The lightweight, compact HAZ31 Strain Wave Alt-Az Mount from iOptron has a payload capability of 31 lb, without needing a cumbersome counterweight or shaft. HAZ mounts will support a large variety of instruments that require flexibility for outreach programs and satellite tracking. The multi-position saddle, which can be placed on top or to the side, uniquely sets up the HAZ31 to accommodate binoculars. Just turn the mount on, and it will calibrate itself and GoTo the first target utilizing iOptron's time-tested "Level and Go" technology.

Utilizing strain wave gear technology for both RA and DEC movement, the HAZ31 delivers high weight-to-payload efficiency. Its black anodized all-metal CNC-machined body is not only appealing to the eye, but it's also a rugged platform that will perform at the highest level for many years to come. Unique features such as an electronic friction break and power-down memory allow the mount to safely stop and resume a GoTo slew or continue tracking even after an abrupt power loss (No need to realign and start from the beginning).

A HAZ31 mount can be controlled by a computer, either via ASCOM/Commander for a Windows PC or a third-party INDI driver for macOS software; a smartphone/tablet via iOptron Commander Lite or an App like SkySafari; or a Raspberry Pi device via INDI driver.

Motorized Computer-Controlled Mount    Payload: 31 lb    Go2Nova Hand Controller    212,000+ Object Database

• Advanced strain wave gear system technology
• Payload capacity of 31 lb
• CNC machined
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• Go2Nova hand controller with 212,000 object database
• Dual saddle (Vixen and Losmandy-D styles)
• Level & Go technology
• Large binocular mounting
• Satellite tracking ready (with third-party software)
• Built-in zero position search and locator
• Power-down position and location memory
• Built-in Wi-Fi via the hand controller
• USB port for firmware upgrade and computer control

Related Questions and Answers

Q: 1. Can this mount be used for Meade ETX Astro Telescope Model M to set polar alignment?

A: Yes as long as your telescope tube has a dove tail rail.

Q: 2. What is the inside distance between yoke arms? I would be mounting an AT-72edii. Thanks!

A: Altazimuth head with handle. Cradle will hold TeleVue scopes up to the TV-85. Not for TV-101, Renaissance, or TV-102. Friction locks in altitude and azimuth allow user to adjust the mount drag for smoothest operation and for balancing the scope. Pre-drilled to accept optional TeleVue Sky Tour computer encoders. 1/4"-20 thread and 3/8" thread holes allow it to mount on any photo tripod legs (not recommended for mounting onto a photo tripod's pan head). The Tele-Pod can also be used with other brands of small refractors. However, the internal width between the vertical sides of the Tele-Pod yoke measures only 5.25", so the maximum width of the mounting rings of another brand of telescope must be smaller than this measurement. In addition, the buyer should keep in mind that the fore-and-aft mounting platform dimension of the yoke is limited and would require a user-supplied adapter plate to install dual mounting rings on the single 1/4"-20 hole available in the Tele-Pod yoke.

Q: 3. Is there any adapter to use this on an iOptron Tri-Pier?

A: The Sky-Watcher Wave 150i GoTo Strain Wave Mount cannot be used on an iOptron Tri-Pier.

Q: 4. Is there a procedure for aligning during daylight hours? I am interested in using this for solar observations.

A: There are no provisions in aiming the iOptron SkyHunter Portable AZ GoTo Mount BH #IO3700AZ • MFR #3700AZ during daylight hours.

Q: 5. Is this the same as the AZ-EQ6 GT Pro for sale on First Light Optics? Basically what I'm asking is this the newest version that has the upgraded motor controller and the USB port added? I don't see USB mentioned anywhere in your description even though it should be included as a new feature for the newest Alt AZ-EQ6 model.

A: For an improved and simplified connection, the AZ-EQ6 features a built-in USB-B port on its side panel. This allows for easy connection to a PC computer and control through the Sky-Watcher SynScan Pro application available for PC.

Q: 6. Is the Tele Vue TEC-1018 Eyepiece Caddy compatible with this mount?

A: Yes it is compatible.

Q: 7. Can I put a 20kg telescope on it without any problems ?

A: The Sky-Watcher AZ-EQ6 Alt-Az / Equatorial GoTo Mount with Tripod BH #SKAZEQ6 • MFR #S30330 will support a 20kg telescope. Be aware you will be at the maximum weight limit.

Q: 8. I am on Lat=1 degree, can can I do polar alignment with AZ-EQ6?

A: You would need to move 4 degrees North. It needs to be at 5 degrees up to 65. This also works -5 to -65, just not those 10 degrees in the middle or too far north.

Q: 9. Does this mount have slow motion controls?

A: The Tele Vue Encoder-Equipped Gibraltar HD4 Alt-Az Mount BH #TEG4E6023 • MFR #G4E-6023 has no slow-motion control.

Q: 10. I am new to this. please can you help me understand what is the difference between this go compared to the EQ6 one which is much cheaper?

A: The EQ6 is an EQ mount only but the AZ-EQ6 is both an EQ mount and an Alt Az mount. It can be reconfigured to a more basic alt-azimuth mount for fast observation sessions.