Add durability and security to ID cards made using the Matica MC310 ID card printer with this MC-L2 Lamination Module. Along with preventing tampering, lamination can extend a printed card's life to as long as 10 years. The MC-L2 laminator is simple to operate and can laminate a card in under 20 seconds. Cassettes in the upper and lower positions facilitate laminating both sides of printed cards. The laminator attaches to the printer by means of a connecting plinth, which also provides storage room for blank cards, laminating supplies, or cleaning kits. A four-line LCD display shows the control menu, error messages and warnings.

For More Durable & Secure Cards    Laminates Card in 19 Seconds    Connects Easily to Printer    Store Cards in Connecting Plinth    4-Line LCD Display

• Upper and lower cassettes for laminating both sides of cards
• For PVC or composite CR-80 cards
• Thin film overlay, clear or holographic: 1000 prints/roll
• Patch, clear or holographic: 500 prints/roll
• Patch thickness: 0.5 mil, 0.6 mil, 1.0 mil
• 150-card stacker
• Kensington lock slot

Related Questions and Answers

Q: 1. What is the minimum sustained write speed?

A: At this time, Nikon has not published a minimum sustained write speed for the MC-CF660G CFexpress Type B Card.

Q: 2. this product have all accessories: 1x Snap-on 15mm to 19mm rods adapter 3x Swing Arms (1:1.0/1:1.5/1:2.0 ratio) 2x Focus Knob/ Handwheel 1x Extension for Focus Knob 5x Module gears (0.8/64T, 0.8/38T, 0.8/43T, 0.6/64T, 0.5/78T) 1x 12 (300mm) Follow Focus Flexible Whip 1x Follow Focus Speed Crank handle 5x Marking discs 1x Hard Carrying Air Tight Safety Case ?

A: The ikan Tilta FF-T04 Film Dual Follow Focus comes with these items in the box: 2 x Hand WheelsHand Wheel Extension4 x Marking Disks5 x Drive Gears15mm LWS Support Rod AdapterWhipCrankSafety CaseLimited 1-Year Warranty So no 3x Swing Arms, and 4, not 5 Marking discs.

Q: 3. Does it have a reversible gear mechanism to use with Nikon lens ?

A: Hello again, Nicolas. After some contemplation and a second cup of coffee, it occurred to me that, for just this follow focus, if you flip the whole thing around it will effectively reverse the drive direction of both wheels. Since this follow focus has 2, and not just one, you will be able to control it from whichever side is comfortable to you, in the direction you prefer. You'll just have to remember which setup you use for your Canon lens and which you use for your Nikon.

Q: 4. Can it be plugged directly into an audio mixer to record music?

A: The VocoPro SDR-4 Digital SD Card Recorder Module is compatible only with the VocoPro PA-PRO 900, STAGE-MAN, and MOBILEMAN.

Q: 5. Panasonic Wireless module should work with ux180 also? Any experience?

A: This isnt a wireless video monitor and never intended to be. Not sure about the UX180 question, but I felt the need to clarify another users note.

Q: 6. There are no outside/inside dimensions for the case. It states it's soft, but it looks like it has structure. Does it fold?

A: The exterior dimensions of the Nikon CL-L2 Soft Case for 400mm, 500mm and 600mm are 18.2 x 13 x 9.4". It is a soft case, has a hard bottom, and it has structure because of a padded belt added into the case. It is not designed to fold up very small.

Q: 7. How is this case carried? Does it have a shoulder strap or does it have backpack straps?

A: It has a strong web heavy padded shoulder strap. Sturdy and holds a 500mm f/4 or 200-400 f/4 lens with a pro body. I do not put a body on my 200-400 f/4 lens until I am ready to shoot and do not carry a body in this case. It has 2 straps on side and top & bottom to carry tripod, also. Has a sturdy soft handle to carry the lens from top of case.

Q: 8. Will this case hold the Nikon 200-500? Is it the best one for the purpose?

A: Yes it will hold your 200-500 with a camera body attached. I ordered it for my D3s and the Nikon 600 lens. I holds them and I use this case all the time.

Q: 9. Looking for a case smaller than the CL-L3. Will the Nikon Z 800mm 6.3 fit in the CL-L2 with hood reversed, no camera ?

A: The Nikon NIKKOR Z 800mm f/6.3 VR S Lens fits in the Nikon CL-L2 Soft Case for 400mm, 500mm, and 600mm.

Q: 10. Will this case hold the Nikon 180-600mm lens?

A: Yes, the Nikon CL-L2 Soft Case for 400mm, 500mm and 600mm will fit the Nikon 180-600mm lens. It is a few inches wider than the lens though.