Take the strain of your camera's weight off your shoulders and arms and transfer it to your back with the Starter Female Flowline Body Support Rig from FLYCAM. Ideal for handheld camerawork, this support vest is compatible with gimbals and camera rigs from 6.6 to 16.5 lb, and it is designed to fit small-, medium-, or large-sized female body forms.

A suspension line with a maximum length of 60" threads through a top bar measuring 22" and is capable of rotating 180° to execute pivoting and tracking shots with ease. The suspension line's additional point of contact reduces vibrations to keep your handheld shots steady and smooth. Its tension can be adjusted with the knob positioned on the back of the vest, and the camera's position along the top bar can be adjusted forward or backward for better balance. The apparatus collapses to 23.6" to fit in an included carrying case for portability.

Reduces Strain on Arms, Neck & Shoulders    Vest Designed for the Female Body Form    6.6 to 16 lb Load Capacity    22" Top Bar with 180° Rotation    Adjustable Line Length, 22" Maximum    Carrying Case

Camera hook compatible with most camera and gimbal setups

Vest designed for small-, medium-, or large-sized female body forms

6.6 to 16.5 lb load capacity

Tightening knobs to adjust line length and camera positioning along the top bar

Line extends to 60" fully stretched

Top bar rotates 180°

Adjustable waist strap made of breathable material

Related Questions and Answers

Q: 1. Is the placid arm already affixed to the vest & system. I'm asking so I wouldn't have to do it myself

A: The FLYCAM Flowline Starter Support Vest and Spring Arm is simple process to assemble and you would need to mount the Placid arm. Please see this manual for installation. https://bit.ly/3D9ONVV

Q: 2. Height Adjustment up and down

A: The line of the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will allow you to lower the payload you are working with to ground level. The line is tensioned and will retract.

Q: 3. Hello! My camera is a Blackmajick 6G2 , my cage for my camera is TILTA cage handle I want to buy this support bar and I would like to know if the can fit very well

A: Yes, the FLYCAM Flowline's lockable camera hook can attach to any handle and will fit on your setup.

Q: 4. difference with this https://www.bhphotovideo.com/c/product/1483097-REG/flycam_flcm_fln_mstr_flowline_master_stabilizing_body.html the arm is more short?

A: Yes, the major difference is that this item, the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) has a 13" (33cm) top bar with a 5" (12.7cm) extension whereas the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals (B&H# FLCMFLNMSTR) has a 17" (43cm) top bar with a 5.5" (14cm) extension.

Q: 5. Hi! is the placid arm included in this kit for 797? thanks!

A: Oh yes, the FLYCAM Flowline Starter Support Vest and Spring Arm for Camera and Gimbals (B&H# FLCMFLNPA01) comes with the FLYCAM Flowline Placid Two-Axis Spring Arm (B&H# FLCMFLNPLA) and also with the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation (B&H# FLBFLCMFLN01).

Q: 6. Belt or waist size is about 34" inches minimum at stays in specs. My waist is about 31" inches. Would I be losing a tight fit?

A: Yes, The minimum waist size is 34" for the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals the fit would be very loose with your waist size.

Q: 7. Does it support RS 3 Pro with Blackmajick 6KG2 and TILTA cage ??

A: Yes, the FLYCAM Flowline Starter Support Vest and Spring Arm can support an RS3 Pro, Blackmagic 6KG2, and Tilta Cage.

Q: 8. is it suitable to use it with a camera setup less than 6.6 Ib ?

A: No, the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will not work effectively with cameras/camera rigs that weight less than 6.6lbs.

Q: 9. Is it possible to lock the support arm so that I wouldn't be moving?

A: On this device the hook may be locked at the end of the support arm.

Q: 10. That's can fit for a Blackmagic 6K G2 with Tilta Cage ! Lens sigma and matebox tilta 4x4?

A: Yes the Flycam Flowline Master Stabilizing Support Vest for Camera Gimbals would be appropriate for a Blackmagic 6K G2 Camera rig if the entire rig weighs between 8.82 to 26.46 lb / 4 to 12 kg. It would also need a sturdy top handle on the rig, for the Flowline clamp to connect to.