Use this 65.6' Waterbird Power/Data Cable to deliver both power and communication to your compatible slider system. The cable features a female 4-pin XLR connector on one end and a male 4-pin XLR connector on the other. It can connect to Waterbird MS PRO, Swift, and XL slider systems to facilitate the exchange of power and control.

Delivers Power and Data    For Select MS Series Slider Systems    Female 4-Pin XLR to Male 4-Pin XLR    65.6' Total Length

Related Questions and Answers

Q: 1. What brand are the connectors on this cable? I have a cable that comes from Rode for my nt4 and it has black, no-name connectors, that seem to want to pull apart when you remove it from the mic. Concerning.

A: Rode has not specified a brand name for the XLR connectors. For another cable option with 5-pin XLR female to two 3-pin XLR male, you may want to consider the Remote Audio 5-Pin Stereo XLR Female to Dual XLR Male Y-Cable (B&H #RECAXSTE25) which is 25' long and uses Neutrik connectors with Mogami cable. The same Remote Audio cable is also available in 18" length (B&H #RECAXSTE). We also have the Sony 5-Pin to Dual 3-pin XLR Cable for ECM-680S (B&H #SO5P3PXSGC) which is 16" long and shows Neutrik connectors in the photo.

Q: 2. Is this a shielded cable?

A: Yes it is shielded.

Q: 3. Currently Have a Sony ECM-MS957 - Stereo Condenser Microphone with the 5 pin XLR Female outWill this Rode cable isolate 2 mono channels into the male XLRs?

A: Hi Robert, I use this cable with my AT BP4029 stereo microphone and plug the 2 male xlr into my zoom recorder. Each male XLR connector have the signal of each channel. My mic is also MS, so connector 1 carries the Mid, and connector 2 carries the Side channels. I hope this help you

Q: 4. Will this work with this schoeps cable? https://www.bhphotovideo.com/c/product/1513008-REG/schoeps_ak_2l_su_adapter_cable_2_lemo_to.html ?

A: Yes, this Rode NT4-DXLR Stereo 5-Pin XLR to Dual 3-Pin XLR Cable for NT-4 Fixed X/Y Condenser Microphone (10.3'), would work with the Schoeps Adapter Cable: 2-Lemo To XLR-5M for CCM_L Pair you have asked about.

Q: 5. How long is this cable?

A: Crackling with mini plugs is usually an issue of having Plug-In Power turned on in the recorder. The NT4 mike does not run on Plug-In Power...when you want to connect it with a mini cable you need to power the mike with an internal nine-volt battery. So turn off Plug-In Power on the recorder. You'll get better battery life on your recorder as well! (An alkaline nine volt battery will run the NT4 for about 400 hours according to the Rode site.)

Q: 6. will this work with the blue yeti pro xlr connection? would like to hook up to a mixer

A: The Yeti Pro is wired standard for 5 pin stereo XLR cables, and should work with most third party 5pin to dual 3 pin XLR cables.

Q: 7. Is this what I need to connect my Azden SGM 1X condenser mic to my sony HDR-CX900 camera 3.5 mm mic input?

A: This is a specialty cable designed for a 5 pin stereo XLR connection. Use this: Kopul LMT100 - Low to High Impedance Matching Transformer (1.5') B&H # KOLMT100

Q: 8. Is this the correct cable to connect a Canon 6D to the Vello FreeWave Plus II receiver?

A: Yes, The Vello 2.5mm Remote Shutter Release Cable II for Canon 3-Pin Camera will work with the Vello FreeWave.

Q: 9. Does this work with blx4r receivers ?

A: Yes, the Shure PS124 Power Supply With Non-Locking Power Connectors can be used to power four BLX4R receivers. I contacted Shure to confirm compatibility. This will work with multiple BLX4R receivers, If you need a replacement power supply for a single BLX4R, the Shure PS24US Power Supply for Select Wireless Receivers (B&H # SHPS24US) is the correct model. You may also want to consider using one master antenna for four BLX4R receivers with the Shure UA844+SWB/LC Wideband Antenna Distribution System & No Antenna Cables - 470 to 960 MHz (B&H # SHUA844SWBLP) which also includes a the daisy chain cable with four DC power feeds for the receivers.

Q: 10. is this the cable I would need for my canon 60D?

A: No. The Canon 60D uses the sub-mini connection. The appropriate cable you need is here: https://bhpho.to/3ss6P1x