Expand the functionality of your synth with the Erica Synths Highpass VCF Voicecard, an expansion card for the Bullfrog synthesizer that expands the sound treatment capabilities of the instrument by bringing a high-pass voltage-controlled filter into the mix, allowing for the exploration of high-pass and bandpass filtering under CV control.

The voice card features typical VCF controls including cutoff frequency, resonance, and CV level. The CV source switch allows for selecting between three CV sources (envelope generator 2, Sample & Hold, or LFO). The voice card features internal audio connections that pass the signal from the output of the mixer into the highpass VCF, which outputs to the low-pass VCF and VCA. For more flexibility, no CV connections for the Bullfrog are present on the voice card, so you have to do the patching yourself.

Expands Functionality of Bullfrog Synth    Adds High-Pass Filter with Resonance    CV Source Toggle    Switch Between EG2, S&H, and LFO    Inserted Between Mixer and Low-Pass VCF

Related Questions and Answers

Q: 1. Are the wheels removable for storage?

A: Yes, although they need to be unbolted (no quick release or anything like that).

Q: 2. Can this monitor paired with the dji transmission and lidar control the red komodo in camera settings through the touch screen?

A: No, the DJI High-Bright Remote Monitor does not support camera control for the RED Komodo.

Q: 3. The On-Stage LSB-6500 shows up as a bag for it under the accessories tab. Does the bottom with the wheels on actually fit in it?

A: Yes, but its a very tight squeeze. we suggest the following unit for a better experience. Matthews C-Stand Rolling KitBag for 3 Stands (Black) BH #MA339776 • MFR #339776 https://www.bhphotovideo.com/c/product/1356864-REG/matthews_339776_c_stand_rolling_kitbag_holds.html?sts=pi

Q: 4. Does this come with the 5/8 studs? If not, which would best be used to mount an Avenger D600 mini boom? Thanks in advance.

A: This stand has a retractable 5/8 stud that is off center and you can mount an Avenger D600 to it. If you would like to have the boom in the center of the column, you may use the following adapter: a href= http://bhpho.to/1A8oJ5e target= _blank http://bhpho.to/1A8oJ5e/a

Q: 5. Is there a way to output the image without the adapter from this monitor?

A: The DJI High-Bright Remote Monitor does not offer an output such as SDI or HDMI.

Q: 6. Is the listed minimum height with the center column raised or lowered?

A: The Kupo High Baby Stand (13.75') minimum working height is 55.5" / 141 cm.

Q: 7. Can you buy the retractable triple function combination head by itself w/o the stand?

A: The triple function head built onto the top of the Kupo High Roller Stand (14') is not available as a separate accessory. It is dedicated to this light stand.

Q: 8. Can the DJI Hight-Bright Remote Monitor transmit a video signal from it's HDMI input wirelessly like the Holland Mars M1?

A: The DJI High-Bright Remote Monitor is a receiver only, not a transceiver, and so is not able to transmit video signals that are input via the HDMI port on the monitor. A separate transmitter would be required to transmit the HDMI signal.

Q: 9. Which locking casters fit this stand?

A: There are no casters currently available for the Kupo High Baby Stand (13.75').

Q: 10. What is the measurement of the square legs? Does anyone know if they are any of the following: 22mm, 25.4mm, or 30mm?

A: The leg diameter of the Kupo High Baby Stand (13.75') is 22mm.