Controlling PTZ cameras over the web is made simple with the dvCloud Remote Device BB-1 Remote Controller from DataVideo. Add this BB-1 controller to your existing setup to control an additional 5 devices per BB-1 controller.

Remotely Operate IP Controllable Devices    One BB-1 Remote Controller    Simultaneous Control at Multiple Sites    Link up to 5 Devices with Each BB-1    Reduces Hurdles of Complex IP Setup

The BB-1 allows you to access almost any IP-enabled device over the public internet. The BB-1 is completely transparent, meaning you can access remote devices just as you would locally. BB-1 is powered by the dvCloud platform, so it does not require any network or firewall configuration.

Easily create a variety of remote workflows by the addition of camera controllers, switchers, workstations, encoders, decoders, teleprompters, and more.

A single BB-1 pair will allow control of up to five devices at each location. Each additional BB-1 will provide access to a further five devices. Devices can connect over the internet just as if they are on the same local network.

The BB-1 does not require any firewall or manual IP configuration, simply pair your BB-1 with your dvCloud account (required) and manage your shared devices anywhere, using our easy-to-use web interface. BB-1 automatically detects all available Datavideo devices, simply select the devices you want to share. BB-1 can provide remote access to devices connected to your existing network or create its own, the choice is yours.

Be confident your network is safe. All data sent between BB-1s is secured using 256-bit encryption. BB-1 can provide remote access to devices on an existing local network or create its own isolated network if required.

Many broadcasters have experienced pixelated video during live streaming, often due to unstable network environments caused by bandwidth volatility. Streaming RTMP over unreliable, low-bandwidth networks can cause issues. SRT is better than RTMP because it handles problematic networks more efficiently and solves data errors faster. As a result, your will experience a better stream, with less buffering and lower latency.

Related Questions and Answers

Q: 1. Is this all I would need to use an SB-5000 in radio mode off my D850?

A: Yes this is all that is needed to trigger the SB-5000 from your D850.

Q: 2. Does this have a program out on 1080P?

A: Yes, it can do 1080p on program out.

Q: 3. Will this support controlling a PTZOptics PTZ camera over IP?

A: Yes, the Datavideo RMC-2 Joystick Camera Controller should be able to control other camera brands that use VISCA over IP Protocol. PTZ Optics cameras will support this Protocol. However, we recommend using PTZOptics controllers with PTZOptics cameras because of their level of support if a setup problem does arise. PTZOptics PT-JOY-G4 IP/Serial Joystick Controller (4th Generation) BH #PTJOYG4 or PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller BH #PTSUPERJOYG1

Q: 4. Can this accept UHD 4k RAW output from a camera?

A: It cannot. This cannot process a RAW signal.

Q: 5. what PTZ cameras work with this controller?

A: This works with Datavideo cameras like the PTC-140, PTC-150 and PTZ-10T.

Q: 6. If you own two Avava 2 drones, can this switch between the two in a similar way with how the RC2 switches between drones?

A: Yes, the DJI FPV Remote Controller 3 can be bound to multiple drones and will provide you with the ability to switch between the drones.

Q: 7. what level of cloud service is needed to use the BB1? How is the cloud service purchased?

A: The Datavideo dvCloud Remote Device Control Kit with Two BB-1 Controllers uses the cloud subscriptions that found here. www.dvcloud.tv

Q: 8. Is the picture correct Or is the part number correct? It appears to be an "a" model in the picture but the description says "b" Thanks

A: I double checked and I don't see any issue with the picture or the part number. I also compared with the information on Nikon website and I did not find any discrepancy.

Q: 9. Will this work with DJI Mavic Air 2 ?

A: At the moment, the DJI RC 2 Remote Controller is only compatible with the DJI Air 3 drone. It is not compatible with the DJI Mavic Air 2.

Q: 10. Will this integrate with the hs 1600t mark 2 switcher. What would the workflow be?

A: The Datavideo HS-1600T MK II is a standalone switcher and the RMC-300A is a stand-alone Camera controller. Unfortunately, they cannot be connected together. The Datavideo HS-1600T MK II comes with a build in camera control panel that controls 3 Datavideo PTZ HDBaseT cameras.