With this convenient DisplayPort Male to HDMI Female Active Adapter Cable from Rocstor, you can connect your DisplayPort 1.2 host device to an HDMI display using a separately purchased cable. The female HDMI 2.0 port supports up to 3840 x 2160 resolution UHD 4K displays at 60 Hz.

Supporting an 18 Gb/s throughput, this portable active adapter cable provides crisp, clear visuals while watching movies, playing games, and editing videos. It is also designed to work with most devices without requiring any additional software drivers.

DisplayPort 1.2 Male Host Connection    1 x HDMI 2.0 Female Port    Supports Up to 3840 x 2160 at 60 Hz    Active Signal    Plug & Play

Related Questions and Answers

Q: 1. Sanken COS-11D Omni Lavalier Mic With a Sennheiser 3.5 EW connector work properly with this adapter please?

A: My previous answer may be inaccurate. Some COS-11D microphones are 48V Phantom and some are +3V to +10V. You will need to determine the power requirements of your microphone. The VXLR Plus provides 5 Volts.

Q: 2. Would it work for SmartLav+ to Zoom H6 XLR inputs?

A: Yes it will but you will need to get an adapter for your SmartLav as the connector on the SmartLav is a TRRS. In order for you to use the XLR Power Converter you will need an adapter to change the lav connector from TRRS to TRS. This is the B&H part number for the adapter B&H#ROSC3. Once your TRRS becomes a TRS them you can use the XLR power converter with the H6.

Q: 3. Will this let me connect a Rode Wireless Go receiver to the Rodecaster Pro?

A: No. You should use this one: Rode VXLR - Mono Mini-Jack to XLR Converter BH #ROVXLR: https://bhpho.to/398Q5Rk

Q: 4. Can I use this with a Xlr splitter? I want to split a Lav mic into two inputs.

A: This would not be a recommended practice.

Q: 5. Will this work with the Tram TR50?

A: Hello Stan, I show the TR50 as a XLR connection and therefore it would not. If there is a TR50 available with a 3.5mm TRS connector then yes, this will work for you.

Q: 6. My guess is that you can’t, but is it possible to only buy the phantom power converter?

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter adapts an XLR input with phantom power to a 3.5mm input with plugin power. There is no consumer device that does this without any connectors, although some type of OEM circuit may be available from electronics suppliers if you are working on a custom build.

Q: 7. will it work with takstar sgc-598?

A: That adapter will work for the Takstar SGC-598 microphone, to connect to an XLR input. Since that Takstar mic is battery powered, the less costly ROVXLR adapter would also work: https://bhpho.to/3AOKIE9

Q: 8. Will the 24 cable work with the 7 Red Touchscreen LCD? 36 cables DO NOT work with the 7 LCD (they do work with the 4.7 ).

A: Hi Andrew. Yes, the 24 cable is compatible with the 7 DSMC2 monitor.

Q: 9. Can this allow me to use a RODE videomicGO on a SONY HXR-NX100? The Sony only has XLR inputs.

A: It should. I use it on all my cameras that have XLR inputs and it works great.

Q: 10. Is this adapter fully compatible with Sennheiser ME2 lapel mics?

A: Yes, it works with the ME2. The VXLR-Plus is the perfect alternative to going wireless. So I nstead of connecting the ME2 to the G3 wireless transmitter, simply connect your ME2 (or most other 3.5mm lapels) to the Rode VXLR-Plus and you have a hard-wired connection. Just make sure that the device you are connecting the VXLR-Plus to (i.e. your camera or recorder), has 48 volt phantom power enabled and you should be good to go.