Generate complex rhythmic structures with the 4ms Tapographical Delay (TAPO), a complex multi-tap delay in Eurorack format with a unique interface designed for live performance. The TAPO excels at transforming simple audio signals (drone or percussive sound) into complex rhythmic structures, meshes or organic textures, lush harmonic mille-feuilles, liquid and resonant effects.

The TAPO is designed to be played in real time rather than a set and forget end-of-chain effect. It's expressive, experimental nature is made for interaction. The TAPO ships with a ribbon power cable and mounting screws.

Multi-Tap Audio Delay Line    Velocity-Sensitive Force Senor for Tap    Up to 32 Taps    Each Tap: Delay Time, Amp/Filter, Pan    Low Pass or Resonant Band Pass Filters    Morph Between Delay Configurations    Two Feedback Paths: Repeat and Feedback    Save and Recall Up to 24 Delay Configs    Gate Output Plays Rhythm of Delay    Includes Power Cable + Mounting Screws

• Velocity-sensitive force sensor to tap the delay configurations (tapographies)
• Up to 32 taps, each with its own delay time, amplitude/filter, and panning
• Low-pass filter or resonant (pingable) band-pass filter on each tap
• Morphing between delay configurations, with adjustable morph time
• Two different feedback paths: a Repeat toggle and a Feedback knob
• Save and recall up to 24 delay configurations (4 banks of 6 slots each)
• Tapography sequencer with forward, random walk or random directions
• Synchronization to an external clock, with clock divider/multiplier
• Gate output that plays the current rhythm of delays
• Maximum delay time of 174 seconds (almost 3 minutes)
• 16-bit / 48 kHz with 32-bit floating-point internal processing, 1.3 ms software latency
• Mono-in, stereo-out operation
• 18 HP Eurorack module

• 18 HP Eurorack format module
• Maximum Depth: 0.98" (25mm)
• Includes power ribbon cable with 10- to 16-pin Eurorack power headers
• Power consumption: +12V: 125mA, -12V: 32mA

Related Questions and Answers

Q: 1. I have a Canon EOS 6D. I want a wireless intervalometer to do time-lapse, but want the ability to expand into external triggers in the future. If I buy a Captur Pro, will a Receiver Module do this or do I need the Transmitter/Receiver set? Or if I buy a Captur Timer for Canon now, would the Receiver part of it work with the Pro if I bought a Pro in the future? I dont quite understand how the Pro interfaces with the camera.Thanks

A: The needs for you are the receiver the pro module and the cable set. http://www.hahnel.ie/irish-shop/captur_cable_pack_for_canon/http://www.hahnel.ie/irish-shop/captur_canon_receiver/http://www.hahnel.ie/irish-shop/captur_module_pro/if you purchase the captur for canon or the timer kit for canon all pieces are needed to expand using the pro module.

Q: 2. I need to freeze action (mountain bikers) in daylight using the sun as backlight and the flash to fill the shadows. From what I have been reading, this will only work at full power, which isn't necessarily an issue, since I'll be out doors I can move the light further or closer to my subject. Is this the best solution for my canon 6D (I know it's not the best for sports but it's what I've got) and pcbuf einstein combo? Right now, it's the cheapest option, besides buying a mirrorless or one of those expensive profoto all in one dealys.

A: Good question, the Einstein will certainly freeze the action at full power under strobe only, but if your only using it to fill in shadows then I doubt it will work as the maximum sync speed is pretty much limited to 1/250th they say 1/400th but i've never had any luck with that. And if your just filling in the shadows you will get too much motion if the bike is at spped.

Q: 3. I have Olympus OMD EM1 mark 2 and 3. What cable would I need?

A: You will need a 2.5 sub mini cable, click the link below to view; https://bhpho.to/314utnp

Q: 4. can the Captur Pro be connected by cable directly to Nikon D810 with no other equipment required to capture sound?

A: yes this can be hooked up to a camera directly through the correct cable. the sound triggering will work through the captur pro module.

Q: 5. Will this work with the Nikon D5000?

A: yes

Q: 6. Is it possible to mount this via 1/4-20" instead of the cold shoe?

A: Yes, beneath the cold shoe of the edelkrone Power Module (V-Mount) reveals a 1/4"-20 receiving point.

Q: 7. If I need to trigger Canon 5Ds remotely with Captur Pro Module, do I need to add both Captur Receiver and Transmitter Modules or Captur Receiver alone will be enough?

A: Yes you will need both the Capture Pro module and 1 (or more) receivers. The two parts of the Capture Pro module are A) the intervalometer / transmitter and b) the Infra Red transmitter device to trigger (A). You'll need at least one receiver to mount on / near you camera, PLUS a trigger cable to connect between the receiver and the camera. The receiver only has a hot shoe on the top side to driver the e-flash. You can add additional receivers/ e-flashes for more complicated lighting setups. Hope this helps.

Q: 8. is it compatible with V5 long ?

A: The edelkrone Slide Module v2 is compatible with the edelkrone SliderPlus V5.

Q: 9. Is the Capture Pro Module basically a transmitter?If I understand this product right, I can wirelessly use the Pro Module to trigger speed lights with the addition of a Receiver Module with any of the four sensors? Is it also possible to trigger a camera with just the Pro Module and a Receiver Module?Last question, what would the Transmitter Module be used for for from this link, https://a href= http://www.bhphotovideo.com/c/product/1140337-REG/hahnel_hl_captur_n_capture_wireless_shutter_flash_trigger.html target= _blank www.bhphotovideo.com/c/product/1140337-REG/hahnel_hl_captur_n_capture_wireless_shutter_flash_trigger.html/a , is this something I would need to use the Pro Module?

A: from the link provided, the pro module would replace the transmitter, allowing you to trigger from the methods the pro module provides.

Q: 10. has anyone tried this for fireworks or lightning? Also, to use this wireless on a nikon dslr, what other product(s) do i need? Thanks

A: Only used the laser to capture hummingbirds. Having a second tripod or guerrilla pod helps when you setup laser or infrared beams