Swap your batteries out without needing to switch off your camera using this KA-B30B B-Mount to B-Mount Hot Swap Plate from SWIT. The KA-B30B easily powers the ARRI ALEXA35 camera at 28.8V (22-33.6V), and when you remove the B-mount battery, the KA-A30B output regulates 28V to the camera for hot swapping.

The KA-B30B has 32Wh/3Ah battery cells inside and a 200W constant high load that can ensure two minutes for hot swapping with an LCD screen that displays countdown seconds when changing the battery. Once your battery is removed, a 120-second countdown begins to give you enough time to swap out the depleted battery with one that is fully charged, which then recharges the hot swap plate and resets the countdown to 120.

Works with ARRI ALEXA35    B-Mount Hot Swap Plate    2 x D-Tap Regulated 14V Outputs    2-Pin LEMO Regulated 14V Output    Aluminum CNC Unibody Housing

• 28V, 32Wh 3Ah battery cells inside
• 200W constant high load
• At least 2-minutes runtime
• 120-second countdown display
• Two D-Tap regulated 14V outputs
• 2-pin LEMO regulated 14V output
• USB 5V/2A power output
• 22 to 33.6V 8-pin input for power station hot swap
• Aluminum CNC unibody housing
• Multiple circuit protections

Related Questions and Answers

Q: 1. Will this item work with the new Anton Bauer Digital Batteries (90, 150, 190)?

A: The QR-HOTSWAP-GM can be used with any combination of Anton/Bauer DIONIC 90, DIONIC HC, DIONIC HCX or HyTRON 50 batteries ONLY. This is due to the batteries sizes and weights. Thus the new digital series of batteries will not work.

Q: 2. what is the difference between this battery and the S-8082A version?

A: The difference is the type of battery mount each battery has. The S-8082S has a V-Mount; the S-8082A has a Gold Mount. They are incompatible. Double check to make sure what mount you are using on your camera.

Q: 3. Does this have DTap port? And if so how many and where are they located?

A: The Anton/Bauer QR-HOTSWAP-GM Hot Swap Battery Adapter does not offer D-Tap ports.

Q: 4. Is this compatible with Alexa 35?

A: Yes, the Anton/Bauer Gold Mount Plus Hot Swap Shark Fin Bracket can be used on the ARRI ALEXA 35 Body & ARRI PL Mount Set (LBUS) when pairing the Anton/Bauer 26V Gold Mount + ARRI S35 Plate. See the link below: https://bhpho.to/3QdyAF0

Q: 5. Does this have swing out feet to prevent it from tipping over when batteries are being charged?

A: Yes, the SWIT 2-Channel Simultaneous Charger for V-Mount Batteries does have swing out feet to prevent it from toppling over when batteries are being charged.

Q: 6. is this product compatible with nikon d700?

A: Yes this product is compatible with the d700. It can be used on the top of the camera where that silver slider is.... this is called the shoe mount. Hope this helps.

Q: 7. will this mount work and communicate with Anton Bauer batteries?

A: Some customers have reported that the Core SWX Gold Mount Hot Swap/Shark Fin Battery Plate does work with Anton Bauer batteries, so we believe they are compatible.

Q: 8. Is it possible to charge from the V-mount charger via the adapter?

A: Not that we are aware of. This is meant to be used on cameras, not a charger.

Q: 9. Can this be controlled by any DMX output device or can it only be controlled by the DMX remote?

A: This unit can work with an DMX controller with a 5 pin DMX connection.

Q: 10. Has this adapter Ptap port?

A: Yes it does, this has a PowerTap Port on it.