The Blink 500 ProX TXR from Saramonic is a miniature clip-on microphone/transmitter with onboard recording function available as an individual component to expand your existing wireless setup or for use as a backup transmitter. When used with a Blink 500 ProX RX, RXDi, or RXUC receiver (all available separately), the system offers an ultracompact solution that lets you record one or two wireless mics to cameras and smartphones (depending on the receiver used).

The tiny transmitter weighs just over 1 oz and features a built-in clip and an omnidirectional microphone, making it simple to attach to a lapel or shirt for quick and easy true-wireless audio. For a more discreet look, you can plug the included SR-M1 lavalier microphone into the 3.5mm input jack and use the Blink 500 ProX TXR as a beltpack transmitter. The system uses digital technology in the 2.4 GHz bandwidth to ensure reliable wireless transmission with a maximum line-of-sight range of 328'.

For Blink 500 ProX RX, RXDi, and RXUC    Tiny Transmitter with Onboard Recording    Built-In Mic, 3.5mm Input for Lavalier    328' Line-of-Sight Transmission Distance    Built-In Rechargeable Battery    Mute Button    Mic- or Line-Level Input

The Blink 500 ProX TXR from Saramonic is a miniature clip-on microphone/transmitter with onboard recording function available as an individual component to expand your existing wireless setup or for use as a backup transmitter. When used with a Blink 500 ProX RX, RXDi, or RXUC receiver (all available separately), the system offers an ultracompact solution that lets you record one or two wireless mics to cameras and smartphones (depending on the receiver used).

The tiny transmitter weighs just over 1 oz and features a built-in clip and an omnidirectional microphone, making it simple to attach to a lapel or shirt for quick and easy true-wireless audio. For a more discreet look, you can plug the included SR-M1 lavalier microphone into the 3.5mm input jack and use the Blink 500 ProX TXR as a beltpack transmitter. The system uses digital technology in the 2.4 GHz bandwidth to ensure reliable wireless transmission with a maximum line-of-sight range of 328'.

• The TXR features 8GB of internal memory capable of storing up to 14.8 hours of 16- or 24-bit audio at 48 kHz in lossless .WAV formats. An inset tactile switch can toggle recording on and off and ensures accidental jostling will not affect the transmitter.
• Input level control, mute, and selectable mic- or line-level inputs allow you to customize your audio experience even further.

The transmitter is powered by an internal, 400mAh, rechargeable lithium-ion battery that can run for up to 11 hours when not in recording mode. When onboard recording is toggled, the battery life is reduced to 8.5 hours. Recharge the battery via USB-C port, which can also power the unit if connected to AC power. A charging cable is included with the transmitter.

Related Questions and Answers

Q: 1. Can a shotgun mic with a 3.5mm trs connector, like the Sennheiser Mke 600, be used connected to the transmiter?

A: Yes, the Sennheiser MKE 600 Shotgun Microphone can be connected to the 3.5mm min input on one of the transmitters for the DJI Mic 2 2-Person Compact Digital Wireless Microphone System/Recorder. The MKE 600 will need to be powered with a AA battery.

Q: 2. Does the case have its own battery?

A: The DJI Charging Case for Mic 2 has an internal 3250mAh battery which can be recharged with the USB-C Charging Cable provided.

Q: 3. What is the internal recording memory of this transmitter?

A: The Saramonic TXR features 8GB of internal memory capable of storing up to 14.8 hours of 16- or 24-bit audio at 48 kHz in lossless .WAV formats.

Q: 4. What is the operating time of the transmitters while it will be recording 32-Bit float all the time?

A: The transmitters and receiver for the DJI Mic 2 2-Person Compact Digital Wireless Microphone System/Recorder have a battery life of up to 6 hours. Recharging takes approximately 70 minutes.

Q: 5. The Receiver has a single TRS 3.5mm Output. Will the two Receiver channels get collapsed into Mono for Output?

A: According to page 16 of the manual for the DJI Mic 2 2-Person Compact Digital Wireless Microphone System/Recorder for Camera & Smartphone (2.4 GHz), you can toggle between "S" (stereo), "M' (mono), and "MS" (safety track) recording modes. Here's the link to the manual: https://bhpho.to/4giNPd2.

Q: 6. Will the recorder mic record voices (typical talking volume) from a distance? Is there an estimated range?

A: The DJI Mic 2 2-Person Compact Digital Wireless Microphone System's built-in microphones are designed for close-range use only. They should ideally be clipped to the clothing of the persons speaking. If this is not possible, they should be held no more than one foot from the mouth for best results.

Q: 7. Can I purchase a second transmitter at a separate time, and pair it with the receiver from the first purchase?

A: Yes. The DJI Mic 2 Clip-On Transmitter/Recorder with Built-In Microphone (B&H # DJMIC21TXSBK) can be added to the DJI Mic 2 Compact Digital Wireless Microphone System/Recorder for Camera & Smartphone (B&H # DJMIC21TX1RX) as a second transmitter.

Q: 8. Is the DJI Mic 2 specifically compatible with the Sanken COS 11-D with the locking connector for Sennheiser?

A: Yes, the Sanken Cos-11D wired for Sennheiser is compatible with the DJI Mic 2 2-Person Compact Digital Wireless Microphone System.

Q: 9. Does it work with the locking connector on the MK2 lavalier mic? The DJI 1 didnt work with it

A: The Sennheiser MKE2 is known to be incompatible with the DJI Mic 2 2-Person Compact Digital Wireless Microphone transmitter units.

Q: 10. This works with the Osmo Action 4 correct? I only need this one unit? No wires/connection required?

A: Yes, the DJI Mic 2 Clip-On Transmitter/Recorder with Built-In Microphone (2.4 GHz, Shadow Black) is compatible with the DJI Osmo Action 4 Camera. The camera can connect directly to the transmitter via Bluetooth, so there is no need to use a cable or to plug in the DJI Mic 2 Receiver.