Equipped to make your bass guitar practicing easier than ever, the amPlug 3 Bass from VOX is the third generation of the celebrated compact amps. Sporting warm, dual-channel analog circuitry based on a classic bass amp sound, plus loads of accompaniment rhythms and three expansive stereo FX, amPlug 3 is ready to rock.

The amPlug amps are plugged directly into your guitar and offer the sound and feel of a full-size amp in a pocket-sized form factor. The looks and casing have been improved over previous generations for a more elegant feel. You also get a 3.5mm TRRS aux jack for use with smart devices and easy video recording. The amPlug 3 runs on two AAA batteries (included) and delivers up to a maximum of 16 hours of battery life.

Plugs Directly into Bass Guitar    Responsive Analog Solid-State Circuitry    9 Built-In Rhythm Patterns for Practice    CH1 for Wide Range, CH2 for Fat Punch    3 Stereo Effects Onboard    3.5mm TRRS Aux Jack for Smartphones    Up to 16-Hour Battery Life    Includes 2 AAA Batteries

Providing a standard bass amp sound, this version of amPlug 3 delivers stylistic versatility, ideal for pop, rock, or jazz. It features two channels, with Channel 1 offering a wide tonal range and Channel 2 delivering a fat, punchy overdrive.

The built-in rhythm function sports nine patterns, allowing you to easily practice in a range of styles without external tracks. Unleash your creativity and play along as you uncover new techniques and ideas.

The amPlug 3 line, available separately, includes a number of different amp models, so you can find the ideal companion for your practice style, or grab multiple amps for different moods:

• AC30: the well known VOX AC30 sound. CH1 is the warm normal channel and CH2 is the sharp top boost
• UK Drive: UK 100W stack amp sound. CH1 has a full vintage sound and CH2 has a sharp distortion sound
• US Silver: US combo amp sound, with a clean and warm clean tone on CH1 and a smooth soft drive sound on CH2
• Boutique: legendary boutique amp sound. CH1 is a bouncy clean, while CH2 is a bright and silky overdrive sound
• High Gain: modern high-gain amp sound, with a sparkling clean sound on CH1 and a sharp, aggressive high-gain distortion sound on CH2
• Bass: standard bass amp sound. CH1 has a wide range, CH2 has a fat, punchy overdrive sound. Ideal for pop, rock, and jazz
• Modern Bass: Modern bass amp sound with clear and bright CH1 and high-gain distortion sound with an edge on CH2. A more modern, aggressive bass sound

Related Questions and Answers

Q: 1. Will the mono switch help detect if one of the stereo channels is out of phase? In other words, if the left channel is 180 degrees out of phase from the right, this can be difficult to detect with headphones, but if the channels are summed to mono, the cancellation should be audible in each ear. Is this the case with this mono switch?

A: THE ONLY THING THAT IS EFFECTED IS THE LOW FREQ. SIGNALS. ONE IN THE RT. EAR & ONE IN THE LEFT. TELLING THE DIFF. IS HARD ENOUGH WHEN THE SOUND IS COMING FROM SPEAKERS. MAKE SURE OF THE SOURCES ARE CORRECT BEFORE YOU START. AS MY DAD ALWAYS TOLD ME WAS KISSKEEP IT SIMPLE STUPID WITH LOVE DR PETE

Q: 2. How clean is this in terms of hiss and self noise?

A: The Fischer Amps In-Ear Stick Portable Headphone Amplifier is designed to be silent and transparent, and as it does not use AC voltage there should be no possibility of ground noise or hum.

Q: 3. Does it work for mic input?

A: This works with headphone / mic combos only.

Q: 4. Can speakers be one of the outputs from this device?

A: A pair of amplified speakers may be connected.

Q: 5. Can we use the iFi audio ZEN CAN Signature Premium Desk-Fi Headphone Amplifier as a Preamp connected to a separate power Amp?

A: The iFi audio ZEN CAN Signature Premium Desk-Fi Headphone Amplifier is not intended to be used with anything other than a pair of headphones. The impedance of the current it puts out can reach the 600 ohms maximum of standard line output, but there would really be no purpose in connecting it to a speaker power amplifier and results are likely to vary based on the specifics of the use case. You also risk "loading down" a line level input if the output impedance is not set correctly, which will degrade signal quality.

Q: 6. Can I use this for Sound input? Want to connect mic into Mac or PC!

A: Yes, its 1/8" input may be used for microphone input.

Q: 7. what is the orgin of the product?

A: The country of origin for this product is China.

Q: 8. Dose it work on original xbox one

A: Yes it will work on the original Xbox One.

Q: 9. Please explain the mono switch. What I'm looking for his a device that will mix the stereo channels into mono and deliver the mono signal to both headphones channels. Can this unit do that?

A: The stereo/mono switch sums the stereo input to mono. In this mode all headsets connected will be fed a mono signal. (Same signal to both left and right).

Q: 10. What cables do I need and where do I hook My Behringer 800 headphone amp to ?

A: You will need 1/4 cables.The back of the headphone amp is 1/4 TRS cable. This will be put in line to your interface or audio mixer. Most often will be 1/4 TRS on the interface or mixer. Be sure that you won't need 1/4 from headphone amp to XLR on interface or mixer.Think about how far the amp will be from said gear to order,just enough length in your cables.I bought 6 cables since my amp sits on top of interface.Hope this helpsDanny