The 550nm, 62mm Kolari Vision Pro Gen 3 Infrared Lens Filter is fitted with precision machined brass rings, enhanced grip, and a superior lifetime warrantied construction while maintaining a low profile over your lens. This external infrared filter is perfect for adding to a full-spectrum conversion or on top of another infrared conversion to get a different effect. The filter features a hydrophobic AR coating that increases scratch resistance and causes dust, smudges, fingerprints, water, and even permanent marker to slide right off its surface with minimal effort. The brass ring construction features front and rear threading and an aggressive grip knurling for easier filter removal.

High-Transmission IR Glass    Anti-Reflective, Anti-Smudge Coating    Front and Rear Threaded Slim Brass Ring    Aggressive Grip Knurling

Related Questions and Answers

Q: 1. Will this fit a zeiss Otus 85mm f/1.4? the Otus has 86mm front filter thread.

A: Yes this should fit perfectly.A very appropriate choice for such a lens!Colin

Q: 2. Will this fit the Nikkor Z 35mm lens?

A: If you are referring to Nikon NIKKOR Z 35mm f/1.8 S Lens then yes the B+W Pro Snap-On Lens Cap (62mm) will work.

Q: 3. I apologize in advance for asking! Filters that you sell B+W 77mm XS-Pro UV MRC-Nano 010M and B+W 58mm XS-Pro UV MRC-Nano 010M are made in Germany or in China?

A: According to the information we have, our current inventory's Country of Origin is Germany. Please be aware this can change over the product's production life without notice.

Q: 4. When I use this filter on Canon EF-S 18-135mm f/3.5-5.6 IS STM Lens can I install, remove and reverse Canon hood without removing the filter?I had Nano filter on 18-55 mm lens, and I had to remover the Nano filter each time I wanted to remove the hood or reverse the hood. Filter's edge was made thicker in order to compensate the thinness of the lens casing.

A: i used 3 nano filters of various dimensions. None of them interfered with the hood of the lens. i am using 67mm for my 35 F2 IS and for 100mm macro L. i am not having any issues with respect to hood installation.

Q: 5. Can I directly attach this on the Hasselblad XCD 45/p lens, and will the lens cap fit with the hood on?

A: The Sensei PRO 62mm Aluminum Lens Hood does screw into the front of the Hasselblad XCD 45mm f/4 P Lens. The lens cap that came with the lens will not fit when the hood is on.

Q: 6. Does the new Canon E-82 II 82mm Lens Cap fit with this filter?

A: Yes it does. And it stays on. The outside threads on the filter grip the lens cap -- same as if you put the lens cap on the lens without the filter.

Q: 7. I’m a little confused, do we need an extra aluminium ring to tight the filters to the lens ?

A: If the lens has a front threaded size of 82mm, this filter would fit right into that.

Q: 8. According to the write up: Note: This filter ring's outside diameter is slightly larger than the actual thread size, and because of this you may be unable to attach the lens manufacturer's bayonet-mounted lens hood to the lens while using this filter. This is dependent on your specific lens and how thick the front rim of the lens is; with thinner, low-profile lenses usually being affected more.So if I apply this model B+W on a Nikon 50mm 1.8G lens, will the Nikon lens cap and the Nikon lens hood snap onto the threads? Thanks.Del

A: I am using the 58mm XS-Pro UV MRC-Nano 010M Filter on a Nikon 50mm 1.8G lens. I have had no problems at all with the lens cap or hood when this filter is on the lens.

Q: 9. What is the thread pitch on this lens? Is it 0.5 or 0.75 mm?

A: As per the manufacturer, the thread pitch for the B+W 40.5mm XS-Pro UV Haze MRC Nano 010M Filter is 0.75mm.

Q: 10. Can you use this filter with the Leica Q lens hood?

A: Yes