The BC-126 Ball Head from Oben is a durable aluminum ball head that features an Arca-type compatible quick-release system. It has a large locking knob with a tension control screw to give you maximum control of the ball, and a separate knob for the 360° panning movement.

The BC-126's multiple knobs enable higher-precision adjustments to the head than are possible with single-lever heads. Taking panoramic photos is simple, for instance, because you can pan a specific number of degrees while keeping the head's tilt position locked. In fact, the BC-126 features degree markings around its circumference to aid in that task. A notch in the ball head allows you to quickly change between portrait and landscape orientation.

The included quick-release plate attaches to your camera via its standard 1/4"-20 screw, and is secured in place with an Arca-type clamp. A locking knob controls the opening and closing of the aluminum clamp simply and reliably. Two safety screws on the bottom of the plate help prevent your camera from accidentally being released when adjusting the plate fore and aft. One bubble level on the clamp, and another on the locking knob, both ensure that your camera will be level with the horizon.

26.4 lb Load Capacity    Arca-Type Compatible Quick Release    Tension Control    Separate Panning Lock    Bubble Levels

Related Questions and Answers

Q: 1. what is the tension control?

A: 3 knobs - big one controls tilt up down sideways, smaller one on the bottom allows turning side to side and top one is to secure base plate. All work very well.

Q: 2. is it compatible with the manfrotto befree tripod?

A: Yes, the BE-126 Ball Head is compatible with the Manfrotto BeFree tripod as they both use a standard 3/8” thread.

Q: 3. Is the QR planet an Arca-Swiss plate? Can you provide the size?

A: The QR plate for the Oben BA-126 Single Lever Ball Head is a specific Oben plate measuring about 50mm wide. We suggest Oben RP-20 Quick Release Plate for best compatibility. https://bhpho.to/3JIruaR

Q: 4. I was gifted the BC-166 (used) only to find it not containing a QR-40 plate, will it work with QR-30 plates also because I have not been able to find any replacements.

A: Yes the QR-30 plate will work with this ball head.

Q: 5. How different is this compared to Sirui K-40X Ball Head from design perspective?

A: The Oben BC-166 Ball Head has the same basic design as the Sirui K-40X Ball Head, but with fewer positive reviews and a slightly lower load capacity.

Q: 6. My question concerns an Oben BB-0 ball head which I purchased back in July from B&H.If the head is not tightened down all the way in the horizontal axis the camera can be giggled (for lack of a better word). Is this normal or is there a problem?

A: Yes that is normal. You can tighten the tension knob. But for it to be fully secure you need to tighten the main knob.

Q: 7. Can this head be attached to a Small rig Selection T200 tripod?

A: Yes, the Oben BA-126 Single Lever Ball Head can mount on the SmallRig Selection T200 Tripod as these both use a 3/8"-16 mounting connection.

Q: 8. What is the overall height of the Oben BC-166 ball head?

A: The Oben BC-166 Ball Head is H: 4.7" / H: 11.9 cm.

Q: 9. There is some loose play in the single lever on mine and I don't know if they all do that or if mine is a problem. I do not like the feel of it. I've tried to tighten via the one hex nut holding it on but it won't budge. Is this loose play normal or do I have a bad Oben? BTW, I'm talking about very little movement, maybe 1 to 2 sixteenths of an inch but it's enough for it not to feel right to me.

A: We have had ours for at least a year now and use it on average 2-3 times per week. Nothing is loose.

Q: 10. how fast/slow is the pan function? I am looking to use it with a sidekick.

A: It is very fast and smooth, depending on how you have it adjusted.