Generate crystal-clear clock-synced delay for looping, echoes, sound on sound, Karplus-Strong synthesis, and more with the 4ms Looping Delay, a Eurorack-compatible clock-based delay module designed for creative synthesis.

Not a tape or analog emulation, but a modern digital delay, the Looping Delay combines features of delay, looping, and sample-tight synchronization, for powerful and dynamic sound capture and modification. Based on the Dual Looping Delay, the Looping Delay offers the same high-quality sound.

Delay, Looping, Echo, Sound on Sound    Synchronized Loop or Echo Time    87 sec Delay/Loop Mono (43 sec Stereo)    24-Bit, 48 kHz Sampling Rate    Low Noise and Low Jitter    Tap Tempo Button and Clock Ping Set Beat    CV for Time, Feedback, Delay Feed, Mix    Send and Return + Loop Clock Out    Reverse and Infinite Hold    Includes Power Cable + Mounting Screws

• Stereo or mono mode (Return/Send becomes right channel In/Out in stereo mode)
• 87 seconds maximum delay/loop time in mono, or 43 seconds in stereo.
• 48 kHz / 24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
• Extremely quiet, low-noise, low-jitter design
• Delay and loop time is syncable to a clock or a division or multiplication of a clock
• Infinite Hold mode for looping and windowing
• Reverse feature for toggling direction of playback
• Feedback ranges from 0 to 110%
• 1V/octave tracking for Resonant Delays (Karplus-Strong)
• Wet/Dry mix output, as well as dedicated Send/Return for feedback loop
• CV and trigger inputs for all features

• Time switches change range of Time knob from 1/8th notes up to 32 bars
• Digital feedback, up to 110%
• Delay Feed control, independent of dry/wet signal mix
• Infinite Hold mode disables recording and plays a loop
• Start and End points of loop can be modified in real time for scrubbing or windowing
• Reverse mode plays memory contents backwards
• Resonant Delays (ala Karplus-Strong)
• Delay time can be as short as 650 microseconds
• Time CV jack can respond at 1V/octave in Unquantized Time Mode
• Trigger inputs for toggling Infinite Hold and Reverse
• Send and Return for feedback with external modules
• Send and Return function as right channel In and Out in stereo mode
• CV jacks to control Time, Feedback, Delay Feed (record level), and Mix
• Various algorithms can be selected interfacing with jittery external clocks (External Clock De-jitter)
• Quantized Change Mode quantizes toggling of Infinite Hold and Reverse

• 16 HP Eurorack format module
• Maximum depth: 1.1" (28mm)
• Includes power ribbon cable with 16-pin Eurorack power headers
• Power consumption: +12V: 125mA, -12V: 45mA

Related Questions and Answers

Q: 1. Which MiniPC mount is compatible with this monitor ?. Or is the HP B550 16U00AA mount compatible with the HP 27 "Z27k G3 1B9T0AA # ABB monitor? well thank you Best Regards Milan S.

A: This mount will allow you to mount a HP Mini Workstation to the back of the monitor. https://bhpho.to/3ntVa0h

Q: 2. Can this monitor connect with a MacBook air?

A: Yes, this HP E24mv 24" 16:9 Conferencing IPS Monitor will connect with a MacBook air. Depending the the model, you will need an adapter.

Q: 3. how do you place this on your sun sniper strap?

A: The Wimberley Module 8 M-8 Perpendicular Plate is not designed for use with the Sun-Sniper Camera Strap. It is designed for use with an Arca-type quick release plate mounted to the tripod mount on your camera, and gives you perpendicular movement of the camera when mounted on a gimbal or ball head. As it would be connected to the camera's tripod socket, it cannot be used simultaneously with the Sun-Sniper Camera Strap.

Q: 4. Does this have a VESA mounting option?

A: No, the HP Z27u G3 27" 16:9 IPS Monitor does not have a VESA mounting pattern.

Q: 5. For sound triggering, can you adjust the sensitivity of this device? Also, can you set it to delay the shutter release after it detects the sound? If so, for how long and what increments? Thanks.

A: I have only used the Captur Pro once while target shooting so far but I intend to do so more often. I had some confusion about the sensitivity but that was more not reading the directions carefully first. The lower the number the less sensitive the unit will be and I needed to make sensitivity number very low to react only to the sound of discharge and not wind noise (it happened to be a very windy day and it took a while to get the right setting to compensate for wind moving over the unit). I don't remember exactly the delay setting I used but it was around one or two milliseconds. You will have to play with the timing. The movement of the slide mechanism is very fast but I was able to capture images of spent cartridges being discharged from the pistol. As a side note I also use the unit as a remote for my Canon 60D. The button between the Lock and the Start/Stop buttons is the remote trigger. Hold halfway and it focuses, press all the way down and activates the shutter. Also, as a bonus it works with my old Canon 20D. You have to order the cords separately but they are not very expensive. The other option is to order the remote controllers but I decided not to do that just yet. Hope this helps.

Q: 6. Is this support my 758D which is CE spec? Thank you.

A: No it would not. In the USA we are prohibited from dealing with radio devices designed for other regions. You would have to purchase this item in your own country/region. The units we carry only work on USA FCC frequencies.

Q: 7. How bright (in nits) is the minimum brightness setting?

A: HP only specifies the monitors brightness at its maximum, which is 400 cd/m2. The reason being is that when the brightness is set the lowest setting, "the image can appear as blurred, indistinct, or too dark," as noted HP's manual for the monitor.

Q: 8. Hello, do you have the PocketWizard PowerMC2 using the Frequency version that is CE 433.42 - 434.42 MHz ? Because my PocketWizard TT1 and TT5 is adopting the Frequency CE 433.42 - 434.42 MHz ?

A: Unfortunately, we do not carry the CE frequency triggers. All of the Pocket Wizard transmitters and receivers we sell are made with frequencies for the USA market. We do not offer any Pocket Wizard (or related products) with the European frequency.

Q: 9. I ordered this and now am looking for a laser pointer so I can trigger this via a laser. Which color laser should I be using? If it matters the distance from the laser pointer and the receiver will never be more then 20-30 feet.

A: This option will work very well "Quartet MP-1200Q Class Three Standard Pen Size Laser Pointer BH #QUMP1200Q • MFR #MP-1200Q"

Q: 10. Does the keyboard come with arabic/English?

A: No, the HP 16.1" OMEN 16-b1020nr Gaming Laptop BH #HE641K5UA comes with a North American QWERTY keyboard.