Providing a basic power readout and no user interactive surfaces, the Anton Bauer Titon 90 Gold Mount Lithium-Ion Battery can be used to power your Gold mount camera or other pro video gear. The lightweight lithium-ion chemistry can provide up to 10 amps of current on a continuous draw and support peaks of up to 12.5 amps for five seconds. At the side of the chassis, an LCD display screen shows battery capacity in percent remaining, and when put under load it shows the exact remaining runtime. Using the D-Tap and USB ports you can power essential accessories on your rig or other small electronics.

Official B&H 50th Anniversary Edition    4 x 92Wh Li-Ion Gold Mount Batteries    GM2 Dual-Bay Charger with 4-Pin XLR Out    P-Tap and USB Accessory Ports    Simultaneous Charging and XLR Output

For those who prefer a basic battery without multiple display window options and mode selections. Additional information can be accessed and displayed via select Anton Bauer chargers (not included).

The built-in display shows remaining power as percent. When the battery is connected to a camera or light, or otherwise put under load the display changes to show the remaining runtime. This information is available in most professional camera EVFs.

The Titon Gold mount battery supports a continuous 10A total draw between the Gold mount, D-Tap, and USB ports. It will support a 12.5A draw for up to five seconds to accommodate the high-power draw (power inrush) of devices when they start up. The battery capacity is 92Wh.

The battery uses high-quality cells and robust electronics for power distribution and safety.

It has a working temperature range of -4 to 140°F, although temperatures below 40°F can greatly reduce battery performance.

The case is made from an ABS/polycarbonate blend.

The battery can be charged with Dual or Quad Gold mount LP and Performance chargers.

You can also use other Anton Bauer chargers, as well as common competitive chargers; however, not all features and modes may be accessible with these other charges.

Related Questions and Answers

Q: 1. does it work for sony fx6 ? what is the difference between this and the Anton/Bauer Titon Micro 150 V-Mount Lithium-Ion Battery

A: With an appropriate power distribution plate, the Anton Bauer Titon SL 150 143Wh 14.4V Battery (V-Mount) would be able to power a Sony FX6, however the camera does not natively support V-mount batteries. The Titon micro batteries are smaller in form factor, but do not feature the peak draw of 12A that the Titon SL features.

Q: 2. Will this work for the JVC GY-HM700 camera?

A: No, the camera has a V-lock battery mount so you will need the V-mount version of that battery: https://www.bhphotovideo.com/c/product/1466925-REG/anton_bauer_8675_0132_titon_90_v_mount_lithium_ion.html

Q: 3. Is this compatible with Burano?

A: Yes, the Anton/Bauer Titon 90 Battery Kit with LP2 Dual Charger & Plate for Sony F5/F55 (Gold Mount) Kit with V-Mount to Gold mount converter will support the Sony Burano.

Q: 4. Does it charge well? Anton Bauer Dual 2722 Power Charger

A: Yes it should work, you may just need updated firmware on the charger.

Q: 5. Can you charge these batteries through the D-TAP port using a travel charger?

A: Anton Bauer batteries are traditionally very specialized in terms of the compatibility of chargers, thus we recommend, at minimum, the following AB charger: https://bhpho.to/38mcgWj

Q: 6. How long does it take to charge the Titon SL 150?

A: The Anton/Bauer Titon SL 150 143Wh 14.4V Battery (Gold Mount) can recharge in 4.5 hours using a product like the Anton/Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output (Gold Mount). See the link below: https://bhpho.to/3mF1cwK

Q: 7. Does it have any advantages when compared to the Titon SL? Are the cells more stable, longer life, or more protections?

A: The Anton/Bauer Titon SL 90 95Wh 14.4V Battery (Gold Mount) is a slim version of the Anton/Bauer Titon 90 Gold Mount Lithium-Ion Battery. The non-SL version offers a larger screen and wider weight dispersion for better balance on more front heavy cameras.

Q: 8. What is the life of the Titon 90 battery?

A: The titon SL 90 can run a Sony FX9 for over 2.5 hours or a Blackmagic Pocket 6K for over three hours for example which is more than six times the power of an LP series battery. Life of battery is determined by end-user but unit does come with a Limited 2-Year Warranty.

Q: 9. Is this Battery compatible with the Aputure Light Storm LS C120D II (Gold Mount) ? Thanks

A: That battery is compatible with the addition of the plate. See the link below. https://www.bhphotovideo.com/c/product/1259292-REG/intellytech_175000_anton_bauer_gold_mount.html

Q: 10. Does this work with bmpcc 4k?

A: Yes, The Anton Bauer Titon SL 90 could adapt and power many camera models using DTAP power cables. When using the following adapter cable you can power the Pocket 4k , 6K and Pro. BH #INCDTB4K. You could also mount the battery on a camera cage and 15mm rods with this V-Mount adapter BH #INVMBP4K