The Ikelite 200DLM Underwater Housing for Canon EOS R7 Camera is designed for the most streamlined form factor possible and provides ergonomic access to all important camera functions at depths down to 200'. The 200DLM housing is approximately half the size and weight of housings for full-frame cameras like the Sony a7 IV or Canon EOS R5. A built-in Ikelite bulkhead and manual flash hot shoe allow attachment of an underwater strobe out of the box, plus expandability to TTL exposure with the optional DL5 DS Link TTL Converter.

Add an optional Vacuum Kit with a 1/2" valve to test your housing's waterproof seals prior to entering the water. A compatible lens port is required for waterproof operation (sold separately). For the correct port components for your lens, consult the port chart.

Depth Rating: 200'    Strobe Bulkhead with Manual Hot Shoe    Manual Flash Exposure, TTL Optional    Interchangeable DLM Lens Port System    Mechanical Controls    Access to All Essential Camera Functions

Ikelite's signature open-groove design suspends the rear O-ring in a natural position that is easier to maintain and more reliable than forcing the O-ring into a channel. Once the housing is closed you can see the O-ring form a solid, waterproof seal. Ikelite recommends adding the optional Vacuum Kit with 1/2" Valve #47012 to pull a vacuum on the housing and check for leaks prior to entering the water.

The specially formulated ABS-PC blend housing is highly durable, yet significantly lighter than aluminum. The light color keeps your camera cooler when shooting in warm, sunny environments.

Most popular zoom lenses and select focus rings can be engaged using simple gearing that puts adjustment right at your fingertips. Lens ports and zoom gears are sold separately. Refer to the appropriate port chart for compatibility information.

Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

Related Questions and Answers

Q: 1. Are there any additional pins or screws that help with securing the cage to the camera?

A: No, the only mounting point on the 8Sinn Cage for Canon EOS R7 is on the tripod mount of the Canon EOS R7. There is a lip on the front of the cage to keep the camera from twisting.

Q: 2. Is it works with new rx100 M7?

A: Yes.

Q: 3. Can you mount the cage directly onto the RS2? Please only reply if you can personally confirm this. I don't see an opening on the side where the pin slides through the plate.

A: The bottom of the Smallrig cage is designed to attach to DJI RS gimbals. The RS2 has an Arca swiss quick release that the cage is compatible with. Integrated Arca-Type Base

Q: 4. Can this housing be used with the TG-7?

A: The Ikelite Underwater Housing with FCON-T02 Dome for Olympus Tough TG-6 is compatible with the OM SYSTEM Tough TG-7 Digital Camera.

Q: 5. Does this work with the RX100 shooting grip attached?

A: No, it will not. Any additional camera grips would have to be removed before inserting the Sony Cyber-shot DSC-RX100 VI Digital Camera inside the Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI. There is not enough clearance to use a grip with the Sony Cyber-shot DSC-RX100 VI Digital Camera, and attempting to use one would prevent the housing from closing properly for underwater usage and may prevent the buttons on the housing from properly aligning with the buttons on the camera.

Q: 6. Can this cage be used as an "L" bracket? (Arca swiss on either of the ends?)

A: No, the SmallRig "Black Mamba" Camera Cage for Canon EOS R7 doesn't have Arca-Type plates on either of the sides. You can however use the 1/4"-20 threads on the sides to mount the camera vertically by screwing your tripod's camera plate into the threads.

Q: 7. does the cage partially block access to the hot shoe and prevent mounting a speedlite?

A: The SmallRig "Black Mamba" Camera Cage for Canon EOS R7 does not block the hot shoe whatsoever, which is clearly visible in the image of the cage.

Q: 8. Hi, this fit to the canon 90D?

A: No, the Sunwayfoto Custom L-Bracket for Canon EOS R7 is strictly for that camera. The Canon EOS 90D DSLR Camera would use the Sunwayfoto Custom L-Bracket for Canon EOS 90D, BH #SUCLBCE90D (https://bhpho.to/3lfM1dh).

Q: 9. Realizing there is another housing available for the TG-6 without the dome, I want to know whether this housing can be used without the FCON-T02 installed on the camera. And is the dome removable or permanently attached?

A: You could use the Ikelite Underwater Housing with FCON-T02 Dome for Olympus Tough TG-6 without the Olympus FCON-T02 Fisheye Converter Lens installed on the camera. The dome will correct the 25% size distortion that happens underwater. So the camera's built-in lens will have the same angle of view underwater as it has on land. The dome can be removed from the housing. Keep in mind the dome is sold separately, but Ikelite only sells a flat port with the housing.

Q: 10. I have a 5-D mark 3. I want to buy the 200-200 foot housing. I need strobes and accessories that are user friendly. I want to do mostly macro and wide angle pictures. What do you recommend for lenses and strobes for a new underwater DLSR user. I have only had point and shoot cameras prior? Thanks Ken

A: The Ikelite DS-51 Underwater Substrobe Head is a good user friendly strobe. You will need an arm, sync cord and Ikelite CT1K TTL Circuitry and the Hot Shoe Kit to use the strobe with the Ikelite 71702 Underwater Housing. Here is what you will need: Ikelite CT1K TTL Circuitry and Hot Shoe Kit https://www.bhphotovideo.com/c/product/1299520-REG/ikelite_46070_ct1k_canon_ttl_kit.html Ikelite Wide-Angle 1" Ball Arm https://www.bhphotovideo.com/c/product/1276816-REG/ikelite_4080_06_wide_angle_ball_arm.html Ikelite Sync Cord Ikelite Strobe to Ikelite Bulkhead for one strobe https://www.bhphotovideo.com/c/product/1437635-REG/ikelite_45151_sync_cord_ikelite_strobe.html If using two strobes get the Ikelite Sync Cord Two Ikelite Strobes to Ikelite Bulkhead https://www.bhphotovideo.com/c/product/1437427-REG/ikelite_45152_sync_cord_two_ikelite.html If you have more underwater questions send an email to uw@bhphoto.com. For more underwater imaging information you could see our presentation on getting started in underwater photography: https://www.youtube.com/watch?v=GwnP7PYEpUM&feature=youtu.be