With the Christie QwikRig Rigging Frame V2, compatible Christie projectors can be secured to trusses or structures built for positioning the projector. This frame allows for up to three projectors to be stacked in landscape orientation, or a single projector to be positioned in portrait mode, but no stacking is permitted. Additionally, the frame is required for mounting GS and Inspire series projectors when using ultra-short-throw lenses.

For Christie GS & Inspire Series    For Securing to Trusses & Structures    Stack up to 3 Projectors in Landscape    Required When Using UST Lens

Related Questions and Answers

Q: 1. Does the Aktiv8 head work with VCT-14 quick release plate? Old school Sony, has 1/4 and 3/8 screws. How does the pin work with that?

A: Yes, the Sony VCT-14 plate will mount onto the Sachtler's aktiv8 quick release plate. The Sony plate has a series of 1/4"-20 and 3/8"-16 ports underneath that are spaced out so that the pin will sit in the 3/8"-16 port when screwing in the 1/4"-20. Apart from that, the aktiv8 main feature is centered around how the head mounts and clamps onto the tripod legs. This is a perfect setup for integrating with a VCT style workflow.

Q: 2. Does B and H have any photos from the X9 in 45mp stills mode? Can't find anything about its photo capabilities.

A: No, B&H does not currently house 45-megapixel photos from the DJI Inspire 3 Drone with the Zenmuse X9-8K Air Gimbal Camera.

Q: 3. Will this work for the Sony NEX-5?

A: Hi - thanks for asking! we are 99% sure it will work with NEX, but please drop us a line at support at redrockmicro dot com for complete details.

Q: 4. does this work with the sony aS7?

A: Hi Kevin - thanks for asking. The retroFlex-S for Sony Alpha works with any II series - A7R II and A7S II. It is not compatible with the first A7S or A7R.

Q: 5. a6000?

A: Hi! the retroFlex-S is currently compatible with just the Sony A5000 and A5100. thanks for asking!

Q: 6. Does a lens come with this kit?

A: No, the DJI Inspire 3 Drone does not include a lens.

Q: 7. What is better, the Touch and Go plate or the Sideload. What benefits does each offer?

A: The Touch & Go platform provides quick camera mounting with 2.4" of travel for balancing your rig and both 1/4"-20 and 3/8"-16 camera screws made for the serious shooter on the go working with multiple systems.

Q: 8. What are the pros and cons when comparing middle and ground spreaders? Thanks.

A: Mid level spreaders are fast, always clean and can be use on uneven terrain.. However, you cannot get as low as with a ground spreader. You might consider it a tad less stable. Ground spreaders get dirty and are not good on uneven terrain. They must be removed at that time. (No big deal) They are good on flat surfaces particularly floors with delicate finishes. They are a tad more stable. Conclusion: if you need speed and clean, use mid level. If you need maximum stability, and are on smooth floors. go ground.

Q: 9. Does the retroFlex-S cage fit the a6500?

A: Hi Claudiothanks for asking. It will work without being centered, but if you are set on that, you'll need to pick up some third party gear to make that work. An arca-swiss style plate with a screw slot should work just fine for that. I hope that helps

Q: 10. Is the plate on this an Arca-Swiss? Wondering if the Zacuto C70 cage would mount on the Aktiv6.

A: no, it is not an Arca-Swiss. Zacuto bottom plate has a 1/4" and 3/8" connection which will work with the aktiv6 camera plate