Free up desk space and find your perfect monitor viewing position with the Gabor GPW-50 Levitouch Single Monitor Wall-Mount Arm. The GPW-50 will support a monitor from 17 to 32 inches that weighs up to 19.8 pounds. Featuring a 21.2" articulating arm with gas-spring tension, the GPW-50 gives you smooth control over height, swivel, tilt, and rotation. Once in position, the gas-spring tension will hold placement without slipping or shifting. The included VESA plate will accommodate 75 x 75 and 100 x 100mm patterns, and the included hardware is suitable for wood studs and masonry surfaces.

For Displays Weighing 4.4 to 19.8 lb    Supports 17 to 32" Screen Sizes    Arm Extends from 3.5 to 21.2"    Gas-Spring Articulating Joints    75 x 75 to 100 x 100mm VESA Support    Landscape & Portrait Orientation    +90° to -45° tilt    180° Swivel Adjustment    Integrated Cable Management    Mounts to Wood & Masonry Surfaces

The GPW-50 is constructed to support a 17 to 32" monitor that weighs up to 19.8 pounds. Adding a monitor wall mount to your workstation moves your monitor off the desktop and frees up valuable space. Hardware for wood-stud and masonry wall installation is included.

Your monitor attaches to the GPW-50 via a VESA plate. The plate features 75 × 75 and 100 × 100mm VESA patterns for compatibility with most monitors from 17 to 32" in diagonal.

The gas-spring joints use compressed gas cylinders that are quieter and more reliable than mechanical springs, and there are no locking knobs to wrestle with. You can adjust the joint tension to prevent your monitors from shifting out of place, and just reach out and move your screen to wherever you want it.

The mount lets you position your monitor in landscape or portrait orientation and offers 180° swivel and +90° and -45° tilt so you can precisely position your screen for the best viewing.

Mounting your monitor onto a wall doesn't put it as far away as it seems. The arm reaches over 21 inches, which will allow you to sit comfortably to view your work, videos, or a zoom call.

The GPW-50 is thoughtfully designed with channels to let you route your cables and keep them organized. Rather than hanging loosely, the channels keep your cables bundled together and out of sight.

Related Questions and Answers

Q: 1. Does this mount work for both 27 iMac and PC Monitors?

A: The 27 iMac with 5K Retina display is not VESA wall mountable.

Q: 2. Will this support vertical mounting of monitors?

A: Yes. The monitor can be rotated to any angle.

Q: 3. Would my MSI monitor be too heavy for the arm? It weighs in at 19.215lb. BH #MSSAMSG274R2 MFR #OPTIXMAG274R2

A: The Gabor Levitouch Dual-Arm Desktop Monitor Mount for Two 17 to 32" Displays BH #GADM552 holds displays up to 19.8 lbs. each. The MSI Optix MAG274R2 27" 16:9 G-SYNC 165 Hz HDR IPS Gaming Monitor B&H # MSSAMSG274R2 weighs 13.34 lbs.

Q: 4. I have a one inch lip on my desk top. Is this one inch enough material for the clamp to attach to?

A: No, the Gabor Levitouch Dual-Arm Desktop Monitor Mount for Two 17 to 32" Displays (B&H # GADM552) should ideally have 2" of horizontal distance to clamp from the side of a desk.

Q: 5. Would the new Apple 27" display work in portrait mode on this stand?

A: Yes. The Gabor Mainmast DMS-200 Desktop Monitor Stand for 17 to 32" Displays BH #GADMS200 is compatible ith the included VEA adapter for the new Apple 27" Studio Display (Standard Glass, VESA Mount Adapter) BH #APMMYQ3LLA .

Q: 6. Will this work for Dell monitors?

A: The Gabor Mainmast DMS-202 Desktop Dual-Monitor Stand for 17 to 27" Displays BH #GADMS202 will work with Dell monitors that conform to the mount's specifications.

Q: 7. How close to the mounting edge can I place two 27" monitors? How much space does it require behind the desk? I want my monitors as far back as possible.

A: **Please note that this product has been discontinued and is no longer available.** At least a couple of inches.

Q: 8. Anyone have pictures of their monitor with this setup? I'm thinking of mounting Studio Display 27"

A: I am very sorry. W do not have any images of the Gabor Mainmast DMS-200 Desktop Monitor Stand for 17 to 32" Displays BH #GADMS200 fitted with an Apple Studio Display 27". These items should be compatible.

Q: 9. Can I buy a replacement mount, arm and VESA Plate?

A: The components that comprise the Gabor MD-AD13MB LCD Monitor Desktop Mount with Articulating Arm (Black) BH #GAMDAD13MB are not available for separate purchase.

Q: 10. Whats is the dimensions of the desk clamp? I'm Looking to clamp through a hole in my desk

A: I agree with Eric. The bottom side cylinder clamps probably would not work on the hole. I would suggest as resolution, to get a 1x1 wood block cut to cover the hole on the bottom then you could clamp the wood to the desk and solve the issue.