the rear, which simplifies installation, and includes black, blue, and green color coded rubber seals that can be used to identify the fiber mode.

LC-Duplex Connector Compatibility    IP65/52 Water/Dust Resisstance Rating    Silicone Gasket Provides Dust Protection    Push-Pull Locking Mechanism    LC-Duplex Rear Connection    Color Coded Sealing Mode Identifier

Related Questions and Answers

Q: 1. B&H has Neutrik NC7FXB described as a 7-pole 3-pin connector. The photo shows a 3-pin connector. Is that correct? Or is it 7 pins?

A: That is correct, this is a 3-Pin Female XLR Connector. It has 7 contact points inside it, which is what 7-pole means.

Q: 2. Does this have OpticalCON Duo or Quad?

A: It's DUO.

Q: 3. Does this connector also support single mode fiber? The manufacturers website seems to indicate that it does

A: Yes, The Neutrik NO4FDW-A connector will support single mode configurations. Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard Multi mode – black Single mode PC – blue Single mode APC – green More info - https://bit.ly/3ORnd5w

Q: 4. Isn't this a male connector?

A: It's confusing but it is a female connector, the contacts are recessed inside and the panel mount or couplers are male

Q: 5. will these accept an 8awg wire? I am trying to use on a QSC PLD 4.5

A: Unfortunately it will not. According to the Manufacturer this works with wires between 16 - 12 AWG.

Q: 6. How do you terminate these connectors? DO you have a detail showing this?

A: This is the manufacture's product information on the installation:a href= http://datasheet.octopart.com/NO2-4FDW-A-Neutrik-datasheet-23702221.pdf target= _blank http://datasheet.octopart.com/NO2-4FDW-A-Neutrik-datasheet-23702221.pdf/a

Q: 7. Will this connector work with an opticalcon lite connector?

A: Yes, the Neutrik NO4FDW-A Multi-Mode opticalCON Female Quad Chassis Connector (Black) is compatible with LITE or ADVANCED opticalCON cables.

Q: 8. Does this connector work with dual LC as well? Not only with a OPTICON connector only? thanks.

A: The Neutrik Multimode OpticalCon Duo Chassis Connector (Black), B&H # NENO24FDWA, works with dual LC.

Q: 9. Does Neutrik make female in-line 2-pole Neutrik connectors? This is obviously a male.

A: I hope this is what you are looking for: a href= http://www.bhphotovideo.com/c/product/838670-REG/neutrik_nl2mp_speakon_2_pole_male.html target= _blank http://www.bhphotovideo.com/c/product/838670-REG/neutrik_nl2mp_speakon_2_pole_male.html/a

Q: 10. Will this cover work for the switchcraft D panel rocker switch?

A: Yes, The Neutrik SCCD-W Spring-Loaded Cover for Select Chassis Connectors is designed to work with Panel connectors like the Switchcraft D panel connectors. Compatibility XLR D Series female XLR D Series male 1/4" Jacks D Series speakON NL2M* and NL4M* powerCON 20 A Series NAC3MPA* and NAC3MPB* powerCON TRUE1 NAC3MPX opticalCON chassis connectors USB NAUSB-W* HDMI NAHDMI-W* D-SUB NADB* Firewire NA1394-6-W* etherCON D Series etherCON CAT6 chassis connectors etherCON CAT6A chassis connectors BNC D Series Phono (RCA) chassis connectors Note: Maximum allowed opening angle during installation is 100°. Maximum panel thickness is 0.06"/1.5mm in combination with ether CON NE8FD* receptacle.