The 20' Remote Audio CABETASD664 ENG Breakaway Output Cable with Timecode for Sound Devices 664 connects to the recorder via a 10-pin Hirose connector and transmits a pair of balanced audio outputs to a camera over two XLR connectors. It also uses a dedicated 5-pin LEMO to BNC line to transmit timecode from your Sound Devices recorder to a camera.

The cable features a stereo return for sending the camera's headphone output to the 664, as well as for sending the 664's headphone output to the camera operator's headphones, allowing for safe monitoring of the audio signal at the recorder's output.

The CABETASD664 comes with a carabiner for wrapping the extra slack and attaching the breakaway cable to equipment or a belt while on set.

Breakaway Assembly for Sound Devices 664    Send 664 L/R Audio Output to Camera    Send 664 Timecode to Camera    Send Camera Stereo Headphone Out to 664    Camera Operator Monitors 664 Output Mix    Length: 20'    Attachment Carabiner

• Breakaway output cable with 10-pin Hirose connector for Sound Devices 664 
• Send 664 pair of balanced audio outputs to camera—via two XLR male connectors
• Send 664 stereo mix out to camera operator headphones—via 3.5mm female connector
• Send camera stereo headphone mix out to 664—via 3.5mm male connector
• Send 664 timecode out to camera—via 5-pin LEMO to right-angle BNC
• Color-coded XLR connectors
• Attachment carabiner

Related Questions and Answers

Q: 1. what the it can to mixpree 10 ii?

A: The PortaBrace Sound Devices 664 Audio Mixer Combination Case would not be recommended for the Sound Devices MixPre-10 ii; the PortaBrace Silent Audio Organizer Bag for Sound Devices MixPre-10T Recorder (BH #POAOMIXPRE10) would be recommended instead.

Q: 2. Is there another version of this cable that has a true stereo RTN?

A: The RTN L+R pins are summed to a single pin as a limitation of the 8pins available in these NeutriCon connectors. To give the Timecode's ground isolation from the XLR audio (to avoid that pesky TC Bleed), they are out of pins. The cable itself has enough wires to accommodate a true stereo return... it crossed my mind to replace the connectors with XLR-10pin, but those are not as easily "breakaway-able". So either way, it's a trade-off.

Q: 3. Is the RTN on this cable really mono? The Sound Devices 302 and 633 both expect stereo return.

A: The return on this cable is mono, using a balanced (stereo) 3.5mm connector which is compatible with the Sound Devices units.

Q: 4. Would this work between the RODE Wireless Pro Receiver and an FX6 BNC port?

A: The Sound Devices BNC to USB-C Timecode Cable for A20-Mini has not been tested with the Rode Wireless Pro, so unfortunately compatibility cannot be guaranteed.

Q: 5. Would this work on Zoom f8n or even Mixpre-6II?

A: The Remote Audio ENG Breakaway Cable with Timecode for The Sound Devices 633 has a 5-pin LEMO connector for timecode to accommodate the 633, but the Zoom F8n uses BNC for timecode input/output and MixPre-6 II both uses 3.5mm for timecode.input/output. Other than that, the XLR and 3.5mm connectors on the Remote Audio cable are compatible with both recorders.

Q: 6. Would this cable work for video between a DVR and camera?

A: Not at all: The Remote Audio BNC to 1/8 (3.5mm) Timecode Cable is a 3' (0.91m) input cable designed for use with Apple iDevices such as the iPhone, iPod, and iPad. It consists of a BNC male connector on one end and a 1/8 (3.5mm), 4-conductor iDevice plug on the other.

Q: 7. Is there an extension cable available for this?

A: There is only a 50' time code cable.

Q: 8. Can I use this with a Zaxcom ERX?

A: The Remote Audio CATCIPBNC Timecode Cable is an input cable designed for use with Apple iDevices such as the iPhone, iPod, and iPad. For the Zaxcom ERX, you may use the Remote Audio CATC1/8BNC (B&H #RECATC18BNC).

Q: 9. Do you sell and extension cable?

A: If you are extending the length of the XLR connections on the Remote Audio CABETASD633 ENG Breakaway Cable, you can use two standard XLR cables such as the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - Black, 25' (B&H # KOM3025), in the length you prefer. If you need to extend the length of the 3.5mm connections, you can use a standard aux extension cable such as the Pearstone 3.5mm Stereo Male to Female Extension Cable - Black, 25' (B&H # PEMMSB125B), in the desired length.

Q: 10. - Can this be connected to A20 or A30 aviation headsets? - Would it provide power to the headset? - 5 pins or 6 pins?

A: The Sound Devices 5-Pin LEMO to USB-C Timecode Cable for A20-Mini is intended for use to send timecode to the Sound Devices A20-Mini Digital Wireless Bodypack Transmitter and Recorder (B&H # SOA20MINI). This cable will not work with aviation headsets.