This Cat 6 Shielded Keystone Feed-Thru Coupler with White Locking Tab from Simply45 features a nickel-plated zinc alloy housing with a white locking tab. Each coupler in this 25-pack provides feed-through patching via a standard patch panel, keystone wall plate, or surface mount box. The snap-in RJ45 Cat6 Shielded connector jack is simple to install and provides a robust female to female in-line RJ45 Cat6 connector coupler. The nickel-plated zinc alloy metal housing shields your connection from interference and the gold-plated connectors make a good corrosion-resistant connection.

For Keystone Patch Panels & Wall Plates    Female-to-Female RJ45 Connectors    50μ Gold-Plated Connectors    Snap-in Design / Slim Style

Related Questions and Answers

Q: 1. I don't understand the FPP instructions on loading the sheet film holder; the emulsion is doublesided; is there a preferred way?

A: According to the manufacturer, the Film Photography Project Black and White Negative X-Ray Film (4 x 5", 25 Sheets) is notched like traditional 4x5 film. That being said, as it has double-sided emulsion, you should be able to load the film in any direction. As the film is blue-light sensitive, if you so choose, you may visually load and unload the film in a darkroom under a red safe-light such as the Delta 1 Brightlab Universal Red Junior Safelight 11 Watt, B&H # DESLJ. https://bhpho.to/3Issmhv

Q: 2. How do you process it?

A: You may use the CineStill Film D96 B&W Film Developer (To Make 1L), B&H # CID96BWD1L​, or the Kodak Professional HC-110 Film Developer (1L, 2019 Version), B&H # KOHC110DEV​, to process the Film Photography Project B&W Negative X-Ray Film.

Q: 3. Do this have a notch for identifing the emulsion side?

A: Rollei Infrared 400 Black and White Negative Film (4 x 5", 25 Sheets) does have a notch for identifying the emulsion side.

Q: 4. Are there known developing times for this film with PMK Pyro?

A: The developing time for Film Photography Project Black and White Negative X-Ray Film (4 x 5", 25 Sheets) in Photographers' Formulary PMK Pyro-Metol Kodalk Developer is around 3.5 minutes at 68F (20C). The film has a blue and green sensitivity. This enables the film to be processed by inspection under a red safe light.

Q: 5. What are the specific filter that one should use with this film?

A: Hello, if you want the most pronounced infrared effect with this film, I'd use the Kodak Wratten 87, however this will mean shooting a a very slow ISO speed due to the filter factor. An all around easier filter to use would be Hoya R72, which allows a bit more of the visible light spectrum reach the film.Rollei's Infrared film is sensitive up to 820nm. The Kodak-Wratten Filter would block everything below 795nm, and the Hoya R72 block all light below 720nm.Using Kodak-Wratten 87: I'd meter for ISO 16-25. Infrared light can be unpredictable, so bracketing shots would be advisable. Hoya's R72 blocks a little less light, so I'd shoot at ISO 25-50.If you meter for ISO 400, add 4-5 stops, otherwise meter at the lower ISO values. Something that helped me get more familiar with my filters was to shoot a less expensive 120 roll, and record what each shot was exposed at. That way I made almost no mistakes on the more expensive 4x5.Hope that helps, ...good luck!

Q: 6. Does this work with the DMON-QUAD and what kind of power-in port does it have? 3 pin IEC?

A: It has a standard hole in the center that accepts a pin and a ring on the outside. The ring is only for locking on. Two conductor only

Q: 7. What ISO is this Film?

A: According to the manufacturer's website, they state the suggested speed for outdoor usage is ISO 10 in sunlight, and the suggested speed using strobe/flash is ISO 5.

Q: 8. Is this TCL tablet unlocked for any GSM carrier including T-Mobile, AT&T, MetroPCS, etc? Thank you.

A: Yes, this TCL 10.1" Tab 10 5G Tablet is unlocked for any GSM carrier.

Q: 9. Is the white "Thorens" logo also shown on the back side? I would prefer a platform with no company logo showing.

A: No, there is no Thorens logo on the back of the TAB 1600 Absorber base. It is only on the front of the base. You can turn it around so that you do not have to see the logo.

Q: 10. Can this disc burn 4K Blu-ray or do I need the one with the Blu-ray logo, VEM4X100GB25? I would really rather have one I can print an image on.

A: These are actually M-Disc discs and are meant for archival purposes, not standard media playback.