Designed by Rycote to protect your additional or spare Nano Shield basket sizes, the Nano Shield Case 20 holds two basket halves in AA or BA combinations. Use this hard case to protect your spare baskets or for transporting extra basket sizes for more options during a complex, on-site production.

Hard Case for Nano Shield Baskets    Holds AA and BA Combinations    Protects Additional or Spare Baskets

The Nano Shield kits use a unique magnetic locking basket design which can be configured to fit various microphone sizes by simply swapping out basket halves. Each size of basket half can interlock with any other size. They also have two manual locking sliders to hold everything secure and noise free. Quickly and easily access mics by simply pulling the halves apart.

Related Questions and Answers

Q: 1. The handle bottom is not threaded and so It's unclear how to mount this on to a boom pole??

A: There is a thread on the bottom of the shock mount that will mate with any standard bom pole threading.

Q: 2. Can this screw onto a boom pole? If so, what are the thread specs?

A: Yes, the Blimp can be attached to a boompole, threading size is 3/8"

Q: 3. Is this filter cable also a pre-amp? How does the mic get power if it bypasses the pre-amp module?

A: The Rycote Nano Shield MZL to XLR-3M Cable is only a cable and filter. Power would be acquired through phantom power from the mixer or recorder that the XLR-3M side is connected to.

Q: 4. I would like to remove the handle from this and mount it to a camera cage with a 3/8-16 or 1/4-20 screw. Would that be feasible by threading it through the hole the handle clamp screws through?

A: No problem grippper will attach to your rig as long as you have a 3/8 thread

Q: 5. Will my sennheiser 416 fit ?

A: The correct model of Super-Shield for the MKH416 is the Medium (MFR # 010321): a href= http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html target= _blank http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/a

Q: 6. Can you purchase extensions for this blimp?

A: A boompole such as : https://www.bhphotovideo.com/c/product/326895-REG/K_Tek_KE_110CC_KE_110CC_Avalon_Series_Aluminum.html Additionally: https://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/accessories

Q: 7. this is good for MKE 600I still have ME67ME66What else do I need to purchase?It can be applied

A: To clarify: Modular 5 will accommodate only the MKE 600 and ME 66; Modular 7 will accommodate all three, but is larger than required for the MKE 600 in particular.

Q: 8. will the new rode ntg5 fit?

A: Yes, it will fit the NTG-5, and Rycote also make a blimp specifically for that mic: https://www.bhphotovideo.com/c/product/1544185-REG/rycote_010326_super_blimp_windshield_kit_for.html

Q: 9. Will it fit Synco D1 ?

A: The Synco Mic-D1 Hypercardioid Shotgun Microphone is too long for use within the Rycote Super-Shield Kit for Shotgun Mics (Medium). The Rycote Super-Shield Kit for Shotgun Mics (Large) (BH #RYSSKL) is the proper choice for use with the Synco Mic-D1: https://bhpho.to/3U26PkT

Q: 10. How does this blimp compare with the rycote windshield kit 4? Looks like the only real difference is that the the super-shield does not have a real connbox. Need help picking one, thanks!

A: The Rycote Super-Shield Kits are a great cost effective solutions for heavy wind diffusion, but don't offer the same modular customization available on the windshield kits(4).