A compact, lightweight design and a wide field of view make the 1-8x24 Vantage 30 WA Riflescope from Hawke Optics a good choice for general hunting. Eleven layers of antireflection coating on all lens surfaces deliver a sharp image with ample contrast. The scope features a single-piece 30mm maintube with 210 MOA of elevation and windage adjustment at 1/2 MOA per click for long-distance shots. The L4A Fiber Dot reticle in the second focal plane gives a clean and uninterrupted view of your target, with an extra-bright red dot in the center. The scope is set to be parallax-free at 100 yards, and the sealed aluminum housing is purged with nitrogen to be fog and water resistant.

Illuminated Reticle, 2nd Focal Plane    WA: Wide-Angle Optical System    3mm Exit Pupil at Maximum Magnification    11-Layer Fully Multicoated Optics    Nitrogen-Purged, Fog & Waterproof    1/2 MOA Impact Point Correction    210 MOA Elevation & Windage Range

• Zoom range 1-8x 
• 24mm objective lens
• Fully multicoated optics with 11 layers of antireflective coatings
• Wide-angle optical system (WA): 120.4-15.1' field of view at 100 yards
  • 1/2 MOA impact point correction
  • 210 MOA windage and elevation adjustment range
  • Parallax-free to 100 yards
  • Capped turret caps prevent accidental adjustment
  • Fast-focus eyepiece
  • Knurled Posi-Grip zoom ring with removable lever
  • 3.5"-long eye relief
    • 30mm one-piece maintube
    • Lightweight and durable aluminum-alloy housing
    • Scratch-resistant anodizing coating
    • Nitrogen filled for fog and waterproof performance
    • Rated for use on most calibers and recoil resistant
    • Two lens covers included
      • Second focal plane
      • Red and green illumination with five levels of brightness
      • German #4 style
      • Three posts
      • Thin crosshair with extra-bright red target dot

    Related Questions and Answers

    Q: 1. what is the folded diameter of this tripod?

    A: The RC-5570 Tripod in its folded position measures in diameter approximately 150 mm at the top, and approximately 65 mm at the bottom.

    Q: 2. Where are the 6 Q&A?

    A: Below the recommended accessories, there are tabs, one of which says Q&A.

    Q: 3. Will this work with the Arca-Swiss Monoball P0 with Panning System ? or is the tripod base too big ?

    A: It will work, you will probably have a 1/2" extra around the base. Typically tripods without center columns have similar size discs or flat plates. If you wanted a smaller base for the head, you can look at tripods with center columns.

    Q: 4. Can I mount my ball head directly to the tripod or do I need to purchase a center column? Thanks

    A: Yes. You will mount the head directly to the apex with the 3/8"-16 mounting screw.

    Q: 5. Where is this Robus tripod made? Also is it waterproof construction... can it be used in streams and water?

    A: Country of origin China and this is Carbon Fiber Tripod You can use it in any water (salt or streams ) carbon fiber does not rust

    Q: 6. Are the twist lock knobs metal or plastic ?

    A: The twist lock knobs on the Oben GH-30 Gimbal Head are made of a hardened plastic.

    Q: 7. what ball head would you or anyone recommend to go with this ?

    A: The Benro B3 Triple Action Ball Head, B&H # BEB3 is a suitable ball head for this tripod.

    Q: 8. How is this tripod compared to the LeoFoto LN-364C? Thank you.

    A: Both have similar specifications on paper. In terms of differences, the Leofoto LN-364C is just a tad bit lighter in weight and shorter in folded length. The Robus 8860 has a 10-year warranty compared to the Leofoto's 2-year limited. The Robus also comes with more feet accessories than the Leofoto.

    Q: 9. Would this be a good tripod to use with the Edelkrone JibONE?

    A: This is an excellent choice for the Eldelkrone JibOne. You should definitely weight it down with something like a sandbag or a bag filled with heavy gear with the provided hook.

    Q: 10. Will my Benro G2 gimbal head attach to this tripod?

    A: The Robus RC-5570 Vantage Series 3 Carbon Fiber Tripod has a 3/8"-16 head mount screw. It is compatible with all Benro heads including the GH2 Gimbal Head.