Integrating the cnMatrix EX1010-P 8-Port PoE+ Compliant Gigabit Managed Switch from Cambium into your network allows you to quickly expand your business's network capacity. This entry level switch features eight Gigabit speed Ethernet ports, each supporting up to 30W with a 75W budget to operate access points, IP security cameras, VoIP phones, and other powered devices. Two SFP slots are also available for up to Gigabit fiber uplink connections.

This network switch may be installed into a 1 RU space with the included rackmount kit. Please be aware that a power cable is not included.

8 x Gigabit Ethernet PoE+ Ports    2 x Gigabit SFP Slots    20 Gb/s Switching Capacity    120 Mpps Forwarding Rate    Rack Mountable Design    75W Power Budget    Layer 2 & Layer 3 Features    Passive Cooling    cnMaestro & XMS Management

This switch supports cloud-based and on premise management through the cnMaestro or XMS platforms.

With a 20 Gb/s switching capacity and 120 Mpps forwarding rate, the cnMatrix EX1010-P switch provides fast and smooth data transfers.

Comprehensive Layer 2 and Layer 3 support provides a wide range of features and enhanced security.

Zero-touch deployment simplifies installation. Policy Based Automation eliminates manual configuration during adds, moves, and changes of network devices.

With passive cooling, this switch produces almost no noise.

Related Questions and Answers

Q: 1. Can this device be used to replace the Nokia Gpon terminal that was provided by my ISP?

A: Not knowing the specs and combability of your Nokia GPON hard to confirm, but this device will let you share a high-speed Fiber connection with Gigabit-enabled devices. This device does have a return policy of 30 day if it does not work for you.

Q: 2. Does it support hardware transcoding?

A: According to QNAP, "a compatible NVIDIA graphics card must be installed in your NAS to enable hardware transcoding." You can find more details, as well as the official QNAP compatibility list for hardware acceleration, here: https://bhpho.to/47lbGD5

Q: 3. I dont understant how to hook it up to my. Pc with me flight yoke budle?

A: The Logitech G Flight Switch Panel connects to a PC via USB connection.

Q: 4. Will the Unify door bell also be able to be shown in the multi view?

A: Yes, since the doorbell is part of UniFi protect.

Q: 5. how do i get setup link?

A: Connect via USB and consult the included manual for a complete or customized set-up. Make sure you have downloaded the correct driveres from Logitech's website for this product. They will also offer a .pdf of the set-up manual.

Q: 6. Does this device has WiFi also?

A: No, unfortunately this model does not have Wi-Fi capabilities.

Q: 7. How many of the 8 drives are lost to Parity etc when set to Raid 5? I'm wondering, how many are available for User Data?

A: When using the QNAP TS-873A 8-Bay NAS Enclosure with QSW-1105-5T Network Switch (BH #QNTS873ASW5T) in a RAID 5 setup, only one of the 8 drives would be used for parity.

Q: 8. What is the recommended/compatible RAM for an upgrade?

A: The QNAP TS-473A 4-Bay NAS Enclosure with QSW-1105-5T Network Switch can support up to a Maximum of 64GB of RAM. We recommend using QNAP SODIMM DDR4 RAM, such as the QNAP 16GB DDR4 Ram 2666 MHz SO-DIMM Memory Module (K1 Version)(BH #QN16GK1S2666).

Q: 9. How many PCIE expansion slots does it have available?

A: The QNAP TS-873A 8-Bay NAS Enclosure with QSW-1105-5T Network Switch, BH # QNTS873ASW5T, has two PCIe slots available.

Q: 10. how many simultaneous view ports can be on the same network? I have two working fine but is there a limit?

A: There is no limit published.