Expand the functionality of your synth with the Erica Synths Analog Sequencer Voicecard, a 5-step sequencer that generates CV/gate signals for the Bullfrog synthesizer. With the card inserted, the synthesizer utilizes an external controller (MIDI keyboard, MIDI sequencer, or CV/gate sequencer) to activate the sequencer.

The Steps switch determines the length of the sequence (3, 4, or 5 steps), while the Clock switch selects between an internal clock defined by the rate knob on the sample and hold module or an external gate (manual gate, MIDI, or external analog gate). The faders set the note value of each step, while push-buttons above turn off certain steps. Multiple Bullfrogs can be chained, so the sequencers all run at the same rate.

Expands Functionality of Bullfrog Synth    Five Step CV/Gate Sequencer    Faders Set Note Values    Push Buttons Turn Off Certain Steps    Step Toggle for 3, 4 or 5 Steps    Clock Toggle for Internal or External    Can Daisy-Chain Multiple Bullfrogs

Related Questions and Answers

Q: 1. Does it take a standard or universal sustain pedal?

A: It will take many brands of sustain pedal. The one that seems to be the best one for the Casio WK-7600 is the M-Audio SP-2 Universal Keyboard Sustain Pedal. We have it at B&H and the part number is B&H # MASP2. I have attached a photo of the pedal for you.

Q: 2. I am converting old Betacam SP component out 4:3 to SDI Atomos input. I am assuming the Atomos is not capable of dealing with 4:3? Is there another way of transferring 4:3 original scale to MP4 or Mov?

A: From the Blackmagic Mini Converter Analog to SDI I would go into a capture device for a computer. Once the signal is going into the computer, you can use a variety of recording software to properly record the video in a desired aspect ratio.

Q: 3. I just ordered the Mini Converter Analog to SDI. We're trying to move analog to digital. I'm not interested in rescaling the materials but just getting it digital. I see how to get the signal in for composite and component but what about S-VHS? It seems that I need to use 2 BNC connectors on the box. How do I do that when S-VHS had the old standard S-VHS cable.

A: I think you need a different box to accomplish what you want to do.

Q: 4. Does this down scale the HD SDI video when converting to analog?

A: Yes.

Q: 5. are all the pins supposed to be up ?

A: I am guessing you mean the DIP Switches. These switches would be set according to how you want to run this converter. Some of the settings include Analog or AES audio and channel selection. The switch settings are listed on the back of the unit.

Q: 6. How many analog signals in the input and SDI outputs?

A: There is one input, and two SDI outputs.

Q: 7. converters?

A: Converts SDI digital to component or composite with analog audio on 1/4 outs

Q: 8. Can I use this to go from hd sdi drone a video switcher preview output to a rd connection and split it to send a video signal to multiple screens

A: This will make an analog video signal from SDI. Not completely sure of your workflow.

Q: 9. I just bought this Analog to SDI,for Sony nxcam hxr-nx3/1 to BM ATEM. Can anyone help how to setup up?

A: Not much to set up. As I recall there are some switches on it to set as. I connected it and flipped the switches until I stumbled onto the right combination.

Q: 10. I have a HS 600 data video with SD-SDI output at 720 by 576i. Can this converter convert the signal to HD-SDI?

A: No, this converter doesn't upconvert video, it just converts it from analog (component/composite/s-video) to SDI. The Mini Converter UpDownCross HD though, can upconvert SD-SDI to HD-SDI https://www.bhphotovideo.com/c/product/1401679-REG/blackmagic_design_convmudcstd_hd_mini_converter_updowncross_hd.html