Looking to rackmount your Analog Four MKII or Analog Rytm MKII? Check out the Elektron RMK-3b Rackmount Kit, which features two 5 RU rack ears in black and includes four hex screws.

For Analog Four MKII & Analog Rytm MKII    Two 5 RU Rack Ears and 4 Hex Screws

Related Questions and Answers

Q: 1. Can this convert a 35mm film camera sdi analog output into a digital SDI output?

A: Only if the film camera has RGB output. I use it for RGB analog Cameras [BRCZ330] and convert the DB15 to BNCs using only the Red, Green and Blue wires.

Q: 2. How many analog signals in the input and SDI outputs?

A: There is one input, and two SDI outputs.

Q: 3. Hi. I have an old professional VHS camera that has BNC video output. So to capture the video to my Mac book, first I have to use this analog-sdi converter, after I have to connect it to the Design UltraStudio Mini Recorder, and after connect all this to laptop? And what’s the difference if I will use Elgato USB Analog Video Capture Device Instead of all this, connected to the camera via bnc-s-video cable ( it passes the color) and connected to laptop via usb? Thank you very much for your answer!

A: If you use the Blackmagic Design Mini Converter Analog to SDI, it will convert the analog signal to digital and then the Blackmagic UltraStudio Mini Recorder could be used. However, the Elgato USB analog video capture device could be used as a more direct solution to convert an analog source. The only major advantage in using the Blackmagic solution would be to use Blackmagic's Media Express software (free download) to encode it into a variety of formats, such as Apple Prores.

Q: 4. Will this possibly work with a pocket Wizard Power ST4?

A: No, this Skyport USB RX MK II Transceiver cannot work with the Pocket Wizard Power ST4.

Q: 5. I am converting old Betacam SP component out 4:3 to SDI Atomos input. I am assuming the Atomos is not capable of dealing with 4:3? Is there another way of transferring 4:3 original scale to MP4 or Mov?

A: From the Blackmagic Mini Converter Analog to SDI I would go into a capture device for a computer. Once the signal is going into the computer, you can use a variety of recording software to properly record the video in a desired aspect ratio.

Q: 6. are all the pins supposed to be up ?

A: I am guessing you mean the DIP Switches. These switches would be set according to how you want to run this converter. Some of the settings include Analog or AES audio and channel selection. The switch settings are listed on the back of the unit.

Q: 7. Does this interface work with Beyerdynamic DT 990 Pro (250ohm)? Does the interface have an amp or do I need a separate one to make the headphones work?

A: Yes, the Audient iD4 MKII Desktop 2x2 USB Type-C Audio Interface has a built-in headphone amplifier that will accommodate the Beyerdynamic DT 990 Pro headphones without the need for a separate headphone amp.

Q: 8. If there is no dedicated headphone volume knob, how do you control the headphone volume?

A: The Audient iD4 MKII USB-C Audio Interface (BH # AUID4MKII) features headphone volume control via the DAW or the big knob volume level controller.

Q: 9. I just ordered the Mini Converter Analog to SDI. We're trying to move analog to digital. I'm not interested in rescaling the materials but just getting it digital. I see how to get the signal in for composite and component but what about S-VHS? It seems that I need to use 2 BNC connectors on the box. How do I do that when S-VHS had the old standard S-VHS cable.

A: I think you need a different box to accomplish what you want to do.

Q: 10. does this interface work with Beyerdynamic DT 990 Pro 250 version?

A: These headphones will be compatible with the headphone output of this interface, but due to the headphones' impedance you may need to turn the volume up higher than usual if you are not using them with a separate headphone amplifier.