Power your Sony PMW-EX1 or EX3 camera via a D-Tap battery with this D-Tap to Barrel Connector Power Cable from Hawk-Woods. This cable features a D-Tap connector on one end and a DC barrel connector on the other end, and it passes unregulated voltage from a D-Tap battery to the camera. The cable measures 17.7" in length.

Power Sony EX1/EX3 via Battery    Male D-Tap Connector on One End    DC Barrel EX Right-Angle Connector    Cable Measures 17.7" in Length

Related Questions and Answers

Q: 1. Will this allow me to power anything that has a DC barrel input with my v-mount batts or will it only specifically work with BlackMagic cameras listed?

A: The cable is for all devices with right input barrel and battery with D-tap output port.

Q: 2. Will this work with a Canon XF400?

A: The LanParte D-Tap to Barrel 8.4V Regulated Constant Power Cable is not listed as compatible on the Canon XF400. And LanParte does not list the barrel size.

Q: 3. what size barrel is this?

A: the barrel appears to be 2.5mm but the manufacturer has not provided specific dimensions

Q: 4. Will this work with the input on the FS7? I have a Lanparte battery pinch already, just need to connect it to the back of my FS7. Thanks!

A: This cable is designed for the Blackmagic Cameras, it will not work with the FS7. However we do have a D-Tap to DC Power Cable for the FS7 from Wooden Camera. This will allow you to use one of your D-Tap connections on the Lanparte Battery Pinch with the Sony FS7.

Q: 5. is this compatible with the BGH1 camera?

A: As long as the DC barrel cable connector fits into the camera, then it will work.

Q: 6. Can I power a 5 volt device using this?

A: Double check if your device can take up to 12 V, if it does then you can go ahead and use it!

Q: 7. Will my Sony FS7M2 camera spectacularly explode (or even fizzle) if I use this cable straight out of a battery... eg. a large 190W V-Lock that starts at around 16V?

A: This cable is made for V-lock batteries output, They usually output 16.8VYour FS7 will have no issues and will work fine with this cable.

Q: 8. this is listed as an accessory to SmallHD Indie 7 monitor. Can you confirm this connector fits the barrel input on that monitor?

A: Yes, the SHAPE D-Tap to 2.1mm Barrel Power Cable is compatible with the SmallHD INDIE 7 Touchscreen On-Camera Monitor.

Q: 9. Can I power the c70 with this cable and with an internal bp-a30 simultaneously? Will the camera draw power from this cable first

A: Yes, normally the power provided by the Wooden Camera D-Tap to DC Barrel Power Cable for Canon C70 would be used first if a battery was installed in the camera. Once removed the battery in the camera would take over.

Q: 10. What is the outer diameter of the barrel connector? in mm please.

A: The Shape Coiled D-Tap to DC Barrel Cable size is 5.5 x 2.1 mm.