Increase power efficiency for your entire system with the Gigabyte UD1300GM PG5 1300W 80 Plus Gold Power Supply. Designed for long-lasting performance, the UD1300GM PG5 balances raw power and efficiency to empower your gaming level components.

Equipped with a 1300W single +12V rail and utilizing Intel ATX12V 3.0 technology, the UD1300GM PG5 enhances throughput with an 80 Plus Gold efficiency rating. A modular cable design allows you to pick and choose the cables you need for your system which reduces internal clutter and promotes airflow. The UD1300GM PG5 includes eight PCIe 6+2-pin connectors to support various peripherals as well as utility and graphics cards. A dedicated PCIe 5.0 x 16-pin connector supports high-end NVIDIA graphics cards. You also get 12 SATA and two 4-pin connectors. A 140mm internal fan equipped with Fluid Dynamic Bearings keeps your internal components cool under heavy loads.

1300W Single +12V Rail    140mm Cooling Fan    Intel ATX 12V Version 3.0    1 x PCIe 5.0 16-Pin Connector    8 x PCIe 6+2-Pin Connectors    12 x SATA Connectors    Modular Cable Design    80 Plus Gold Efficiency Rating    Yellow Tipped 16-Pin Connector    Fluid Dynamic Bearing Fan

The UD1300GM PG5 can sustain up to 2x total power excursion. It is fully compatible with Intel Power Supply Design Guide (PSDG) ATX 3.0 standard which supports up to 200% power excursion, reaches 70% low load efficiency, and complies with required power supply timing standards.

The main capacitors use high quality Japanese capacitors to produce the efficient performance and ensure the longer reliability. Compared with the standard thermal solution, we have enlarged the heatsink and optimized the airflow. The heat dissipation performance is increased, thus prolonging the service life of the components. The fan speed is adjusted according to the automatic power detection and stops when the system is idle or under low load. The double ball bearing fan provides longer and more stable lifespan.

80 Plus Gold certified ensures to deliver 90% efficiency at 50% load. The better power efficiency leads to less power waste, less heat and less fan noise.

The +12VHPWR and the +12V can provide a total of 1300W power output. The +12VHPWR can provide up to 600W for the latest PCIe Gen 5.0 graphics card.

Related Questions and Answers

Q: 1. Can this power nuckeus m motors for dslr camera use

A: Just as long as you use a Gold Mount Battery with it, yes it can. This has a D-Tap Accessory Part that you can use with the power cables included with the Nucleus-M.

Q: 2. Can you mount two of these to the Advanced Ring Grip for RS2?

A: Yes, in terms of available space, you can certainly mount two of these to the Advanced Ring Grip.

Q: 3. Could I power the module with this? https://www.bhphotovideo.com/c/product/1590487-REG/anton_bauer_8475_0142_p_tap_charger.html

A: If you consider using the edelkrone power module you would be able to power up your each edelkrone setup with a single battery (Gold Mount or V- Mount). For instance, if you would like to use V-Mount battery, you need to buy the Power Module V-Mount. Both of these Power Module's have 4 DC output socket, so, in terms of operation, there is not any difference in between them as well. A Gold Mount battery cannot be attached to the V-Mount Power Adapter and vice versa. On the other hand, V-Mount and Gold Mount batteries have D-Tap output on their bodies. Power Module's D-Tap port allows the user to power up their different devices (for instance, camera) by using a D-Tap cable from the Power Module.

Q: 4. Is it UL Listed?

A: Yes, the following item is UL compliant. Ul listed E480146

Q: 5. does this system allow you to charge your Gold Mount battery before your shoot via wall plug? or would I need to buy a Gold Mount Battery Charger separate?

A: This does not charge your batteries. You would need an additional charger.

Q: 6. The 86 Wh version of this does not allow simultaneous use of main power and USB ports - it has to be one or the other. Is that true in this version also?

A: The PowerTank Lithium Pro will have the ability to utilize the 12V output port, the USB ports and the cigarette lighter port at the same time.

Q: 7. Does this unit have a AC input

A: Hello,The only form of power input on this plate is the battery that you attach to the unit. There are several power outputs, in addition to the outputs that may exist on your battery's housing, but there is no mechanism for feeding power to the plate besides the battery that is mounted.

Q: 8. Does the D tap output also ACCEPT power via d-tap, thereby powering the ring? I ask because the gold mount plate doesn't work for many people, it's poorly designed to foul the gimbal or top handle when a 'normal' gold mount battery is attached. So I would like to know if i can attach a gold mount to the ring via a basic clamp mount (so not feeding power through pins, just a bog standard clamp), then make a male- male D-tap cable and plug INTO the power supply module's output from the battery's dtap output. IF that would work, it would make any other power supply modules on the ring 'hot' for accessories. Sorry for such a long question but i wanted to give the reason for it so you understand the dilemma. Please let me know? I have like 24 Gold mount batteries so i'm not excited to switch to Vlock system just for this bladdy gimbal

A: The Dtap connector on the Tilta Power Supply Module for Ring Grip will only output power.

Q: 9. Does this work with C500 markII?

A: While it may work, we recommend the Core SWX Cube 200 Power Supply Kit with 4-Pin XLR Cable (6') BH #COCUBE2006C instead as it has a bit of a higher output voltage at 14.3 VD. https://bhpho.to/37Rndv9

Q: 10. Will this PowerBank handle low temperature storage ok (Package sent from B&H, delivered to my door and I'm not at home) when outside temperature is close to 0 F on the nights?

A: Yes, since its core is Lithium-ion it does very well in cold temperature.