The 62mm Kase KW Revolution Professional ND Kit features ND8, ND64, ND1000, and CPL magnetic filters as part of Kase's color-coded KW Revolution filter system. The filters are designed with color-coded filter frames for easy identification and swapping. The ND8 is color-coded blue, the ND64 is yellow, the ND1000 is red, and the CPL is silver. The kit also includes adapter rings, a filter case, and one front lens cap. The KW Revolution system is based on Kase's earlier Wolverine series and is fully backwards compatible with Wolverine filters.

KW Revolution filters are made with shock-resistant and water-resistant optical glass that's durable, easy to clean, and doesn't cause any color cast. In addition to being magnetic, the filters are also front threaded. This is one of the differences between the KW Revolution series and the earlier Wolverine series.

This kit includes both the standard magnetic adapter and the inlaid magnetic adapter supported by the KW Revolution series. The standard one screws onto your lens and lets you magnetically attach the filter to it. But the inlaid adapter works a bit differently. It secures to your lens in a very recessed way. It screws onto the front filter threads very close to the front lens element and nearly hidden within the filter thread area. It hardly leaves any space between the lens and filter. This results in minimized vignetting with wide angle lenses when you attach the filter. The filter snaps onto the adapter magnetically. Up to four filters can be stacked in total, both from this KW Revolution series and from the earlier Wolverine series, and the filters can be freely rotated. Please see more about the inlaid adapter below.

0.3, 1.8 & 3.0 Optical Density    Shock-Resistant Glass    Color-Coded Magnetic Filters    Includes Filter Case and Front Lens Cap    Standard and Inlaid Magnetic Adapters    Stackable    Front Threaded    Compatible with Kase Wolverine Filters

When your KW Revolution filter (or backwards compatible Wolverine filter) is removed from the inlaid adapter, you can leave the adapter on the lens. It will not interfere with attaching the original lens cap to the front of your lens. Similarly, it won't interfere with screwing in regular screw-in filters to the filter threads of the lens.

Besides securing directly to the lens, the inlaid adapter can instead be screwed onto the front threads of regular screw-in filters. The screw-in filter can then be screwed onto your lens, and the inlaid adapter will be on the front of that filter. You can then magnetically attach KW Revolution and Wolverine filters onto the adapter. The benefit of this flexibility is that it allows you to mount the KW Revolution filters on top of regular screw-in filters that you may want at the bottom of your stack.

The inlaid adapter is not compatible with step rings.

There are a few ways to screw in the ultra-slim inlaid adapter. The main way is to first attach it magnetically to one of the included ND filters, and to then screw in both by hand. This allows you to remove the filter or stack additional ones onto it. You can also attach the optional Kase magnetic lens hood.

Related Questions and Answers

Q: 1. Will a 1DX mark ii fit on this rig?

A: This kit will work with 1D body

Q: 2. Does the 62mm size work OK with a 55mm lens and a 55-to-62mm step-up adapter, or is it better to just get the 55mm size?

A: The 62mm version can be used on a 55mm diameter lens with an adapter ring. However, I would not recommend buying the 62mm version unless you also have a 62mm diameter lens.

Q: 3. Do Kase filters work with Nikon Z lens?

A: The filters you would need would be: https://www.bhphotovideo.com/c/product/1602142-REG/kase_1128040002_3_filter_set_nd8_nd64_nd1000_f.html Or you could use the filters in question if used in tandem with the FTZ adapter.

Q: 4. How is this shipped? Will I receive multiple boxes for each kit component or will it be one box with the case that contains the remaining kit components?

A: All the components will be nicely arranged in the pre-cut foam insert in one protection case! So you will only receive one box.

Q: 5. Can you get a dummy battery for a GH5 for this kit?

A: Here you go: Lanparte BLF19P-01 DC Battery Dummy Pack B&H # LABLF19P01. The GH4 and the GH5 use the same battery.

Q: 6. Hi!Can we use this one with the Canon eos 1Dc?Thanks

A: You can use the Canon 1D C with the Lanparte Professional Kit V2B. The L bracket that comes over the camera, it's height is adjustable so that any DSLR can fit.

Q: 7. Will the battery pack power a A7S camera?

A: You would need an adapter such as B&H#: WOWC194700 which would convert the battery used within the A7s camera into a D-tap connection in which you could connect onto the D-tap port on the Lanparte V-mount battery plate.

Q: 8. Would this rig work with a Blackmagic Ursa Mini?

A: The Lanparte Professional DSLR Kit V1 is for a DSLR camera therefore I believe it would not work.At this time, there is no rig specifically for the URSA Mini since it is so new it is not out yet. I would look for offerings by Lanparte, Wooden Camera, Zacuto and SHAPE.Attached is a basic rig that would get you started.

Q: 9. What kind of filter is this? How do you use this filter when the lens does not accept screw-on filers?

A: The Kase ND64 Neutral Density Filter is a drop in filter that slides into the rear filter slot of the FUJIFILM XF 8-16mm f/2.8 R LM WR Lens.

Q: 10. Are there actually different sizes of optics in the variations offered (55, 62, 72, 77mm) or is it just different housings?

A: Yes, there are different size optics in each of the variations of the Opteka 10x High Definition II Professional Macro Conversion Lenses.