Add features and functionality to the Rotating Clock Divider with the silver 4ms RCD Breakout Kit. This do-it-yourself Eurorack module kit is designed exclusively for the Rotating Clock Divider (RCD). The Breakout includes six switches that set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function and does not use any extra power. The RCD Breakout Kit includes all the components needed to complete the kit as well as a silver panel.

Full DIY Kit    Beginner Level Build    Adds Features to Rotating Clock Divider    Set Maximum Divide-By Amount    Select Gate or Trigger Mode    Counting Mode: Up or Down    Spread Mode and Auto Reset    Includes All Kit Components

• Includes all the parts necessary to build a full-featured RCD Breakout
• Beginner-Level Kit: Only minimal prior experience
• Basic Hand Tools Needed: Flush snips, needle-nose pliers, and a wire stripper (not included)

• Gate Counting: Down/Up
• Gate/Trigger mode
• Divide range up to Divide-by-64
• Spread mode: Spread mode On causes the output to spread evenly amongst the entire max division range (see manual).
• Auto-Reset: 16/off

• 4 HP Eurorack format module
• Maximum Depth: 1.14" (29mm)
• Includes expansion ribbon cable to connect with the Rotating Clock Divider module

Related Questions and Answers

Q: 1. Is there space to press the button for changing lenses on the Sony A7R series?

A: There is space on my Sony A7sIII and A1. Its a bit tricky, but it works. Worth it, in my opinion.

Q: 2. What additional attachment is required for a manfrotto tripod?

A: No additional accessories are required to use this--the Silence Corner Atoll S for Sony Mirrorless Cameras has a 1/4" mounting thread on the bottom for mounting it to a tripod head and a 1/4" mounting screw for attaching the camera.

Q: 3. What extra part is needed for this collar to work on the canon R7

A: The extra part needed for the Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras (Black) to work with Canon EOS R7 is the Silence Corner Atoll Heightening Plate for C/S/D Rotating Collar (Black) BH #SIATOLLHIGHB • MFR #SC-ATOLL-HIGH-B. https://bhpho.to/3COvjGI.

Q: 4. is it compatible with my canon rebel t8i?

A: No, the Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras (Silver) will not fit the Canon EOS Rebel T8i DSLR Camera as this is made for mirrorless cameras. Instead you would need the Silence Corner Atoll D Rotating Camera Collar for Select DSLR Cameras (Silver), BH #SISCATOLLD (https://bhpho.to/3KE5Svf). You would also need the Silence Corner Atoll Heightening Plate for C/S/D Rotating Collar (Silver), BH #SICATOLLHIGH (https://bhpho.to/41zkDXc).

Q: 5. Does this fit the Canon R50?

A: The Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras is not compatible with the Canon EOS R50 Mirrorless Camera.

Q: 6. Is this compatible with the Panasonic Lumix S5 II Mirrorless Camera?

A: Yes the Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras is compatible with the Panasonic S5II. However, it cannot fully align to the lens center, But it still works with most of Panasonic lenses.

Q: 7. Not compatible with Pentax K1 Mark II?

A: The Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras is incompatible with the Pentax K1 Mark II DSLR Camera. The collar is only compatible will select MIRRORLESS cameras.

Q: 8. Is it good with z 9 s lenses ? Thanks

A: The Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras is not compatible with Z9 and the lens compatibility can be found here: https://bit.ly/3mX6BiI.

Q: 9. Would this mount work with Sigma 40mm 1.4 for Sony FE?

A: The Sigma 40mm f/1.4 DG HSM Art Lens for Sony E exceeds the 63.5mm diameter limit of the limit of the Silence Corner Atoll S Rotating Camera Collar for Select Sony Mirrorless Cameras.

Q: 10. Silence Corner told me the Atoll C would work with the Canon RF 800 f11. Is that true? There is a taper before the lens bulges

A: Unfortunately we have not had a chance to test it out on that lens. The good news is that you can return it within 30 days if you find an issue. Just keep the box and all accessories and follow our return policy.