Simple to attach and operate, the Neewer LS-T8 1.25" Variable Telescope Accessory Kit lets you connect a Nikon DSLR body to a standard 1.25" telescope focuser for astrophotography. The kit includes a variable-length extension tube to increase focal length for higher magnification. The setup is simple—the LS-T8 attaches to the camera body with a bayonet mount T-ring. Add the 1.25" T-adapter and slip it into the telescope's eyepiece holder without the extension tube, or put your telescope's eyepiece inside the extension tube and then mount the focuser for high-power magnification.

Please note that the LS-T8 only works with DSLRs, not mirrorless cameras, and it is compatible with refractor and catadioptric telescopes but not with reflectors.

Camera Body-to-Telescope Adapter    Extension Tube for Higher Magnification    Not for Use with Mirrorless Cameras    Use with Refractors & Catadioptrics    Durable Aluminum Construction

• The extension telescope camera adapter easily connects a Nikon DSLR camera body to your telescope with a T-ring. Put your telescope eyepiece inside the adapter's extension tube to magnify for more details and clarity.
• The variable extension tube allows you to adjust the magnification to get just the shot you want.
• Two mounting options: Place your telescope eyepiece into the eyepiece holder of the extension tube to achieve a long focal length and higher magnification, or connect the tube to your telescope without an eyepiece.
• Sturdy anodized aluminum construction.
• Compatible with 1.25" filters.
• Compatible with refracting and catadioptric telescopes with 1.25" eyepieces, not for reflecting telescopes.
• Compatible with Nikon DSLR cameras.

Related Questions and Answers

Q: 1. Will this work on the Astrofi 130?

A: The Celestron PowerTank 7 Ah 12 VDC Power Supply is compatible with the Celestron Astro Fi 130mm f/5 Reflector Telescope.

Q: 2. Will this work with Godox X2 2.4 GHz TTL Wireless Flash Trigger?

A: No. The following item would be needed in order to communicate with the x2 system. Please review the following item Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/3HduVCk

Q: 3. Could it be carried on board aircraft? Please advise us. Thank you

A: Traveling with batteries have many rules and regluations and can changed based off of the different airlines. It woud be best to check with the airline you are using before you fly.

Q: 4. Will this work with Nikon D3500?

A: This will work with a Nikon D3500.

Q: 5. Will it work as a slave or master with my SB-800?

A: Hi, this flash will work as a slave, but not a master, with the SB-800.

Q: 6. Can I use this for meade LX 90 12 inch telescope?

A: Yes, along with the Meade #607 25' (7.6 m) Cigarette Lighter Adapter BH #MEPCDCETX • MFR #07043 https://www.bhphotovideo.com/c/product/202533-REG/Meade_07043_607_25_7_6_m.html

Q: 7. Will the neewer kv 750li ttl flash work on my nikon d600 camera?

A: Yes, the Neewer Nikon Vk750 Ii+Sb 900 Diffuser+Trigger+Color Filter+Diffuser+Battery would be compatible for use with the Nikon D600 DSLR Camera.

Q: 8. Is it compatible with a Nikon D3200?

A: Yes, the Neewer 750II TTL Flash for Nikon DSLR will work with the Nikon D3200.

Q: 9. Does this use an LED bulb?

A: The small light on top (with the red cap) is a small, relatively dim, incandescent bulb with a yellowish tint (unless you have the red cap on, which makes it red). The bottom larger light contains 30 white LEDs and is pretty bright. It doesn't compare to a nice CREE flashlight or anything, but the beam is bright and wide.

Q: 10. Does the 750II work on the Nikon z6ii camera?

A: Yes, according to Neewer, the 750II TTL Flash is compatible with the Nikon Z6II (and Z7II).