Enjoy professional-grade sound reproduction with the black Electro-Voice ZLX-8P-G2, a compact and versatile 8" 2-way 1000W Bluetooth-enabled powered loudspeaker featuring custom engineered drivers in a rugged enclosure, well suited for rental houses, mobile entertainers, stage monitors, and more. A built-in Bluetooth receiver allows wireless music streaming from a mobile device or computer and provides control over the speaker's integrated DSP. The internal 1000W Class-D power amplifier drives the 8" woofer and 1.4" high-frequency titanium compression driver, which combine for a frequency range of 50 Hz to 18 kHz (-10 dB), and a maximum SPL of 126 dB.

Two XLR-1/4" combo inputs, a 3.5mm aux input, and an XLR output accommodate typical connectivity with mixers, instruments, and more. Independent input/output gain controls and an LCD display with one-knob DSP control ensure efficient setup and signal adjustment. The sturdy polypropylene enclosure utilizes an EV-patented SST waveguide, and is covered by a powder-coated, 18-gauge steel grille. With its integrated pole cup, the ZLX-8P-G2 can be mounted on a speaker stand, placed on a subwoofer pole, or can be used on its side as a floor wedge monitor. It includes an IEC power cable.

For Live Stage, Theater, DJ Setups    Built-In Bluetooth Receiver    8" Woofer, 1.4" Compression Driver    Frequency Range: 50 Hz to 18 kHz (-10 dB)    1000W Class-D Power Amplifier    Two XLR-1/4" + 3.5mm Aux Inputs, XLR Out    LCD Display with 1-Knob DSP Control    EV-Patented SST Waveguide    Independent Input & Output Gain Controls    Pole-Mounted / Monitor

Bluetooth audio streaming for background music or musical accompaniment. The speaker also features True Wireless Stereo (TWS), allowing two speakers to connect via Bluetooth for wireless stereo operation.

EV Quick Smart Mobile application: quickly and wirelessly configure, control, and monitor up to six ZLX G2 loudspeakers simultaneously, and receive immediate notification during critical performance conditions.

Quicksmart DSP features best-in-class processing. Easy setup via presets, sub/top system match, three-band input EQ, seven-band output PEQ/GEQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via the full-color LCD.

High-efficiency 1000W Class-D power amplifier delivers up to 126 dB peak SPL utilizing transducers designed and engineered by Electro-Voice.

EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.

Front LED for power on and limit indication.

Durable polypropylene construction with high/low grip design for easy transport and mounting.

Related Questions and Answers

Q: 1. What will happen when starting 2020, most of the 600 mhz range will no longer be available to wireless mic users?

A: The Electro-Voice R300-HD handheld wireless microphone system in frequency band C operates below the 600 MHz range; 516-532MHz. You will have no immediate need to change your system. Here is some more information directly from the FCC.gov website: Wireless microphone users, whether licensed or unlicensed, may continue to operate on a secondary basis in the bands that continue to be available for and used on a primary basis by broadcast television (TV channels 2-36). Use of these TV band frequencies, which fall below 608 MHz, remain available for wireless microphone use after the incentive auction. FCC 15-100, FCC 15-99 Licensed wireless microphones may also operate on the specific frequencies in the 600 MHz duplex gap (652-657 MHz), and unlicensed wireless microphones may operate on a portion of the 600 MHz guard band (614-616 MHz) or a portion of the 600 MHz duplex gap (657-663 MHz). FCC 15-100, FCC 15-99, DA 17-314.

Q: 2. Does this microphone need a windscreen for outdoor use? The item description suggests the windscreen is built-in.

A: Yes you will need a windscreen for outdoor use. Why listen back to the best take of the day and say oh i can wind noise, why didnt i just put the cover on in the first place .

Q: 3. Will this record your voice and music on a card?

A: Hi, no this product does not record to a memory card, only playback.

Q: 4. does it have a rechargeable battery?

A: A rechargeable battery is not included or built-in.

Q: 5. Will this pop filter fit a Rode NT1000?

A: No, the On-Stage Pop Blocker for Electro-Voice RE20 and RE320 Microphones (Version 2) is not compatible for use with the RODE NT1000 Studio Condenser Microphone. The On-Stage Pop Blocker is designed specifically for the Electro-Voice RE20 and RE320 models, which are both front-address style microphones, while the NT1000 is a side-address microphone. You can use the Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and Booms (B&H # AUPFNY6), the 512 AUDIO Microphone Pop Filter with Gooseneck C-Clamp (B&H # 51512POP), the sE Electronics Dual Professional Pop Screen (B&H # SEDPP), or any similar pop filter which will cover the side of the microphone that picks up the sound.

Q: 6. Am having issues with my EV R300 set The RF signal is OK but no AF signal yet the channel on the receiver and transmitter is OK I have tried even changing the frequency but no help. What could be the problem? Regards

A: It could be a problem with the microphone itself, or MUTE may be slected; please check connections and replace mic if necessary. EV help: A: R300 how-to videos are posted at http://www.electrovoice.com/evtv.php?category=knowledge Factory Service (North America) If factory service is required, call service center for RMA# and shipping instructions: EV Audio Service c/o Bosch Security Systems, Inc. 8601 East Cornhusker Highway Lincoln, NE 68507-9702 U.S.A. Tel: 402-467-5321 or 800-553-5992 Fax: 402-467-3279 Enclose a note describing the problem along with any other pertinent information and how to contact you.

Q: 7. How would I connect a wireless microphone to this and if I could then which one would be compatible

A: Has to be Bluetooth that only way I see you doing it

Q: 8. I need. remote can I buy one

A: A replacement remote control can be purchased through the manufacturer, Pyle Pro.

Q: 9. I see on the back that it has a 12V 500mA input power jack. Does B&H sell an AC adaptor that works with this system? Also, does the microphone also require batteries, and if so, what type? Thank you!

A: Unfortunately the description of the Receiver does not indicate whether an AC adapter is included in the package as sold. The description, however, makes it very clear that the microphone (sender) uses 2 AA alkaline batteries which should work for 14 hrs.

Q: 10. We currently have HT 300 EV microphones. Are The HT300C compatible with the Receiver/Transmitter that we currently have? What is the frequency band that the microphones need?

A: The Electro-Voice HT300 handheld microphone/transmitter works with the R300 receiver. The R300-HD is the complete wireless mic system with the handheld transmitter. The HT300C transmitter operates within the "C" frequency band which is 516 to 532 MHz, so your receiver will need to operate on the "C" band as well. This is the only frequency band available for use in North America. We do offer the Electro-Voice R300 Wireless Microphone System Receiver (B&H # ELR300RXC) separately and the complete system with the transmitter and receiver, which is the Electro-Voice R300-HD Wireless Handheld Microphone System - C: 516 to 532 MHz (B&H # ELR300HD).