Add accessories and handles to your ARRI ALEXA 35 cinema camera with this Front Top Plate from Wooden Camera. The plate mounts onto the top front of the ALEXA 35 and provides mounting points for accessories such as the LCS-1 handle, an Ultra handle, a rod block, extension arms, a monitor mount, or an EVF. It can be extended with the separately available middle and rear top plates.

Mount Accessories on Top of ALEXA 35    Front, Middle, and Rear Top Plate System    Front and Upper Dual Rod Clamps    Antenna Guard Color Kit

Related Questions and Answers

Q: 1. How can you mount this to a 15mm rod setup?

A: Hi Michel. To mount this battery plate to 15mm rods, you would first need to attach it to our Battery Slide (a href= https://www.woodencamera.com/battery-slide-p/156600.htm target= _blank https://www.woodencamera.com/battery-slide-p/156600.htm/a). From there, you can install our Rod Clamp (15mm LW) (a href= https://www.woodencamera.com/rod-clamp-15mm-lw-p/150200.htm target= _blank https://www.woodencamera.com/rod-clamp-15mm-lw-p/150200.htm/a), which will allow you to slide the configuration onto 15mm rods. You can also consider attaching the battery plate to our Battery Swing (a href= https://www.woodencamera.com/battery-swing-p/245700.htm target= _blank https://www.woodencamera.com/battery-swing-p/245700.htm/a), which has a rod clamp pre-installed.

Q: 2. Will the V mount version be able to mount to this: https://www.bhphotovideo.com/c/product/1525898-REG/camvate_c2166_cheese_plate_for_anton.html/qa ? And also, where can i buy the additional 15mm rod clamp for the cheese plate?

A: Yes this can be combined with third party cheese plates such as the Camvate. we sell many 15mm rod clamps for cheese plates however you may want to consider getting a cheese plate that already comes with the rod clamp such as the CAMVATE Multipurpose Cheese-Style Mounting Plate with 15mm Rod Block (Black Levers) B&H # CAC1523 MFR # C1523

Q: 3. Could some sort of pins be installed on bottom of plate?

A: The Wooden Camera 280100 Arca Swill plate has Arri Style mounts that would work with Arri mounts with anti rotation pins. However, Wooden does not offer a solution to add a Arca swiss style pin to this plate.

Q: 4. Can this be used with the SMALLRIG Field Monitor Holder Mount with Quick Release NATO Clamp - 2100? https://www.bhphotovideo.com/c/product/1570301-REG/smallrig_2100b_dslr_monitor_holder_with.html

A: To attach the handle, you need a NATO rail. SmallRig Quick Release NATO Rail (1.6) BH #SM1409 • MFR #1409

Q: 5. Would this work to raise the 8sinn top plate enough to clear the revolva adapter?

A: Yes, the Wooden Camera Revolva Riser for RED KOMODO Top Mount Kits is designed for kits to use KipperTie Revolva RF/PL adapter.

Q: 6. Hi, does this work with a C100 mark 2? the viewfinder is bigger than the mark 1. thanks

A: Yes

Q: 7. any fuse between the v-mount plate and A7s?

A: yes it does have a fuse.

Q: 8. Will this be able to connect to an Arri Alexa Classic EV camera?

A: The Wooden Camera Pro V-Mount Battery Plate with 3 x D-Taps can be made to power most any camera including the Arri Alexa Classic EV. We recommend you contact the Studio at B&H for further assistance.

Q: 9. will this work on the a7III camera?

A: This device is for cameras like the a7R II that take the Sony NP-FW50 Lithium-Ion Rechargeable Battery (1020mAh) B&H # SONPFW50. It is a very small battery. That is why it was it was replace by the larger Sony NP-FZ100 Rechargeable Lithium-Ion Battery (2280mAh) B&H # SONPFZ100. This is the battery the a7 III uses. Since it is larger, the Wooden Camera V-Mount Plate for Sony A7 and Alpha Cameras B&H # WO181200 will not work.

Q: 10. Would this also work on the Sony FX6? I know Wooden Camera has one that is more tailor-made for the FX6 but I would like something I could use on both cameras until I'm able to afford a separate baseplate for the FX6. Thank you!

A: Yes. The following base plate would adapt nicely to you unit.