Generate crystal-clear clock-synced delay for looping, echoes, sound on sound, Karplus-Strong synthesis, and more with the white 4ms Dual Looping Delay, a Eurorack-compatible clock-based delay module designed for creative synthesis.

By default, a looping delay records and plays continuously, though recording can be suspended at any time with Infinite Repeat. Sustain of delays and loops is mainly accomplished with regeneration, allowing an organic, evolving approach to sound creation as new material replaces old, more or less gradually. The 4ms Dual Looping Delay also provides advanced clock input and output facilities that allow for locking delayed and looped material with sequencers and rhythmic devices. The module ships with a ribbon power cable and mounting screws.

Delay, Looping, Echo, Sound on Sound    Synchronized Loop or Echo Time    Up to 3 Minutes Delay/Loop Time (16-Bit)    48 kHz Sampling Rate, 16- and 24-Bit    Normaled I/O for Mono, Stereo, Dual Mode    Tap Tempo Button and Clock Ping Set Beat    CV for Time, Feedback, Delay Feed, Mix    Send and Return + Loop Clock Out    Reverse and Infinite Hold    Includes Power Cable + Mounting Screws

• Ping Lock for each channel
• Quantized Inf/Rev/Time Change Mode
• 24-bit audio (selectable with a jumper)
• Reverse and Inf Hold can be toggled with gates or triggers
• Delay Feed knob can be selected to be audio or linear taper
• Runaway DC at high feedback settings (e.g. resonant delays) is eliminated
• Auto-Muting now has a 1 ms attack and decay
• Cross-fade Time (CFT) for splices is now variable (set in System Mode from 0 to 500 ms)
• Selection of External Clock De-jittering algorithms to allow the DLD to sync with many types of external clocks
• Exiting Infinite Hold plays through, without restarting loop

• Two independent delay/loop channels, synchronized to a common time base
• Almost 3 minutes delay/loop time per channel (2:54) in default storage mode (16-bit)
• 48 kHz / 16-bit sampling rate, option available for 24-bit storage
• Extremely quiet, low noise and low jitter design
• Normaled connections of input and output for flexible use in mono, stereo, or dual mode
• Tap tempo button and clock Ping input set the basis for one beat
• Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
• Sample-accurate clock output for perfect synchronization
• Loop clock outputs for each channel
• Time switches change range of Time knob from 1/8th notes up to 32 bars
• Digital feedback, up to 110%
• Delay Level control, independent of dry/wet signal mix
• Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
• Reverse mode plays memory contents backwards
• With an infinite loop locked, knobs or CV can window around memory, by shifting the loop
• Triggered toggle inputs for Infinite Hold and Reverse
• Send and Return on each channel for feedback with external modules
• CV jacks to control Time, Level, and Feedback

• 20 HP Eurorack format module
• Maximum depth: 0.98" (25mm)
• Includes power ribbon cable with 16-pin Eurorack power headers
• Power consumption: +12V: 188mA, -12V: 48mA

Related Questions and Answers

Q: 1. So to use this WM-50P module I need to also acquire the $1,320 AJ-SFU3100 Software to download onto an i-Pad or Galaxy device?

A: No, you do not need the AJ-SFU3100 Software. That software is just used to enable the wireless LAN option for the AJ-HPX3100G P2 Camcorder.

Q: 2. Will this work with eva1?

A: Yes, this is compatible with the EVA-1.

Q: 3. how long are cables ? 13.5 ? 10 between mics ?? people should be one on the other NO ?

A: HelloHelloFrom the 1/8 plug you have 4'-0 to a molded stop on the cable , from the stop to the microphone each cable is 10'-0 . So I the perfect world you can separate the microphones 20' but you would only be 4' off the plain. I have a 10' headphone extension cable works great! Gives me 14' to the molded stop. CheersMike

Q: 4. Is it possible to use these in a mulicamera setup in the same room?

A: Panasonic lists this device as working on several frequencies. However, the scenario you are asking about has not been reported. See here for more information. http://bit.ly/2tNXAvW

Q: 5. Which software can I download to use this module with a CX350, on both a Windows laptop and an iPad?

A: The software for using the Panasonic AJ-WM50P Dual-Band Wireless Module on the Panasonic CX350 on IOS and Android is CX ROP. For PC and Mac, there is more than one program and the downloads for them can be located at: https://pro-av.panasonic.net/en/software/

Q: 6. How many times can one download the software as users replace their notepads or other devices? Is the software transferable to other devices?

A: The Panasonic camera control apps are free and can be downloaded as many times as the user needs

Q: 7. I am looking for an inexpensive option for binaural recording and these mics look like just the thing. I just need to know, does each mic have two channels (ie, it's own l and r channel) or do each mic function as one channel each when recorded on a dslr?

A: Each mic goes to a difference channel and is separate. However, I don't recommend these for binaural recording, which requires greater sensitivity to be successful. These are very cheap mics and the battery system is clunky. I wish this system was executed in a better quality system but unfortunately it is not. There are better choices for binaural recording.

Q: 8. How long does one battery last?

A: The battery life is not specified. However, users say they get about 40 hours. I've had this mic set for over a year with a spare battery. It is still running on the original cell. It goes on, and on and on. Keep a couple of spares and don't worry about it. It's not a problem,

Q: 9. Will this support Miracast on Panasonic projectors?

A: No, the Panasonic AJ-WM50P Wireless System is designed to plug into Panasonic cameras to allow wireless metadata input/display and proxy playback on iPads, iPhones, and PCs.

Q: 10. Can you stream from the XU90 with this device from the camera ?

A: While this will work with the UX90, it is for control through WiFi. The UX90 does not have streaming built in.